Subsoiler Equipment In Europe
-
Manufactured by Pastò Elia & C. S.n.c.based in ITALY
Subsoiler available from 1 tooth, an operating depth of 85 cm and perfect for machines with a power take-off between 110 and 240 ...
-
Manufactured by Ciancaglini S.n.c.based in ITALY
Tubular frame to which are applied by means of bolted brackets, anchors, with shear bolts and wing walls adjustable height, ideal for the working surface. ...
-
Manufactured by D W Tomlinbased in UNITED KINGDOM
Optional extras: wing kits; discs c/w fittings; depth ...
-
Manufactured by ERMO S.p.A.based in ITALY
ERMO subsoilers are particularly suitable for heavy duty and at-depth working. The frame, built using high-resistance steels, is equipped with Hardox 400 tines, with a specific design which allows for a progressive penetration with low power absorption. The addition of special coulters on the tines allows for increased soil turning ...
-
Manufactured by Badalini Srlbased in ITALY
The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional energy conservation, and the ploughing coat can be broken. This machine, in fact, is manufactured with ...
-
Manufactured by Agrofer srlbased in ITALY
The Subsoiler D.A.R. Agrofer is characterized by innovative tecnologies and solutions of strength and operative versatility, qualities which make it very different from other similar machines already present on the market. With these technologies the Ridger Agrofer is ideal for Row working in vineyards, orchards, olive groves and other ...
-
Manufactured by Pastò Elia & C. S.n.c.based in ITALY
Drenater DRP-M1 Subsoiler available from 1 tooth, an operating depth of 75 cm and perfect for machines with a power take-off between 80 and 120 ...
-
Distributed by Quivogne UK Ltdbased in UNITED KINGDOM
The S80 ensures an efficient drainage ! This subsoiler has been engineered with a straight tine of thickness 30mm, a share in high-strength steel and a draining ball Ø100mm. This design enables an efficient drainage and its robust frame gives a foolproof ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
Ratoon subsoiler is based on 2 tine rows (2 to 8 tines), with a row distance of 75 cm and a tine height of 72 cm. Ratoon is equipped with either springbolts or hydraulic stone protection ...
-
Manufactured by Coorepabased in SPAIN
The rehearsals are the guarantee of effectiveness and quality in our products. The subsoilers Coorepa has been specially designed to work the land in depth.It penetrates in the floor with easiness, because the form of its arms allows that the tractor needs less power to carry out the work. They will also get with it a saving of ...
-
Manufactured by Dondi S.p.A.based in ITALY
This machine is particularly suited to replace plowing, since it can handle work at depths of up to 50/60 cm, with a working width that makes the use of subsoilers one of the most cost-effective systems available today. The special 45-degree inclination of the anchor makes the DONDI subsoiler efficient for rapid soil penetration and ...
-
Manufactured by Evers Agro B.V.based in NETHERLANDS
Deeper soil conditioning. Frame clearance of 93 cm. For tractors of 80 till 225 HP. Standard category 3L three point linkage. 3 Types of tinken (St, K und Kg - thickness 30mm). Of 1 till 5 tines with different tine spacings. Available with chiselpoints of 8, 20 and 35 ...
-
Manufactured by Faza Srlbased in ITALY
Low subsoiler (vineyard and orchard) c/w shear bolt with central shank. ...
-
Manufactured by Carrebased in FRANCE
DECOMPAK is used for decompacting any type of soil, under the plough pan up to 40 cm, with a clearance under the frame of 800 mm. POLYLAB is used for "pseudo-plough" decompacting with a clearance under the frame of 800 mm. There are 3, 5, 7 and 9-tine ...
-
Manufactured by Ciancaglini S.n.c.based in ITALY
It allows for aeration and clearing of land to large depth, thus facilitating the penetration of water. The machine is complete with ball diam. cm. 10, which allows you to drill a drainage channel that remains over time. The anchor is secured to the frame by a bolt of security, which in case of a collision enable him to disengage and rotate backwards. At the top of 'yet there are 3 holes that ...
-
Manufactured by Dante Macchinebased in ITALY
MAXI subsoilers can have 5, 7 or 9 tines, for tractors whose power is between 150 and 400 HP; they reach a 65 cm working depth. The anchor shape has a progressive penetration angle that help in lifting the soil and avoid waisting energies. Furthermore it creates clods, which help cultivation processes carried out after seeding, as soil is ...
-
Manufactured by Mecanica Ceahlau S.Abased in ROMANIA
Subsoilers represent the best tillage solution after repeated plowing, breaking the formed crust and making a depth loosening, which allows water to easily penetrate to the plant roots. Can successfully replace the plowing operation for achieving a lower fuel ...
-
Distributed by Dunns Ploughs & Plough Partsbased in UNITED KINGDOM
3 Legs. Shearbolt. Shearbolt protection. Quick fit points and shin. Adjustable track width. Adjustable leg height. Twin depth wheels. ...
-
Manufactured by Alpego S.p.a.based in ITALY
Subsoiler that can be combined with all rotating harrows or tillers fitted with a 3 point ...
-
Manufactured by Faza Srlbased in ITALY
Light type subsoiler (vineyard and orchard) c/w share bolt with cental shank. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you