tillage Equipment in Georgia (US)

  • Model 6900 Series - Rip Roller

    The 6900 Series Rip Roller is the ideal implement for breaking the hardpan all the way across the width of the implement, and leveling the surface in heavy crop residue conditions while leaving the surface with an undisturbed appearance.   Requires approximately 25-40 HP per shank depending on depth and soil conditions

    By Kelley Manufacturing Co. based in Tifton, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Model 6800 Series - Ripper Bedder

    The KMC 6800 Series Ripper Bedder allows for deep tillage under the row and forming uniform peaked beds for bedded row crops in one pass. The parallel linkage connection between the front ripper tool bar and the rearward bedder tool bar, and the pneumatic gauge wheels on the bedder tool bar, allow the disc gangs the flotation needed to form beds ...

    By Kelley Manufacturing Co. based in Tifton, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Coil-Tech - Model I-1200 - 1, 5` Blade Spacing Surface Tillage

    Designed for the finest surface tillage available, the I-1200 uses the Coil-Tech Coulter I, 1 1/4” independent blade mounting system to carry blades on the 5” spacing.  The I-1200 models average 40% more blades and 39% more weight per machine than the standard I-1100 that uses 7” blade spacing and a lighter frame.

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Secondary Tillage Product line

  • Model 9800 DRH - Disc Ripper Harrow

    The Salford 9800 Disc Ripper Harrow is designed to go deep and stay deep.  Where other disc rippers and tillage tools often ride up and over tough obstacles in the soil profile, the 9800's weight and 6'x8'main frame keep this machine at depth to break up compacted soil.  The individual blade mounts hold each blade on a compound angle ...

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Primary Tillage Product line

  • Rip/Strip - Model 6700 Series - Deep Tillage Equipment

    For many years the KMC Rip Strip has been the main stay in the Southeast for breaking the hard pan and preparing an in row seed zone for uniform seed planting and excellent soil to seed contact in a variety of tough conservation tillage conditions. Middles are left undisturbed, and row components are designed and positioned to run through tall ...

    By Kelley Manufacturing Co. based in Tifton, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Model 9700 CTS - Multi-Purpose Primary Tillage

    The 9700 CTS is designed to reduce equipment capital and operating costs by performing so many operations with this one machine. Salford's unique design allows you to use the CTS for top soil tillage, minimum tillage, deep tillage finishing or deep ripping, to reduce your capital costs and maintenance. The 9700 can be configured with chisel shanks ...

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Primary Tillage Product line

  • Bed Leveler

    The KMC Bed Leveler / Incorporator is designed to provide cost saving advantages by leveling beds, applying and incorporating chemicals, and preparing seedbeds in one trip.  Standard features include 7x7 Tool Bars with welded lower hitch, bolt-on hitch mast, and individual row units mounted to the tool bar by a heavy duty parallel ...

    By Kelley Manufacturing Co. based in Tifton, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Challenger - Seeding & Tillage

    In select North American locations, Challenger and White Planters® have joined together to offer seeding and tillage products. White Planters is a leader in row-crop seeding technology. From corn to sunflowers, cotton to peanuts, there's a White Planters model match to the job.  White Planters equipment can be used for conventional or ...

    By AGCO Corporation based in Duluth, GEORGIA (US) (USA). from Seeding & Tillage Product line

  • Model 9200 - In-Line Ripper

    Make hardpan problems history and improve drainage. At the core of every Salford product is a commitment to engineering, ergonomics and build quality. The In-Line Ripper is no exception with its double frame design for years of dependable performance. The Salford In-Line Ripper is engineered to correct compaction problems and improve aeration and ...

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Primary Tillage Product line

  • Model I-1500 - Strip Till Applicator

    The I-1500 Strip Till Applicator takes the best of strip till technology and spreads it out over a much deeper frame than conventional strip-till machines in order to prevent the tool from plugging with high volume residue.

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Secondary Tillage Product line

  • S-Tine and C-Shank - Model 450 - Cultivators

    Are standard features on Salford field cultivators.  Hydraulic self leveling frames, and fine adjust single point depth control are standard features.  Capped, all tubular steel frames add to the strength of the machine, and 4'x6' main beams, and 2.5' x 2.5' tine bars stand up to the toughest operating conditsion. Fewer hinge points ...

