Tensiometer Equipment In Canada
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
Manufactured by Leister Technologies LLCbased in USA
Ideal for measurements directly on the construction site. Optionally with data recording to a USB stick for all measurements. Clamp separation 600 ...
-
Manufactured by Irrometer Company, Inc.based in USA
, creating vacuum measured by the gauge. This is a direct, physical measurement of the same tension plant roots experience, requiring no electronics, batteries, or calibrations to operate. IRROMETER tensiometers have been on the market since 1951 and are proven by decades of commercial usage and field research, trusted enough to serve as the ...
-
Manufactured by Irrometer Company, Inc.based in USA
Measuring soil moisture allows a grower to make informed irrigation scheduling decisions that will improve yields and quality while reducing water, fertilizer, labor, and energy costs. MLT IRROMETER’s are designed to operate in conditions where tensions above 30 cb (kPa) are not expected and compact size is needed such as containers or pots in greenhouse ...
-
Manufactured by Irrometer Company, Inc.based in USA
c ...
-
Manufactured by Leister Technologies LLCbased in USA
Ideal for measurements directly on the construction site. Optionally with data recording to a USB stick for all measurements. Clamp separation 300 ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
The AIC soil moisture Tensiometer has now been around for almost 40 years. The most affordable instrument of its class, AIC holds sway over the Indian market. ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
A ceramic soil water sampler, often referred to as a ceramic cup or tensiometer, is a device used to measure soil water tension or suction in agricultural, environmental, and research applications. It helps monitor the moisture content and water availability in the soil, which is essential for proper irrigation management and understanding ...
-
Manufactured by Irrometer Company, Inc.based in USA
on/off status, and rain gauge counts for an accurate record of the performance of your irrigation schedule. Either Watermark 200SS sensors or RSU-V equipped IRROMETER tensiometers can be used to collect soil moisture data. Information can be downloaded directly to a computer via on-board USB port with the included WaterGraph software, which ...
-
Manufactured by Felix Technology Inc.based in CANADA
Equitensiometer FT3505.20 measures matric soil water potential. This is defined as the amount of work that must be done per unit quantity of pure water in order to transport reversibly and isothermally an infinitesimal quantity of water; identical in composition to the soil water, from a pool at the elevation and the external gas pressure of the point under consideration, to the soil ...
-
Manufactured by Irrometer Company, Inc.based in USA
Real-Time Data on any Device. Our new IRROcloud solution is a simple, affordable, and reliable solution for automatically collecting sensor data and storing it in the cloud for quick access at any time. Using only four C batteries with a 2+ year life, the IC-10 Sensor Monitor reads up to 10 sensors and reports directly to IRROcloud without any need for additional gateways or devices. With no need ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. Some methods take several months just to complete a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you