Refine by
Subsoiling Equipment & Supplies
248 equipment items found
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Subsoilers Musca (working depth to 45 cm). Subsoilers Musca are intended only for deep soil cultivation without compromising its top layer. They loosen and aerate the soil up to 45 cm of depth. Subsoiling breaks the "plow-shaped sole" thereby restoring normal water and air conditions in the soil. ...
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Subsoilers Mensa (working depth to 65 cm). Subsoilers Mensa are intended only for deep soil cultivation without compromising its top layer. They loosen and aerate the soil up to 65 cm of depth. Subsoiling breaks the "plow-shaped sole" thereby restoring normal water and air conditions in the soil. ...
Manufactured by:Pastò Elia & C. S.n.c. based inBagnoli di Sopra (PD), ITALY
Drenater DRP-M1 Subsoiler available from 1 tooth, an operating depth of 75 cm and perfect for machines with a power take-off between 80 and 120 ...
Manufactured by:Pastò Elia & C. S.n.c. based inBagnoli di Sopra (PD), ITALY
Drenater DRP-P1 Subsoiler available from 1 tooth, an operating depth of 85 cm and perfect for machines with a power take-off between 110 and 240 ...
Manufactured by:D W Tomlin based inBoston, UNITED KINGDOM
Optional extras: wing kits; discs c/w fittings; depth ...
Manufactured by:JCBL Agri India based inMohali, INDIA
Length(mm) approx.:510, 550, 830, ...
Manufactured by:Akpil based inPilzno, POLAND
Subsoiler: [m]: 4,2, ...
Manufactured by:Akpil based inPilzno, POLAND
Subsoiler: [m] 1.8, 2.5, ...
Manufactured by:Steeno nv. based inAnzegem, BELGIUM
Simple robust depth, available in different working widths. The deep grounder is characterized by the anchored mounting of the teeth. Height under the beam: 80cm. Fixed points of need. The option package includes support rollers or support wheels, etc... Available from 1 to 8 ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 5" x 7" x ½" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 ¼" wide shanks are available with either 26" or 29" clearances between the ...
Manufactured by:Ciancaglini S.n.c. based inScerni (CH), ITALY
Tubular frame to which are applied by means of bolted brackets, anchors, with shear bolts and wing walls adjustable height, ideal for the working surface. ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frames: All frames are constructed with 6" x 10" x 1/2" structural steel rectangular tubing and are angled to provide maximum soil action with a minimum of draft load. Shanks: Specially curved shanks are mounted to the rear of the frame to maximize ripping depth and assist in alleviating trash build up. The 1 1/2" wide shanks are available with either 33" or 37" clearances between the bottom of ...
Manufactured by:HE-VA ApS based inNykøbing Mors , DENMARK
Combi-Tiller PTO has a strong frame construction and is delivered with 200 mm wing shares and the distance between the tines is fully adjustable. ...
Manufactured by:Gascon International based inHUESCA, SPAIN
ASTREA: Subsoiler Non-stop from 3 to 11 shanks. It has got a very heavy strong structure which can reach the best performance in every soil even in combination with high power ...
Manufactured by:Coorepa based inTIERZ, SPAIN
The rehearsals are the guarantee of effectiveness and quality in our products. The subsoilers Coorepa has been specially designed to work the land in depth.It penetrates in the floor with easiness, because the form of its arms allows that the tractor needs less power to carry out the work. They will also get with it a saving of ...
Manufactured by:Dave Koenig Enterprises, Inc. based inMesquite, NEW MEXICO (USA)
Frame:: All models are made with extra heavy duty frames constructed of 6 x 10 x ½ inch structural steel tubing. Each model is angled for maximum soil action with a minimum draft load. Hitch: The hitch is made of 6 x 6 x ½" steel tubing. Shanks: The shanks are of a special curved design mounted on the rear of the frame to give maximum depth and aide in alleviating trash build ...
Manufactured by:Dondi S.p.A. based inOspedalicchio di Bastia Umbra, ITALY
This machine is particularly suited to replace plowing, since it can handle work at depths of up to 50/60 cm, with a working width that makes the use of subsoilers one of the most cost-effective systems available today. The special 45-degree inclination of the anchor makes the DONDI subsoiler efficient for rapid soil penetration and cost-effective because it ...
Manufactured by:Ciancaglini S.n.c. based inScerni (CH), ITALY
It allows for aeration and clearing of land to large depth, thus facilitating the penetration of water. The machine is complete with ball diam. cm. 10, which allows you to drill a drainage channel that remains over time. The anchor is secured to the frame by a bolt of security, which in case of a collision enable him to disengage and rotate backwards. At the top of 'yet there are 3 holes that ...
Manufactured by:P.P.H. Mandam Sp. z o.o based inGliwice, POLAND
These subsoilers are designed for deep soil opening without opening its layer. They enable better moistening and and drainage in the surface layer of the soil. Available roller (MGW) provides better working depth control, while optional moles, improve field ...
Manufactured by:ERMO S.p.A. based inCasalbuttano, ITALY
ERMO subsoilers are particularly suitable for heavy duty and at-depth working. The frame, built using high-resistance steels, is equipped with Hardox 400 tines, with a specific design which allows for a progressive penetration with low power absorption. The addition of special coulters on the tines allows for increased soil turning over and aeration. Upon request, the ...