Refine by
Surface Irrigation Equipment & Supplies
61 equipment items found
Manufactured by:Diamond Plastics Corporation based inGrand Island, NEBRASKA (USA)
Diamond Plastics manufactures 6”, 8”, 10”, and 12” WaterGate™ surface irrigation pipe in accordance with USDA, Natural Resources Conservation Service (NRCS) requirements of SCS 430 ...
Manufactured by:Greencrop based inBeeston, UNITED KINGDOM
Suitable for pumping water in mobile or semi-fixed irrigation systems. A centrifugal pump with horizontal axis, spiral delivery casing, and one or two impellers in series. Reliable and high quality, the 3-point linkage mounted pumps provide constant ...
Manufactured by:Rain-Tal Ltd. based inKibbutz Barkai, ISRAEL
The Turbo Sprinkler spreads water by a rotating a mini turbo swivel that ejects a jet to cover a larger wetting diameter. It generates a circular uniform droplet distribution over a range of throw diameters from 5 to12 meters, thus nicely completes our line of low volume spreaders. The products are available in a variety of flow rates, from 25 L/hr (6.5 GPH) to 300 L/hr (75 GPH). The flow rate is ...
Manufactured by:Rain-Tal Ltd. based inKibbutz Barkai, ISRAEL
This rotor propelled field sprinkler was historically known by the name "type 688 sprinkler" and "Windmill propeller ...
Manufactured by:Rain-Tal Ltd. based inKibbutz Barkai, ISRAEL
This tiny water spreader is one of Rain-Tal's leading products for low volume irrigation. It generates a circular uniform droplet distribution over a range of throw diameters from 2 to 6 meters. The product is available for a variety of flow rates, from 20 L/hr (5.3 GPH) to 160 L/hr (42.3 GPH). The nominal flow rate values are for a pressure of 2 bars (30PSI) and variations of the flow under ...
Manufactured by:Rain-Tal Ltd. based inKibbutz Barkai, ISRAEL
Dynamic Mister is a mini mist generator, the design of which is based on the same principles as the Vibro Spreader, i.e. with a center pin vibrating in the middle of the nozzle. It generates a uniform circular pattern, which in the upside down hanging mode (see right picture, including an anti-leak device and stabilizer weight) creates a "droplet free" mist cloud (picture below) The constant ...
Manufactured by:Allweiler-Farid Pumps based inSt., Shoubra El Mezallat, EGYPT
Low lift Pumps for Surface ...
Manufactured by:Faggiolati Pumps S.p.A. based inMacerata, ITALY
Multi-blade impeller for light water. Applications: rain water, surface ...
Manufactured by:TecaLink Pty Ltd based inVictoria, AUSTRALIA
Control flood / surface irrigation bay outlets using various methods: Timed control; Manual control at unit; Automatic via linked BaySensor and phone will be a future option. Control unit only, actuator not ...
Manufactured by:Fresno Valves & Castings, Inc. based inSelma, CALIFORNIA (USA)
The Series 2000 Clover Valve is an overflow type valve designed for use in surface irrigation to provide reliable shut off and regulation of flow from underground pipelines to irrigation furrows or checks. The series 2000 may also be used in conjunction with distributing pots in vineyard and orchard applications. ...
Manufactured by:ATLANTİS MÜHENDİSLİK,GOLF,PEYZAJ,TARIMSAL SULAMA LTD. ŞTİ. based inUmraniye, TURKEY
These systems that are being developed for the purpose of irrigating large agricultural areas in the most economic way and at high performance in many locations of the world have made themselves to be accepted also with the being irrigated of a lot of plants under different land and climatic conditions as the years pass. Center Pivot can operate at slopes that ...
Manufactured by:Masna Plastik A.S based inTurgutlu, TURKEY
Vertical and undulating terrains which cannot irrigated with the surface irrigation methods can irrigated with the Springer irrigation system without requiring any ...
by:Rubicon Water based inFort Collins, COLORADO (USA)
The BayDrive is a remotely operated farm canal gate actuator. The BayDrive is designed to make surface irrigation less labor-intensive and more flexible so you can improve yields and reduce water ...
Manufactured by:Karbir Plastik based inSelçuklu, TURKEY
It has the nozzles that can be dismantled by hand. Because of its design in minimum dimensions, it provides the easiness of usage and storage. The delayed breaker provides the feature of homogenous water distribution at the requested ...
Manufactured by:Karbir Plastik based inSelçuklu, TURKEY
This sprinkler produced without breaker completes the task of breaker with its special nozzle design. Thanks to this design, the water gains a special momentum while leaving from the nozzles and a homogenous distribution is ensured. It has independent manually-assembled nozzles in different ...
Manufactured by:Damla Plast based inSelçuklu, TURKEY
Drip Irrigation is the most important irrigation system which is boosting the agricultural production. The traditional surface irrigation methods can only be applied in the evened areas. Also, the water is required to be abundant and appropriate to the irrigation as ...
Manufactured by:Irritime based inKaratay, TURKEY
Manufactured with Irritime quality assurance, STAR-R provides a seamless irrigation experience even in the most challenging terrain ...
Manufactured by:Karbir Plastik based inSelçuklu, TURKEY
With its single grooved wing, it provides the opportunity to distribute the water more homogeneously. With its varied nozzle diameters, it provides different irrigation options according to the product and soil structure. With its nozzle patent design, the feature of different flow adjustment is ensured on a single ...
Manufactured by:Karbir Plastik based inSelçuklu, TURKEY
With its single grooved wing, it provides the opportunity to distribute the water more homogeneously. With its varied nozzle diameters, it provides different irrigation options according to the product and soil structure. With its nozzle patent design, the feature of different flow adjustment is ensured on a single ...
Manufactured by:Grupo Chamartin, S. A based inMadrid, SPAIN
Center Pivot Is a form of overhead sprinkler irrigation consisting of several segments of pipe on galvanized steel joined together and supported by trusses, mounted on wheeled towers with sprinklers positioned along its length. The machine moves in a circular pattern and is fed with water from the pivot point at the center of the circle. This system makes possible to ...