Only show results available in Virginia? Ok

tensiometer Equipment

  • Premium

    Standard Tensiometer

    The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be provided.

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from In Situ Soil Physical Research Product line

  • Model T8 - Tensiometer

    The T8 is characterised by maximum user comfort and was developed for long term monitoring projects.

    By UMS AG based in Munich, GERMANY. from Tensiometers Product line

  • Model TS1 - Self Refilling Tensiometer

    If your task is soil water monitoring you know the problem: water vaporizes and is lost. If soil gets dryer than about 85 kPa, no tensiometer is able to take measurements. Still, as only little water movements occur in extreme dry soil, losing readings is tolerable. Then, when the soil gets wet again, the Tensiometer could actually restart ...

    By UMS AG based in Munich, GERMANY. from Tensiometers Product line

  • Model K11 - Force Tensiometer

    Our Force Tensiometer – K11 is a precision and fully automatic instrument for the reliable measurement of surface tension and interfacial tension. With its high-quality components and simple operation, the K11 assists in the quality control and optimization of surfactant solutions and interfacial processes.

    By KRÜSS GmbH based in Hamburg, GERMANY. from Tensiometer Product line

  • Model K20 - Force Tensiometer

    Our Force Tensiometer – K20 is a robust, semi-automatic instrument for the precise measurement of surface tension and interfacial tension. Using the ring and plate method as the main tensiometric methods, it produces reliable measurements for the routine quality assurance of your surfactant solutions and interfacial processes. Our K20 ...

    By KRÜSS GmbH based in Hamburg, GERMANY. from Tensiometer Product line

  • Model K100 - Force Tensiometer

    The universal instrument for analyzing surfactants and solid surfaces. Our universal Force Tensiometer – K100 performs high-precision, automatic and reliable measurements of surface tension and interfacial tension, critical micelle concentration CMC and contact angle on solids, fibers and powders. With high-quality components and a uniquely ...

    By KRÜSS GmbH based in Hamburg, GERMANY. from Tensiometer Product line

  • Model T4 - Tensiometers

    The T4 precision Tensiometer - developed for outdoor monitoring projects. Only the ceramic cup is filled with water for highest accuracy and year-round operation. Optionally with external refilling: The model T4e with external refilling can be refilled or emptied without removing it from the soil.

    By UMS AG based in Munich, GERMANY. from Tensiometers Product line

  • Model T5 - Laboratory Tensiometer

    The T5 Tensiometer is specially made for punctual measurements, for example in soil columns, small lysimeters or pots. With an active surface of only 0,5 cm2 and a diameter of 5 mm the ceramic tip has all advantages of small dimensions: little soil disturbance, punctual pick-up and fast response. The special version T5x can achieve a measuring ...

    By UMS AG based in Munich, GERMANY. from Tensiometers Product line

  • Model BP100 - Bubble Pressure Tensiometer

    Our Bubble Pressure Tensiometer – BP100 measures dynamic surface tension with high accuracy. It reliably analyses the mobility of surfactants, thus enabling high-speed processes such as spraying, coating, printing and cleaning to be optimized.

    By KRÜSS GmbH based in Hamburg, GERMANY. from Tensiometer Product line

  • EXAMO - Model 600 F - Tensiometer

    Ideal for measurements directly on the construction site. Optionally with data recording to a USB stick for all measurements. Clamp separation 600 mm.

    By Leister Technologies LLC based in Itasca, ILLINOIS (USA). from Tensiometer Product line

  • EXAMO - Model 300 F - Tensiometer

    Ideal for measurements directly on the construction site. Optionally with data recording to a USB stick for all measurements. Clamp separation 300 mm.

    By Leister Technologies LLC based in Itasca, ILLINOIS (USA). from Tensiometer Product line

  • Model T2 S - Switch Tensiometer

    T2S Switch Tensiometers are used for control of electro-valves or whole irrigation controllers based on soil water potential, and are used for irrigation automation. Switch tensiometers manufactured by MMM can be used for direct control of electro-valves, or can be used at the sensor port of any irrigation controller. They can be used with all ...

    By MMM tech support GmbH & Co. KG based in Berlin, GERMANY. from Tensiometer Product line

  • Premium

    Multi-Functional Tensiometers

    This multi-functional set can be applied to execute different research with various types of tensiometers up to a depth of 90 cm. The standard tensiometer for example is used in irrigation areas for permanent placement. The Jet-fill tensiometer has an additional water reservoir in order to be able to continuously fill the tensiometer allowing it ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from In Situ Soil Physical Research Product line

  • IRROMETER - Model R - Tensiometers

    The IRROMETER Model “R” is the standard one-piece IRROMETER for general use with row, tree, and field crops. Includes reservoir, air free gauge chamber and hermetically sealed IRROMETER vacuum gauge with dual scale of centibars and kilopascals (0-100 cb [kpa] range)

    By D.N.M, AG Supply, Inc. based in Calabasas, CALIFORNIA (USA). from IRROMETER Sensors Product line

  • Model 46903 - Tensiometer

    Tensiometer , a tool that allows you to determine the soil moisture based on the loss of water content . Lengths available: 30 - 45 - 60 cm

    By T.R. Turoni srl based in Forlì, ITALY. from Field Meters Product line

  • Tensiometers

    Vacuum gauge with large 2ý easy-reading dial face is graduated from 0 to 100 centibars of soil suction. Hermetically-sealed, resilient, neoprene jacket protects against weather and shock. Neoprene O-ring stem seal permits dial gauge to be removed or oriented in convenient reading position with perfect vacuum seal assured, and thus provides ...

    By Forestry Suppliers, Inc. based in Jackson, MISSISSIPPI (USA). from Soil Test Instruments, Thermometers & Kits Product line

  • Tensiometers

    These modernized tensiometers, built by German company UMS, are THE most accurate way to measure soil matric potential. Thanks to precision engineering, meticulous construction, and fanatical attention to detail, they have terrific accuracy and a range that (with a skilled operator) can extend beyond -200 kPa.

    By Decagon Devices, Inc. based in Pullman, WASHINGTON (USA). from Water Potential Sensors Product line

  • IRROMETER - Model SR - Tensiometer

    The IRROMETER was first developed in 1951 to help growers improve irrigation efficiency. It provides the user with accurate information on soil moisture status regardless of soil type. The instrument measures in centibars (cb) or kilopascals (kPa) of soil water tension. This value represents the energy a plant’s root system used to draw ...

    By IRROMETER Company, Inc. based in Riverside, CALIFORNIA (USA). from Sensors - Irrometer Tensiometer Product line

  • IRROMETER - Model R - Tensiometer

    The IRROMETER Model 'R' is the standard one-piece IRROMETER for general use with row, tree, and field crops. Includes reservoir, air free gauge chamber and hermetically sealed IRROMETER vacuum gauge with dual scale of centibars and kilopascals (0-100 cb [kpa] range).

    By IRROMETER Company, Inc. based in Riverside, CALIFORNIA (USA). from Sensors - Irrometer Tensiometer Product line

  • DyneMaster - Model DY-500 - High Performance Surface Tensiomete

    The DyneMaster DY-500 and DY-700 are multi-use instruments capable beyond that of a simple surface and interfacial tensiometers. Measurements of powder contact angle (Washburn powder wettability), Wilhelmy dynamic contact angle, automatic determination of CMC, lamella, density, and sedimentation measurements can be achieved through optional ...

    By Kyowa Interface Science Co Ltd based in Niiza-City, JAPAN. from Surface Tensiometer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you