Refine by
Soil Moisture Temperature Ec Sensor Equipment & Supplies
8 equipment items found
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
GS3 has been discontinued and replaced by TEROS-12. ...
Manufactured by:Bio Instruments S.R.L. based inChisinau, MOLDOVA
The PTM-48A Monitor is truly state-of-the-art system for long-term automatic recording physiological characteristics of intact plants. The Monitor has four inputs for original automatic self-clamping leaf chambers. The chamber is normally open and shuts the leaf only for 30 seconds to take readings of both CO2 and H2O exchange rates. The short measurement time provides minimal disturbance of ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The HS2P is a combination of the Hydrosense II soil-water sensor with a strong handle and pole that make it easier to insert the probes into the soil. The lightweight pole allows soil testing without bending over. The HS2P is compact and portable, with the layout of the buttons on the display allowing for operation with one hand. Two different probe lengths are available, for different types of ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The HS2 is the handheld display for the new Hydrosense II soil-water sensor. When paired with either the CS658 or CS659 portable soil-water probes, it replaces the previous Hydrosense soil-water system. It features a new handheld display and a new probe design. The HS2 handheld has been designed to be compact and portable, with the layout of the buttons allowing for operation with one ...
Manufactured by:Spectrum Technologies, Inc based inAurora, ILLINOIS (USA)
Track soil moisture, salts, and soil temperature: all with a single sensor! Whether it’s container pots in a greenhouse or turf on a putting green, the salinity of the root zone is a critical element for healthy plant growth. Irrigation, fertilizers, and crop demand all impact salt concentrations. High levels can damage the plant: low levels can lead to nutrient ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS650 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. For this type of station, use the CS650-LC sensor instead, which ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The CS655 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric-water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. It has shorter rods than the CS650, for use in problem soils. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The SoilVUE™10 is a soil water content profile sensor powered by Campbell TrueWave™TDR technology. This soil moisture, electrical conductivity, and temperature profile sensor was developed with environmental researchers and environmental monitoring networks in mind. The SoilVUE™10 represents several exciting advancements in in-situ soil measurement that should make this an ...