Only show results in Virginia? Ok

solids pumping system equipment

  • Premium

    Model Certa - Pumps

    Superior viscous handling. EHEDG Type EL - Class 1. Up to 50% less power than other pumps. Low shear and virtually no pulsation.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM. from Pumps Product line

  • Solids Handling Pumps

    Cornell solids handling pumps that can produce up to 200 PSI. Unique benefits, including the Run-Dry® System, Cycloseal and Redi-Prime®, make Cornell the benchmark in Agricultural pumping applications.

    By Cadman Power Equipment Ltd. based in Courtland, ONTARIO (CANADA). from Solids Handling Pumps Product line

  • Solid Sets Irrigation Systems

    The solid sets irrigation systems have been used for several years: they are well know systems especially where there’re small areas to be irrigated or where a big area has to be shared by several farmers, each one paying attention to his limited surface.For many years this system has been used with aluminum or plastic pipes and with ...

    By IRRILAND s.r.l. based in Guastalla, ITALY. from Solid Sets Irrigation Systems Product line

  • Symphony - Model 532-1000 - High Power Diode Pumped Solid State Laser System

    The Symphony series of lasers are high power diode pumped solid state laser systems (DPSS) that emit single frequency green laser light at 532nm. These systems are based on Power Technology’s patented iMAT laser technology providing diffraction limited beam quality, intrinsic single longitudinal mode output and industry leading optical ...

    By Power Technology, Inc based in Alexander, ARKANSAS (USA). from High Power Diode Pumped Solid State Laser System Product line

  • Agri-Clean - Solids Separation of Animal Manure System

    System for Remove Solids and Nutrients from Animal Manure Wastewater. The purpose of the Agri-Clean System is to remove solids and nutrients from animal manure wastewater. The system consists of an Internal Drum Thickener (IDT), an Agri-Press Screw Press, a Dissolved Air Floatation (DAF) Clarifier, a twin polymer make-down system, a chemical feed ...

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Solid Sets - Cloned

    The solid sets irrigation systems have been used for several years: they are well know systems especially where there’re small areas to be irrigated or where a big area has to be shared by several farmers, each one paying attention to his limited surface. For many years this system has been used with aluminum or plastic pipes and with ...

    By IRRILAND s.r.l. based in Guastalla, ITALY. from Solid Sets - Cloned Product line

  • Triplex - Model WJC-U Series - Piston Pumps

    The pump WJC-U series is perfect for misting/fogging systems (greenhouses, climate control systems, industrial humidification systems, outdoor cooling, poultry, horse and cattle cooling, odour neutralization systems, dust control systems, special fog effects, etc.). Direct-drive to electric motors up to 2 HP (1450 RPM, solid shaft dia. 24mm, size ...

    By Idromeccanica Bertolini S.P.A. based in Reggio Emilia (RE), ITALY. from Piston Pumps Product line

  • Model TLK Series - Tractor Pump

    The TLK Series specifically manufactured for pumping animal waste containing solids in suspension. These pumps are equipped with a new chopper system able to reduce solid content and crumble fibers such as straw, leaves, forage residuals etc. contained in the pumped liquid. The new chopper not only avoids the pump and pipes from clogging but even ...

    By AgriBusiness International, Inc. based in Villa Rica, GEORGIA (US) (USA). from Tractor Pump Product line

  • DYNA Prime - Model l AP100-60 - Pump Set

    The ACME Dynamics DYNA Prime  model AP100-60 fully automatic, dry priming, trailer mounted 4 inch pump features heads up to 92 feet, flows to 634 GPM, and solids handling to 19/16' diameter. The unique, high-capacity priming system enables the pump to prime and reprime down to 30 feet within s

    By ACME Dynamics, Inc. based in Plant City, FLORIDA (USA). from Pump Set Product line

  • Side Channel Pumps

    Kit system, 1- to 8-level, compact, horizontal and vertical, for the conveyance of clean or cloudy liquids without solid additions.

    By DIA Pumpen GmbH based in Langenfeld (RHLD), GERMANY.

  • Master - Model MF3-mp - Irrigators with Pumps

    Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr.Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish.Model with hot galvanised ground support ...

    By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pumps Product line

  • Master - Model MDt8-MP - Irrigators with Pump

    Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground ...

    By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pump Product line

  • Model CF 100 - Centrifugal Irrigation Pumps

    Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rates. Suitable to pump clean water or non-aggressive liquids charged with small solid impurities. To be used in flow irrigation systems in gardening and agriculture and in industrial fittings.

    By Cospet based in Poviglio (Reggio Emilia), ITALY. from Centrifugal Irrigation Pumps Product line

  • Model CBM 60 - Centrifugal Irrigation Pump

    Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rates. Suitable to pump clean water or non-aggressive liquids charged with small solid impurities. To be used in flow irrigation systems in gardening and agriculture and in industrial fittings.

    By Speroni Spa based in Castelnovo di Sotto, ITALY. from Centrifugal Irrigation Pump Product line

  • Tractor Pumps

    The semplicity, the ease of moving and the relatively small size are elements which make these pumps ideal for portable irrigation systems, for operating self-propelled irrigators and for all cases of water pumping when the only possible drive is from a power take-off.

    By Vincenzi & Gibertini S.r.l based in Modena, ITALY. from Tractor Pumps Product line

  • Model BXH-F - Wobble Plate Pumps

    Shafts, bearings, connecting rods designed to endure heavy loads. Solid ceramic plungers and a professional sealing system along with space efficiency, high performance and low maintenance are some of the benefits for these pumps.

    By Idromeccanica Bertolini S.P.A. based in Reggio Emilia (RE), ITALY. from Wobble Plate Pumps Product line

  • Master - Model MF3-mp - Irrigators with Pump

    Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr.  Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground ...

    By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pump Product line

  • Master - Model Mm2-mp - Irrigators with Pump

    Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr.  Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground ...

    By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pump Product line

  • AgXcel - Model GX2 - Fertilizer System

    The system was designed to allow for the AgXcel electric pumps to utilize proper system voltage so that amps may be distributed evenly and managed evenly to both pumps. This equalization allows for the pumps to be driven evenly which allows for proper and even product draw which is critical to any precision application solution. When setting up ...

    By AgXcel, LLC based in Kearney, NEBRASKA (USA).

  • Marc - Model G7 - Pump for Grapes

    G7 PUMP for grapes (patented) 50 ton/hour, optimum performance and maximum reliability For the transfer of grapes, marc and semi-solid products (citrus fruit, fruit, oranges, olives, olive-pomace, meat, fish, prickly pear figs, , dates). It acts by pressure and not by centrifugal force, it ensures the best possible treatment of the pumped product ...

    By Strazzari S.r.l. based in Osteria Grande, ITALY. from Pump for Grapes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you