Tillage Equipment In Kansas
-
Manufactured by Great Plains Agbased in USA
In the fall, vertical tillage eliminates the soil’s density layers, leaving it ready for a one-pass tool before spring planting. Turbo-Chisel is engineered to size and incorporate residue into the top 4-5" of soil, while leaving the surface level enough for a single-pass tool in the spring. The Turbo-Chisel is available in 14 ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
The Fallow-King is specially built for the wide range of soil conditions found on the Great Plains. It performs both primary and secondary tillage activities. The entire Fallow-King series features two rows of shanks and frames that flex every 7' to hug the terrain on flat or rolling ground, even over terraces. You can run shallow without the ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
Eliminate Soil Compaction While Managing Crop Residue. Soil compaction is a thief; robbing you of yields by denying your crop of nutrients and moisture. The 4200 Series from Sunflower is the answer. This coulter chisel can completely fracture hardpans and eliminate soil compaction to a depth of 12“. Equip the heavy chisel standards with twisted points and together with the large diameter ...
-
Manufactured by Great Plains Agbased in USA
True vertical tillage has become the go-to method for yield-boosting seedbed preparation. Turbo-Max is the ideal vertical tillage solution for min-tillers who want to size and anchor residue without aggressively working the ground in the fall. It vertically cuts residue and fractures the soil to create a smooth seedbed for uniform seed ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
The 4213 from Sunflower is the answer for removing soil compaction while opening up the surface for improved water intake and reduced erosion. This coulter chisel can completely fracture hardpans and eliminate soil compaction to a depth of 12' - 14' that a wider spaced shank arrangement would miss. With coulters spaced every 7 1/2' and shanks on 15' centers, not much gets by this complete ...
-
Manufactured by Great Plains Agbased in USA
In today’s farming economy, it’s all about getting more done in a day. Recognized as one of the most productive tillage tools in the industry, the Great Plains Disc-O-Vator can disk, cultivate, harrow, and incorporate herbicide—all in a single pass. Known for its robust strength, the Disc-O-Vator’s rugged ...
-
Manufactured by Great Plains Manufacturing, Inc.based in USA
Great Plains Simba offers a wide range of innovative mounted tillage equipment including disc and tine cultivators, subsoilers, presses and rollers. Designed and manufactured around proven agronomic principles, our products provide effective solutions that meet your needs for seedbed preparation, soil loosening and consolidation. ...
-
Manufactured by Haven Steel Products, Inc.based in USA
Provides a spring preload on the axle bolt, spreading the load from the axle nut to the disc and keeping constant pressure on the discs in the gang ...
-
Manufactured by Haven Steel Products, Inc.based in USA
Straight and ...
-
Manufactured by Great Plains Manufacturing, Inc.based in USA
The Great Plains Inline Sub-Soiler is another step in the evolution of our vertical tillage family designed to eliminate yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
The 4412 is an exceptional combo primary tillage tool requiring less horsepower per shank than many competitors. The H.D. Auto Reset shanks of the 4412 are positioned between the front and rear disc gangs. The 4412’s “Disc-Ripper-Disc” design reduces the power demands by twenty percent as compared to competitor’s ...
-
Manufactured by Rhino - a registered trademark of the Alamo Group Inc.based in USA
Introducing our new & improved vertical tillage tool that still prepares the seedbed, breaks through surface compaction, meets residue management requirements, and cuts through tough BT stalks with its SoilRazor disc blades: EarthMaster ...
-
Manufactured by KUHN S.A.based in FRANCE
The DOMINATOR Primary Tillage System is changing fall tillage. This exciting new concept eliminates stalk shredding and extra seed bed preparation trips. By managing residue in the fall and leaving a more level fall seed bed condition, the DOMINATOR sets the stage for fast efficient spring seedbed trips and maximum ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
The Sunflower 4511 and 4530 are primary tillage tools built around the performance proven staggered, overlapping front and staggered rear disc gang design. This design, long used in the tandem disc harrows, is field proven to uniformly cut the working width of the tool and leave the field surface smooth and ridge free. They are medium ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
Soil compaction is a thief; robbing you of yields by denying your crop of nutrients and moisture. The 4200 Series from Sunflower is the answer. This coulter chisel can completely fracture hardpans and eliminate soil compaction to a depth of 12“. Equip the heavy chisel standards with twisted points and together with the large diameter coulters spaced every 7 1/2" the crop residue is sized ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
The Model 1234 Disc Harrow is a medium weight disc that capably handles primary through finish discing operations. An all welded frame features even weight distribution for uniform penetration, and the three flexible sections assure that rough, rolling and terraced ground will be tilled evenly and smoothly. Large tires provide excellent flotation, unmatched depth control and the base for level ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
With working widths up to 50 feet, Sunflower 1550 Series Five Section Disc Harrows can cover more than 30 acres per hour and still provide unmatched flexibility over uneven terrain. Built with the strength to handle highhorsepower tractors it also boasts over 650 pounds per foot or 230 plus pounds per blade to cut through tough crop residue and packed soil. When time is short and the fields are ...
-
Manufactured by Salford Barron & Brothers International (BBI)based in USA
The 9700 CTS is designed to reduce equipment capital and operating costs by performing so many operations with this one machine. Salford's unique design allows you to use the CTS for top soil tillage, minimum tillage, deep tillage finishing or deep ripping, to reduce your capital costs and maintenance. The 9700 can be configured with chisel ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
increase your efficiency with each tillage pass. See why the Sunflower 1300 Series is the best flexible-offset disc on the ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
Built for today's large acreage discing, the Sunflower 1544 Disc is available in working widths of 42' and 45' and includes single-point front-mounted depth controls and improved clearance, both in the field and on the road. Six pairs of walking tandems provide excellent weight distribution and flotation. The lift system pivots on maintenance-free UHMW plastic sleeves that totally eliminate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you