spray-fertilizer Equipment in New Mexico

  • AMC - Model 500 - Poly Weed Sprayer

    Dimensions: Height-56' Length - 164' Ground - 12' Wheel - 74' c/c Horsepower Requirements: 35-40 HP Pump: FMC-200-HYD-304 ACE Centrifugal 200 GPM/120 PSI Tank: 500 Gallon Poly Boom: Variable Boom Widths Spray Height Adjustment 3 Section Spray Capability Agitation: Sparse Tube Frame: Rectangular Steel Tubing 5'x3'.

    By Agricultural Manufacturing Company, Inc. (AMC) Office in Hermosillo, NEW MEXICO (USA). from AMC Fabricated Sprayers Product line

  • Row Crop Thinner

    The Agmechtronix Row Crop Thinner (RCT) is capable of thinning row crops such as lettuce using computer machine vision to identify plant locations and a herbicidal spray to eliminate the unwanted plants, replacing the traditional thinning method of hand labor.

    By Agmechtronix based in Silver City,, NEW MEXICO (USA).

  • AMC - Model 600-SS-TRB - Commercial Fabricated Sprayers

    Tank: 600 Gallon 304 Stainless Steel. Pump: 64 GPM / 700 PSI (Udor - Beta 240/CQ. Optional: 60 GPM / 800 PSI Piston Pump  Myers - 7360). Nozzles: Spraying Systems ConeJet (TeeJet). Horsepower Requirement: 70HP. Agitation: Mechanical. Frame: Rectangular Steel Tubing. Booms: Dual SS, 24 nozzles adjustable to canopy.

    By Agricultural Manufacturing Company, Inc. (AMC) Office in Hermosillo, NEW MEXICO (USA). from AMC Fabricated Sprayers Product line

  • LowDrift - Nozzles

    LowDrift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed.

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • INJET - Nozzle

    The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • MINIDRIFT - Nozzles

    The HARDI MINIDRIFT nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • Hardi - Model F-80 - Flat Fan Nozzle

    This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • HARDI - Foam Nozzles

    HARDI foam nozzles are excellent for application of liquid fertilizers. Choose foam nozzles for broad leaf application - the large air inclusion bubbles will be reflected on the leaves and minimize crop damage.

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • ZATURN - Orchard Mist Blowers

    Versatile - but uncomplicated, it meets your requirements for optimised small bush or large tree spraying. 1000 to 3000 L up to 55000 m3 air/h

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Orchard Mist Blowers Product line

  • DUOCAP - Flat Fan Nozzle

    HARDI DUOCAP gives you higher volume rate while still maintaining proper droplet size. Fitted with two Flat Fan or LowDrift nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying. Two different nozzles can be used.A Standard and a MINIDRIFT nozzle will give you the dual benefit of having fine droplets that ensures ...

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Sprayer Components- Nozzles Product line

  • Hydra - Model 16 - Clip Tree Shear

    16' one cut capacity. Perfectly flush ground level cuts. Built-in 10 gallon chemical spray tank. Optional Spray System and Tree Grapple. Cylinders angled to push directly at the tree providing the most cutting power of any shear

    By M&M Engineered Products L.L.C. Distributor in Albuquerque, NEW MEXICO (USA).

  • John Deere - Model 1770 NT - Planter

    Track kit for a 24 row 1770 NT John Deere planter. The track kit replaces four center frame tires with a pair of 16.5 inch wide tracks. This will give you about 4 times the foot print of the tires. These tracks will allow you to run fertilizer coulters and most other attachments you would normally use on your planter. The kit is a direct bolt on ...

    By John Deere Distributor in Albuquerque, NEW MEXICO (USA).

  • Hydra - Model 12 - Snip Tree Shear

    The most cutting power of any tree shear. Perfectly flush ground level cuts. Optional 9 gallon spray tank. Recommended 1200lb operating capacity loader. Minimum 2500 PSI, Recommended 3000 PSI

    By M&M Engineered Products L.L.C. Distributor in Albuquerque, NEW MEXICO (USA).

  • Hardi - Model NK - Sprayers

    The HARDI NK sprayer is one of the most versatile sprayers ever built. The NK is used by professional plant growers all over the world. It finds its use in traditional farming, horticulture, orchards, vineyards and on grasslands. The NK is a durable and well proven sprayer that offers far more features and options than you would expect from a ...

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Hardi Agriiculture Sprayers Product line

  • Hardi - Model MASTER plus - Liftmounted Sprayer

    All key functions on the MASTER plus are unsurpassed. The integrated Quick Hitch, the well arranged MANIFOLD fluid system and the versatile boom range are some of the key features making handling a pleasure and spraying efficient. The large range of high quality features makes the MASTER plus a perfect choice for the demands of the moders ...

    By Hardi International A/S Distributor in Las Cruces, NEW MEXICO (USA). from Hardi Agriiculture Sprayers Product line

  • Land-Pride - Model FSP Series - Broadcast Spreaders

    FSP Series rotary/spin type Broadcast Spreaders are capable of spreading seed, sand, salt, top dressings, lime, prilled/granular fertilizer, and most all other types of granular materials at delivery rates ranging from 43-890 lbs. per acre. Agitator extension comes standard. The spread rate, capability, and range of hopper capacities make FSP ...

    By Land Pride - Great Plains Manufacturing Distributor in NEW MEXICO (USA). from Seeders- Spreaders Product line

  • Model 9100 - Rigid Frame Planter

    Many operators are looking for a cost-effective planter that can capably handle the wide variety of planting conditions encountered on their operation. The model 9100 planter is engineered to accept a full complement of liquid or dry fertilizer attachments as well as row-unit-mounted or frame mounted tillage attachments that make it the ideal ...

    By Massey Ferguson - part of AGCO Corporation Distributor in NEW MEXICO (USA). from Planting & Seeding Product line

  • Land-Pride - Model PFS Series - Pendulum Type Broadcast Spreaders

    The PFS Series pendulum-type broadcast spreaders are capable of spreading seed, top dressings, prilled/granular fertilizer, lime, and iron at delivery rates ranging from 44 to 890 lbs. per acre with a spreading width of 20' to 46'. Optional spouts are available for narrow spreading, vineyard spreading between rows, and vineyards/orchards spreading ...

    By Land Pride - Great Plains Manufacturing Distributor in NEW MEXICO (USA). from Seeders- Spreaders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you