Refine by
Stubble Cultivators Equipment & Supplies
109 equipment items found
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Stubble cultivators (2 rows of teeth) Apus are designed for cultivating fields after maize harvesting, on concise and heavier soils. The machine is equipped with coulters with cutters (width: 490 mm), which ensure a deeper mixing of crop residues with the soil, and the roller (tubular or V-ring) that cooperates with it presses the fluffed soil to ...
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Stubble cultivators (3 rows of teeth) Apus are designed for cultivating fields after maize harvesting, on concise and heavier soils. The machine is equipped with coulters with cutters (width: 370 mm), which ensure a deeper mixing of crop residues with the soil, and the roller (tubular or V-ring) that cooperates with it presses the fluffed soil to ...
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Stubble cultivators Apus are designed for cultivating fields after harvesting. They are intended for use on lighter soils. The machine is equipped with duck foot shares, which cut the stubble in the surface layer, and the cooperating spring tooth harrow equalizes the surface and purges ...
Manufactured by:GERPRO Ltd based inNova Zagora, BULGARIA
Type: Trailed, with fuses, up to 6m. Cultivator weight: 6 840 kg. Working width: 4.6m. Working depth: up to 30cm. Recommended tractor power: 250 – 280 ...
Manufactured by:Religieux-Frères based inVigneux-Hocquet, FRANCE
Specially designed to defiber your straw while scratching your soil, the SPIDARO harrow has a wide choice of options available to gain versatility and efficiency. Destroys possible stocks of nematode eggs by exposing them to sunlight. / Grips the ground on the first centimeters of earth and also allows leveling. / Chop and accelerate the decomposition of crop residues and germinate weeds and ...
Manufactured by:Carre based inSaint-Martin-Des-Noyers, FRANCE
The Culti 4000 allows a work up to 25cm at 8km/h ! Its 4 rows make it a versatile tool and a best seller in our range. With choice spacing of 200 to 280 mm for fixed version and 200 to 250 mm for folding version the Chisel tine will a work in depth to promote the mixing. The number of tines can be adapted to suit your requirements. Available from 3 to 6.5m ! ...
Manufactured by:S & M Agricole based inBernolsheim, FRANCE
With the spring cultivator, operations such as tearing the soil, fluffing, airing, cutting the roots of weeds and bringing them to the soil surface are carried out. Besides these; It is also possible to mix the seed or mineral fertilizer thrown on the soil surface with the soil. Thanks to its independent mechanisms, it also allows intermediate hoeing of products such as sunflower, beet, corn, ...
Manufactured by:P.P.H. Mandam Sp. z o.o based inGliwice, POLAND
The KUS cultivator comprise a wide range of machines designed as a robust frame with two beams. The type of machines is used for pre-sowing and pre-planting cultivation as well as for stubble cultivation as they achieve excellent results thanks to perfectly performed undercutting and mixing of post-harvest remains. Two rows of ...
Manufactured by:Evers Agro B.V. based inKL Almelo, NETHERLANDS
The Evers stubble cultivator is a versatile and solid machine for effective stubble cultivation. The wing point chisels allow stubble to be loosened and mixed with the soil quickly and to a depth of 10 to 20 centimetres along the entire working width. This stubble cultivator is ...
Manufactured by:Kverneland Group based inKlepp Stasjon, NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® ...
Manufactured by:AGRO-MASZ based inMasłowice, POLAND
Stubble cultivators PLUS 2.1m, 2.6m and ...
Manufactured by:Solano Horizonte S.L. based inCorvera (Murcia), SPAIN
Frame in square tube of structural steel 100x100x8 mm. 40×40 arms mm with two mechanical spring safety system and nylon rings. Working depth: 30-35 cm. Categorie II & III hitching. Two-point share “TWIST” + ...
Manufactured by:AGRO-MASZ based inMasłowice, POLAND
Stubble cultivators 2.1m, 2.6m and 3.0m (non-stop ...
Manufactured by:EXPOM sp. z o.o. based inKrośniewice, POLAND
GROM stubble cultivator is designed for the treatment of flat surface soil layers, immediately after the harvest – causes faster germination of crop seed and weed residues, enables rapid decay of crop residues and retains moisture in the soil. The remains of grains and weed seeds germinate best when the soil is cultivated quite shallow ...
Manufactured by:Kverneland Group based inKlepp Stasjon, NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd ...
Manufactured by:AGRI FARM Machinery GesmbH based inMichelndorf, AUSTRIA
The stubble cultivator is a universal implement for fast tillage with little wear and low costs. It is used for the stubble breaking, tilling of green manure, for weed control, incorporating of slurry, as well as for the seedbed preparation. ...
Manufactured by:KUHN S.A. based inSaverne CEDEX, FRANCE
Stubble cultivator with independent discs, the OPTIMER+ is an ideal tool for shallow stubble cultivation at high speed. It facilitates forced emergence of weeds and volunteer seeds, decomposition of organic matter and allows maintaining maximum soil humidity. ...
Manufactured by:Religieux-Frères based inVigneux-Hocquet, FRANCE
The LIBORTO C is a recovery and stubble cultivator which has a robust chassis accepting working depths of up to 25 cm on all types of ...
Manufactured by:PÖTTINGER Landtechnik GmbH based inGrieskirchen, AUSTRIA
Three-gang mounted stubble cultivators - working width 3 to 5 ...
Manufactured by:SKY Agriculture based inCHATEAUBOURG, FRANCE
This agricultural stubble cultivator is perfectly suited to a small seed hopper. In addition, it comes pre-equipped with a support for a distribution head for sowing plant ...