Only show results available in Virginia? Ok

sunflower header equipment

  • Sunflow - Model 500 - Sunflower Header

    The Sunflow 500 header has been manufactured to harvest sunflowers in small-sized plots both in flat areas (where performance is maximised) and hilly areas featuring high slopes, plants, and difficult land access or passages.

    By F.lli Zaffrani S.r.l. based in Corridonia (MC), ITALY. from Sunflower Header Product line

  • Sunflow - Model 550 - Sunflower Header

    The Sunflow 550 header has been manufactured to harvest sunflowers in medium/small-sized plots both in flat areas (where performance is maximised) and hilly areas featuring high slopes, plants, and difficult land access or passages. .

    By F.lli Zaffrani S.r.l. based in Corridonia (MC), ITALY. from Sunflower Header Product line

  • Sunflow - Model 600 - Sunflower Header

    The Sunflow 600 header has been manufactured to harvest sunflowers in medium-sized plots both in flat areas (where performance is maximised) and hilly areas featuring high-medium slopes, plants, and difficult land access or passages.

    By F.lli Zaffrani S.r.l. based in Corridonia (MC), ITALY. from Sunflower Header Product line

  • Dominoni - Model G900-GL900 - Sunflower Headers

    The building simple, strong and light of Dominoni sunflower headers guarantees a perfect and unchanged work overtime with minimal maintenance. Collecting units are easily set to the strong frame, they have sealed boxes and just one collecting chain. The cutting of sunflower plant is made throughout 4 rotating blades, easily replaced, allowing high ...

    By Dominoni s.n.c based in Camisano (CR), ITALY.

  • Solero - Sunflower Header

    The special sunflower header for harvesting with high capacity and minimal losses.

    By Zürn Harvesting GmbH & Co. KG based in Schöntal-Westernhausen, GERMANY. from Sunflower Header Product line

  • Tianren - Sunflower Header

    Main AdvantageAdopt patented small tilt angle technique: can harvest low plant, the lowest harvesting height is 350mm350mm row spacing, fully row independent, wide adaptabilityAdopt double layer feeding reel bat design: snap the stalks quickly and have less residue. Reduce the load of threshing drum, increase select efficiency and have better ...

    By Tianren Agricultural Equipment based in Shijiazhuang City, CHINA.

  • Sunflower Headers

    Extend your grain header life with the Stark sunflower header. Purposely designed for harvesting sunflower even in severe conditions, including flat plants. Harvest only the head and crush the rest. Less stress to your combine. Height of Chopper is hydraulically adjustable. Leave a clean field in one go.

    By Starks Industries based in Les Rosiers, FRANCE.

  • Fantini - Model G03 - Rigid Sunflower Header

    Designed to minimize seed loss without sacrificing speed, the Fantini G03 is tailor-made for an unprecedented harvest experience. Specially designed row unit covers and a central feeding auger retain seeds and maximize crop flow. Available in models from 4 to 18 rows, the Fantini G03 easily adapts to any combine. Simple, effective features require ...

    By Fantini North America LLC based in Le Center, MINNESOTA (USA). from Rigid Sunflower Header Product line

  • Sunflower Header Extension

    The sunflower header extension is the cost-effective solution for sunflower harvesting. Due to the one piece design of the header extension your standard cutting unit is converted in very short time. The sunflower header extension is available for Claas, John Deere and New Holland combines.

    By Zürn Harvesting GmbH & Co. KG based in Schöntal-Westernhausen, GERMANY. from Sunflower Header Extension Product line

  • Fantini - Model GP - Pan Style Sunflower Header

    Featuring a simple, robust design, the Fantini GP is unlike conventional headers. It is completely row independent and runs smoothly in any direction, even in adverse field conditions. During operation, the sunflower is guided from the divider points to the knives before the rotor catches the head. Once a stalk is cut the rotor moves the flower to ...

    By Fantini North America LLC based in Le Center, MINNESOTA (USA). from Pan Style Sunflower Header Product line

  • Model TI and TI-RP1 - Fixed and Foldable Sunflower Headers

    This header can be used also for sesame and sorghum and can operate with all combines makes and models. The header can be completed with one or two lateral conical augers hydraulically driven by an independent system.

