Showing results for: Soil Moisture Monitoring Equipment In Africa
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
, an HH2 Moisture Meter (readout unit) and a carry case. Three types of WET Kit are available – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please download our Soil Moisture Measurement catalogue or contact Delta-T Devices for ordering ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The ML3 ThetaKit provides researchers with a portable tool for highly accurate, near instantaneous measurement of moisture levels in soils and substrates. The ThetaKit is easy to use. Simply switch the connected HH2 Moisture Meter on, insert the probe pins fully into the soil, and press the HH2’s “read” button ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Dependable ± 3% soil moisture accuracy - Built in temperature measurement - Robust and buriable, with 5 year warranty. The SM150T measures soil moisture and temperature with research-grade accuracy. It offers stable, robust and reliable performance at a great price. The SM150T’s advanced patented electronics and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The kit comprises an SM150T* Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case. The cable and connector are watertight – an essential requirement for potentially wet environments. The HH150 Meter displays volumetric water content (% volume). Please note that although the SM150T Sensor has a built-in temperature ...
-
Distributed by Cropsystemsbased in SOUTH AFRICA
Covering intermittent soil moisture measurement, continuous soil moisture measurement and irrigation scheduling solutions for the turf market (golf courses, sports fields and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
Manufactured by Spectrum Technologies, Incbased in USA
WatchDog Sensor Pup WaterScout Irrigation Stations. 3 models to choose from, these pre-configured stations measure soil moisture with up 4 WaterScout sensors. Affordably monitor, compare and evaluate soil moisture levels from two, three, or four user-defined soil ...
-
Manufactured by Spectrum Technologies, Incbased in USA
WatchDog 1000 Series Watermark Irrigation Stations. 4 models to choose from, these pre-configured stations measure soil moisture with up 4 Watermark ...
-
Manufactured by Spectrum Technologies, Incbased in USA
WatchDog 1000 Series WaterScout Irrigation Stations. 4 models to choose from, these pre-configured stations measure soil moisture with up 4 WaterScout ...
-
Manufactured by Dacombased in NETHERLANDS
A TerraSen station BASIC consists of a TerraSen sensor with 5 sensors that measure soil moisture conditions, soil temperature and irrigation at several depths, a DSG 3.0 datalogger with solar panel and communication function. Complete with pole and wires. ...
-
Manufactured by Spectrum Technologies, Incbased in USA
Measures soil moisture tension from 0 to 200 centibars. The Watermark Soil Moisture Sensors is an established method of tracking soil moisture trends in crops, vineyards, or other areas where moisture level is a concern. Place sensors in the upper and lower thresholds of the root ...
-
Manufactured by AquaCheckbased in SOUTH AFRICA
The AquaCheck Classic probe is a capacitance-based soil moisture and soil temperature monitoring device offering up to 15 sensors per probe. The Classic probe requires an external logger or remote transmission unit and external power supply. Application: annual crops, orchards and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you