Supavac SV Solids Pumps are 100% air powered and operated, they feature vacuum loading and pressure discharge,no moving parts in contact with the product, intrinsically safe, mobile and can recover and transfer solids to 80% of the employed hose diametre.
Cornell solids handling pumps that can produce up to 200 PSI. Unique benefits, including the Run-Dry® System, Cycloseal and Redi-Prime®, make Cornell the benchmark in Agricultural pumping applications.
The NCCC two vane, solids handling pumps are used in a variety of aggressive applications. These pumps are used in commercial, industrial and municipal applications every day. The NCCC series solids handling, process pumps feature heavy duty casings, oversized shafts, close-coupled motors, optional metallurgies and Accu-Shock shaft protection. ...
1.Aipu shear pump adopted comprehensive mechanical seal2.New and chicly designed lead equipment more durable for long service life3.Make the bentonite hydration easier also save bentonite over 30%4.Strong power for polymer hydration provide high property drilling mud5.Decrease mud plate and fluids lose
Efficient cooling, lubrication as well as cleaning tools and products with a maximum pumpefficiency and optimal flexibility is no task for our new immersion DPVCI pumps. The pumprange is the result of over more than 55 years of experience and offers a broad and solid base forthese applications.
The solid sets irrigation systems have been used for several years: they are well know systems especially where there’re small areas to be irrigated or where a big area has to be shared by several farmers, each one paying attention to his limited surface.For many years this system has been used with aluminum or plastic pipes and with ...
The solid sets irrigation systems have been used for several years: they are well know systems especially where there’re small areas to be irrigated or where a big area has to be shared by several farmers, each one paying attention to his limited surface. For many years this system has been used with aluminum or plastic pipes and with ...
Elastomer Available in: Geolast, Santoprene, PTFE, Viton. Liquid Connections Available in: FNPT, FBSPT. Max Solids: 3/8 Inch (9.5mm). Max Suction Lift (Dry): 15ft-H20 (4.5m). Max Suction Lift (Wet): 31ft-H20 (9.4m). Air Inlet: 3/4 Inch FNP.
For the highest delivery rates; This vertical tubular casing pump has supports or is installed on a reinforced concrete floor with a supporting frame. Its use is recommended in cases where there is no solid pumping station bed to accommodate the vertical version (VP) or the bed is too deep down. This propeller pump achieves the highest ...
Horizontal-shaft, split-cased double-suction, singlestage pumps with volute casing for industrial and potable water supply systems, pumping plants, agricultural irrigation stations and fire-fighting systems. Horizontal- or vertical-shaft, single-stage doublesuction pump with volute casing splitted in the axial plain.
Crisafulli Vertical Pumps are dependable, powerful, and versatile. They are designed for stationary applications, such as sewage digesters and lift stations, manure tanks, chemical sumps, and dry docks. Each Crisafulli Ver
Agitate, mix and pump most viscous or solidified sludges from industrial, municipal and agricultural waste lagoons with a SRS Crisafulli slurry pump. The pumps also work well for refineries, municipalities and geothermal plants.
The close-coupled pumps with peripheral impeller series BASIC & ONDA have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials
KCR Horizontal pumps feature a heavy duty enclosed cartridge bearing design and large impeller passages for maximum solids handling with reduced wear. Capable of handling up to 70% solids, the Nagle KCR Horizontal Pump can tolerate a wide range of abusive and corrosive applications. This pump incorporates design features developed over more than ...
Submersible pump with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 220 m³/hour. ump diameters from 50 to 80 mm. Horizontal or vertical installation (shown here on base stand with vertical piping). Standard or extended knife system. Oil chamber between casing and motor.
HM snails pump is designed to handle liquid manure and difficult pumpable slurry. For tractor or electric operation. HM Snails pump is constructed as the basic principles HM slurry pump, but by means of a 'reverse' pump housing and heavy feed screw in a position to handle the slurry with a high solids content.
The close-coupled pumps with peripheral impeller series BASIC & ONDINA have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials.