Soil Preparation Equipment
-
Manufactured by Yigitsan Agricultural Machinerybased in TURKEY
RT600 are used preparing the field for planting.The machine is both necessary and efficient for potato. TR600 provides hard soil breakdown from 30cm depth. This situation provides better way to take advantage water and minerals in the soil. Thanks to RT600 ,increase in efficiency : about 35. Can be used from 120 to 150hp at ...
-
Distributed by Farmer 2000based in BULGARIA
Verso is a semi-carried, five-row cultivator with low traction resistance and a variable depth of processing from 0 to 10 cm. The flexible narrow tines with the width of 45 mm provide intense and fine soil processing. The tines are flexibly attached to the frame with the row distance of 57 cm with the possibility of deflection in case of an ...
-
Manufactured by Hortech srlbased in ITALY
Perfecta is the new soil preparation machine, with the same working system of the stone burier (model AI MAXI), or better, with a blade rotor assembled in the front of the machine that permits to work the soil deep into the ground from 5 to 20 ...
-
Manufactured by AnkaTechnica Agricultural Machinerybased in TURKEY
Working Width (mm) 1750, 2400, 3100, 3800, 4500. Working Depth(mm) 375-450, 375-450, 375-450, 375-450, ...
-
Manufactured by Yigitsan Agricultural Machinerybased in TURKEY
RT500 are used preparing the field for planting.The machine is both necessary and efficient for potato. TR500 provides hard soil breakdown from 30cm depth. This situation provides better way to take advantage water and minerals in the soil. Thanks to RT500 ,increase in efficiency : about 35. Can be used from 65 to 90hp at ...
-
Manufactured by Suokone Oybased in FINLAND
An efficient miller for cutting through stumps and surface land on peatlands. An efficient miller for cutting through stumps and surface land on peatlands. Preparing miller has been designed for the preliminary reconditioning of peat production areas and for annual basic reconditioning. The rotor, equipped with knife cutters, efficiently ...
-
Manufactured by Pierres & Caillouxbased in FRANCE
Working width: 1.86 m. One-piece rotor fitted with 8 weights. Required tractor power: 90 / 200 HP. Weight: 2,800 ...
-
Manufactured by Impex Agri Machinery Industry and Trade Ltd. Sti.based in TURKEY
Independent disc goble disc harrows, which are gradually replacing the classical heavy type goble disc harrows in Europe, are seen as the new generation goble disc harrows in the world due to their structure that allows serial use and the savings they provide in fuel and labor. Model TDG tapestry group is produced between 20 and 44 discs and is suitable for tractors between 80-220 ...
-
Manufactured by N.O.P.O.Z.M. s.r.o.based in CZECH REPUBLIC
SHORTDISK is used for plowing and soil preparation before sowing or planting. They are hanged from the three-point tow behind of tractor. The discs harrows can be customized to aggregate tubular roller, crosskil roller and other or with the optional hydraulic hitch seeder (seeding ...
-
Manufactured by Impex Agri Machinery Industry and Trade Ltd. Sti.based in TURKEY
Model PGD goblet disc harrows are used to break up the stems of plants such as sunflower, rice and wheat and to break the clods in the soil, as well as preparing the field for planting without inserting another agricultural machine, by performing clod-free tillage in dry months when plows cannot enter after ...
-
Manufactured by Forigo Roteritaliabased in ITALY
Basic machine: Hydraulic orbital engine. Lateral transmission driven by chain in oil bath. Automatic chain tensioner on spring. 4x speed "C" blades per flange. Adjustable rear hood by chain. Slitte laterali per la regolazione della Working depth. Requested oil capacity 40-50 l/min. Maximum pressure 200 ...
-
Manufactured by Religieux-Frèresbased in FRANCE
Doing the best for your soils with COMDOR SP , new agricultural spirit for preparation soil in one pass. COMDOR SP is an very flexible and interesting machine for spring and automn in all conditions. COMDOR SP, a new semi mounted combinator who gives a lot of possibilities and good results ...
-
Manufactured by Religieux-Frèresbased in FRANCE
2/ ROULEAUSANGE 600 roller for the efficient consolidation of preparations (a fundamental criterion for cultivating in simplified mode,combined with sowing from the rear of the equipment). In this case, use the TAPIR 105 packer on a drawbar. Thanks to its rear 3 point hydraulic lift, the COMDOR CR allows you to adapt seeders for the ...
-
Manufactured by MAT Engine Technologies, LLCbased in USA
Manual recoil easy start. Heavy duty constriction. Ergonomic butterfly handles. Includes 8" bit. 2 year limited warranty. EPA & CARB ...
-
Manufactured by Corner Machinery Ltd.based in TURKEY
Ploughs are produced with 11, 12, 13, 14 inches width by 2, 3, 4 and 5. It can easily work in rocky, stony lands. The hanger device ploughs are accepted in international standards and have all needed features to be fixed with tractor. To extend the working life of ears the front parts are produced in sections. 3 ironed trapeze typed.By turning process both noses are ...
-
Manufactured by Agrolead Agricultural Machinerybased in TURKEY
AGROLEAD Full-Automatic Conventional Plough With Spring Safety provide non-stop ploughing in rocky and rooted areas. Thanks to its’ automatic springs, it can easily disengage from roughness. Rising ability up to 100% than ploughing depth, offers an easier usage. It is adjusting screw, adjustable spring pressure feature; comprehensive usage choice with width adjustment opportunity, safety ...
-
Manufactured by Agrimerin Agricultural Machinerybased in TURKEY
The disc ploughs are produced as 2,3,4 and 5 discs version to perform in every type of soil for breaking, raising, turning and mixing of the soil. The disc ploughs are used to open new fields and handle stony areas as well. It allows an excellent solution for rooty, sticky or abrasive soil conditions and provides 20-30% fuel economy in ...
-
Manufactured by Demir Packing & Agricultural Machinerybased in TURKEY
The front press efficiently crushes and consolidated the soil. Roller serie is the ideal implement for preparation of light and medium soil types, whether it comes to leveling and consodilation of new ploughed soil or crushing and preparation of the soil. It consist of a solid main frame and a ...
-
Manufactured by Sovemabased in ITALY
GDE Series is suitable for tractors from 30 to 85 HP. Particular manufacturing solutions make this implement sturdy, reliable and cheap in mantainance. All sizes, on request, can be equipped with rear spike, cage or packer roller. Gear driven. Single-speed (GDE) or multi-speed (GDEC) gearbox, 4 or 6 blades per flange. Waterproof ...
-
Manufactured by Sovemabased in ITALY
Designed for small compact tractors, the RB-3 fixed rotary tiller, thanks to its sturdiness, reliability and versatility, can work any kind of soil without any problems. This implement mounts a single-speed gearbox, chain driven. Possibility to choose between 4 or 6 square or curved ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you