Tillage Equipment Near Colorado
-
Manufactured by John Deerebased in USA
The new 5100E features a John Deere PowerTech Diesel Engine - pumping out a robust, 100 engine horsepower, it’ll handle just about anything you can throw at it. From putting up hay to light tillage work and everything in between, the new 5E Series puts the “utility” back in to utility tractor. Plus, with a host of ...
-
Manufactured by Land Pride - Great Plains Manufacturingbased in USA
The 3P500 5' 3-Point Min-Till drill is designed to get into places big drills simply can't; like wooded areas, orchards, and vineyards. These excel when seeding into fully prepared and minimum tillage plots. Add the optional small seeds box and plant two different seeds at the same time. The 3P500 is ground driven and features 4-speed ...
-
Manufactured by John Deerebased in USA
Disks from primary tillage applications in standing stalks to seedbed prep, the 670 Offset Disks are up to the task. A one-piece welded steel frame and adjustable front and rear gang angles deliver the right results no matter the soil ...
-
Manufactured by John Deerebased in USA
One trip for secondary tillage and seeding? It’s possible with the 730LL (Level Lift) Air-Disk Drill. From soybeans to small grains and grasses, you can prepare the seedbed while seeding quickly and accurately on 6- or 7.5-inch row ...
-
Manufactured by Land Pride - Great Plains Manufacturingbased in USA
Similar to the 3P500, the 3P600 is a 3-Point Min-Till drill. This 6' unit is designed to get into smaller spaces like wooded areas, orchards, or vineyards. It excels when seeding into fully prepared and minimum tillage plots. End users can add the optional small seeds box and plant two different seeds simultaneously. Like the 3P500, the ...
-
Manufactured by Land Pride - Great Plains Manufacturingbased in USA
Similar to the 3P500, the 3P600 is a 3-Point Min-Till drill. This 6' unit is designed to get into smaller spaces like wooded areas, orchards, or vineyards. It excels when seeding into fully prepared and minimum tillage plots. End users can add the optional small seeds box and plant two different seeds simultaneously. Like the 3P500, the ...
-
Manufactured by Yanmar America Corporation, A Part of YANMARbased in USA
cousins, the SA221 can do serious work with 3-point hitch mounted tillage tools, a front end loader, a powerful hydraulic backhoe and many more tractor ...
-
Manufactured by APV Technische Produkte GmbHbased in AUSTRIA
The ES 100 M2 Special is ideal for spreading rotational and permanent fallow land, intercrops, grass seed, nurse crops, slug pellets and similar granulates. Through its control point adjustment you will reach a more exact scatter distribution. The seed rate is via the slider according to agronomical goals adjustable, which closes automatically when raising by using a tractor linkage ...
-
Manufactured by APV Technische Produkte GmbHbased in AUSTRIA
Thanks to its design and functionality, the ZS 200 M4 is a competitively-priced and exact alternative for cultivating intercrops (greening), grass reseeding, spreading slug pellets (up to 30 m), nurse crops and sowing on fallow land. This is because it can perform sowing and tilling operations in a single ...
-
Manufactured by APV Technische Produkte GmbHbased in AUSTRIA
The PS 800 M1 is the fully professional-grade implement for sowing intercrops and tilling the ground in a single process. With an 800 l tank volume, the pneumatic sowing implement has enough capacity, and also saves you money on tillage, because the pneumatic sowing implement can be fitted to a cultivator. The PS 800 M1 is able to sow oilseed ...
-
Manufactured by Hiniker Companybased in USA
The practice of strip-tillage continues to gain acceptance with row crop farmers across the country. With the Hiniker strip-till solution you will realize the economic, agronomic and environmental benefits of this tilling ...
-
Manufactured by T. G. Schmeiser Co., Incbased in USA
The design of the Culti-Plow leaves stubble growth on top and reduces evaporation. Deep soil is thoroughly loosened all the way across the working width, not just slicing straight lines. ...
-
Manufactured by Palmor Products Incbased in USA
The Model 580 Trac Vac is a powerful lawn vacuum offered by Palmor Products to do an efficient job of picking up leaves, grass clippings and light litter necessary to give your lawn a well-cared for ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
3/4” (19 mm) tip with extra long carbide on the nose and sides for highly abrasive conditions. The same as 200-TIP-0802 but with the addition of the side carbide ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
Fits all Bourgault and Ezee‑On field cultivators, air seeders and air drills. 1-3/4” (45 mm) center to center. 1/2” (12 mm) hex head ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
This opener is designed for a better fit on the Bourgault Shank. The larger tip provides extra long wear while reducing wear on the ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
This holder has 1-3/4″ (45 mm) bolt hole spacing. The bolt hole section is curved to fit all 47° shanks except the Bourgault and ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
Liquid Phosphorus is delivered onto the seed bed, below the seed. The seed is delivered through the precision funnel opening. Front delivery provides precise seed delivery and reduces plugging with better soil flow. Extra hard surfacing on critical wear areas increases the life of the ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
This spreader attachment will distribute the seed evenly in a 3″ to 4″ (76 mm to 100 mm) band. Seed spread may vary depending on sweep size, soil type and fan ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
This holder has 2-1/4″ (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH755 shank used on the Morris Magnum III and the Morris Concept ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you