    By Salford Group, Inc. Office in Cornelia, GEORGIA (US) (USA). from Secondary Tillage Product line

  • Dirt Dog - Pull Disc Harrow

    Dirt Dog’s new Pull Disc Harrows, the DHP Series, are designed for pulverizing soil, seed bed preparation and general tillage. Solid built units available in widths of 8’, 10’ and 12’, the DHP line of disc harrows are ideally suited for use by small farmers, food plot managers, ranchers, construction crews and nursery ...

    By Dirt Dog Manufacturing based in Commerce, GEORGIA (US) (USA). from Disc Harrows & Tillage Equipment Product line

  • Case IH - Offset Disk Harrows

    Case IH Heavy-Offset 790 offset disk harrows perform a wide array of soil-conditioning tasks with tough, long-lasting components. Two models are available, providing a range of disk blade width and spacing options.

    By Case IH - a division of CNH Global Distributor in GEORGIA (US) (USA). from Tillage Product line

  • Bush Hog - Model APP48/60/66/85 - All Purpose Plows

    Bush Hog’s new line of All Purpose Plows help you tackle a wide range of ground breaking tasks. These field cultivators break up, cultivate, and aerate the ground in agricultural fields, food plots, gardens, or anywhere you need to get something growing. Spring loaded, auto-reset shanks allow you to go where other tools cannot… ...

    By Bush Hog Distributor in GEORGIA (US) (USA). from Tillage- Plows Product line

  • Challenger - Model 1000 Series - Disc Harrows

    The quality and efficiency of the Challenger 1000 Series has been proven over many years, and the company’s obsession with constant improvement means these disc harrows are ideally suited to today’s farming practices. 

    By Challenger - part of AGCO Netherlands B.V. Distributor in Lake City, GEORGIA (US) (USA). from Seeding & Tillage Product line

  • Challenger - Model 2500 Series - Chisel Plough

    Where soil compaction has become a problem, the 2500 series is the clear choice. Best used post-harvest, shattering the hard pan to depths up to 30cm, while opening up the soil surface can deliver significant benefits in terms improved water infiltration and nutrient management. The 2500 Series Chisel Plough is designed to shatter compaction down ...

    By Challenger - part of AGCO Netherlands B.V. Distributor in Lake City, GEORGIA (US) (USA). from Seeding & Tillage Product line

  • Double Basket Assembly

    The two ground driven rolling baskets will break up the clods and knock down esisting stalks to provide a smooth level surface. This is an excellent alternative to a conventional harrow. It eliminates leaving bunches or piles of stalks allowing for quicker decay

    By Besler Industries, Inc Distributor in Albany, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Model 5000 Series - Field Cultivators

    The 5730 range is the ideal tool and has been designed for secondary cultivations and final seedbed preparation. Soil conditioning at its best to ensure the optimum seedbed for planting. This range is suitable for 225 – 345 hp tractors. Heavyweight construction, unrivalled clearance and excellent flotation are three of the more obvious ...

    By Challenger - part of AGCO Netherlands B.V. Distributor in Lake City, GEORGIA (US) (USA). from Seeding & Tillage Product line

  • Model 2800 - Cotton Puller

    The Cotton Stalk Puller is ideal for the removal of Cotton Stalks. It can be adjusted to pull or cut the cotton stalk from below the surface of the ground. The rolling basket on the floating parallel linkage will level the seed bed and help incorporate the cover crop. This allows the farmer to minimum till with little ground disturbance in a one ...

    By Besler Industries, Inc Distributor in Albany, GEORGIA (US) (USA). from Tillage Equipment Product line

  • Model 2000 - Root Slicer

    The Root Slicer is ideal for pre-plant seed bed preparation in a variety of crops such as corn, milo and sunflowers. It can be adjusted to cut the root crown from the ground allowing minimum till farming with little ground disturbance. Low tractor horsepower, and high-speed operation allows for quick and efficient ground preparation. Recommend ...

    By Besler Industries, Inc Distributor in Albany, GEORGIA (US) (USA). from Tillage Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you