    By Tecnomais Srl based in Ceresara (Mantova)., ITALY.

  • Fantini - Model G03 Series - Rigid Sunflower Harvesting Header

    The Sunflower Header G03 has been designed to minimize seed loss mantaining the speed through harvest. The specially designed G03 row unit covers and the central feeding auger retain the seeds, maximize the crop flow and offer an exeptional harvest experience. The G03 Rigid Sunflower Harvesting Header is easily adapted to any combine, with row ...

    By Fantini S.r.l. based in Medole (Mantova), ITALY.

  • Model GB - Header with Trays for Sunflower

    This header can be adapted to any type of harvester. Available in multiple lenghts from 5 mts in increments of 0.5 m, although you can make any measure on request. Hydraulic reel raising and lowering it from the combine. Widereinforced special trays to minimize crop losses. Adjusting system to the combine interchangeable and adjustable to change ...

    By Moresil, S.L based in Posadas, SPAIN. from Header with Trays for Sunflower Product line

  • Model G-4570 - Header with Chains for Sunflower

    The Moresil sunflower heads (4 to 12 rows) leave the factory adapted to the make and model of the combine harvester requested. In each case they are equipped with the elements necessary to achieve optimum performance. The width between rows varies between 500 m/m and 800 m/m.

    By Moresil, S.L based in Posadas, SPAIN. from Header with Chains for Sunflower Product line

  • Sunmaster - Header

    Excellent choice for farmers raising no till corn. The Sunmaster cuts up the trash improving conditions for spring planting and weed control. Corn stover can be baled for livestock feed or bedding. Cutter head height (under gathering chain) is approximately 11.25' from the ground when the header is on the ground. The top height of the catch pan is ...

    By Sheyenne Tooling & Manufacturing based in Cooperstown, NORTH DAKOTA (USA). from Header Product line

  • Sunflower Pans

    These revolutionary pans bolt directly on to you existing guards. This allows you to use your existing header to harvest sunflowers. Each pan is 9“ wide and weighs approximately 9 lbs. Split pans are available for end placement on your header.

    By Harvest Services a Division of Ralph McKay Industries based in Craik, SASKATCHEWAN (CANADA).

  • Stacsol - Sunflower Head

    The header CRESSONI serie STACSOL has been developped to meet requirement of good and quick sunflower harvest with low wastes of product at a very reduced price. The cogged-roller under header pull the straw downward and help the cut of the sunflower head, it avoid that straw has pulled up from the ground and enter into the combine. The big screw ...

    By F.lli CRESSONI s.p.a. based in Volta Mantovana (Mantova), ITALY. from Sunflower Head Product line

  • Model SG3 - Sunflower Head

    Low profile for perfect harvesting, even in down crop conditions.  Adjustable row distance from 45 cm (17.7“) to 75 cm (30”). The header can be mounted to any combine brand or model just by replacing the attachment. Concave dividers allow seed harvesting.

    By F.lli CRESSONI s.p.a. based in Volta Mantovana (Mantova), ITALY. from Sunflower Head Product line

  • OptiTrans - Header Transporter

    OptiTrans header transporter is suitable for the road transportation of each adapter types manufactured by the OPTIGÉP Ltd., as well as most of the harvesting adapters (sunflower, corn, etc.). It may be towed with the operating combine or an agricultural tractor. The towing speed may not exceed 15 km/h. The adapter should be loaded to and ...

    By Optigép Machine Manufacturing and Trading Ltd based in Békés, HUNGARY. from Header Transporter Product line

  • Champion - Rotary Headers

    KEMPER rotary crop headers offer uncompromising clear cut across the full working width and the safe crop guidance means that all plants are only cut once. There will be no double cut. This proven technology for over more than 20 years allows the universal use e.g. in broadcast sown crops, dual rows and rows with different widths with different ...

    By Sunova Implement Ltd. based in Lakeside, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you