Only show results in Texas? Ok

tillage coulter equipment

  • Vertical Tillage Coulter

    Exclusive offset design - Covers acres quickly - Superior residue management - Helps break down soil compaction layer - Offset discs allow for easier penetration and help prevent slabbing. 18' discs 7' apart available in 8 wave or 13 wave - Converts almost any tillage tool or heavy cultivator with C-shanks and a  minimum of 440 lb trips ...

    By GroundUp Ag based in Mayville, NORTH DAKOTA (USA).

  • Tillage

    North American and European Plow coulters. Chisel plow points and sweeps. Cultivator points and sweeps. Disc blades and planter blades. Disc bearings and housings. Harrow tines. 'S' tines and clamps. Rotary tiller blades

    By Canadian Farm Supply based in St. Marys, ONTARIO (CANADA).

  • Bellota - Fluted Coulters - Tillage and Cut

    Characteristics: Boron steel. Integral hardening, guaranteeing a 50 Hrc hardness.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Fluted Coulters - Tillage and Cut Product line

  • Turbo - Coulter Blade

    The patented Turbo blade is the most recognizable coulter blade in the market. It was the first true vertical tillage and is sold exclusively to Great Plains Manufacturing.

    By Osmundson Mfg. Co. based in Perry, INDIANA (USA). from Coulter Blade Product line

  • GenTill - Coulter Attachment

    Genesis Tillage is now manufacturing a Coulter Attachment for your aerator.  The Coulter Attachment comes in various sizes to fit your needs, and provides you the options to pick the coulter blade you prefer (wavy, straight, etc.).

    By Genesis Tillage, Inc. based in Hope, INDIANA (USA). from Coulter Attachment Product line

  • Gates - Model Series II 12000 - Coulter Disk

    The Gates Coulter Disk is a vertical tillage tool that gives you maximum versatility by also performing as a conventional disk harrow. It performs in the fall or spring, and in conventional tillage or no-till operations. That’s because its front and rear disk gangs can be independently adjusted from 0 to 15 degrees. Run them straight for ...

    By Gates Manufacturing based in Lansford, NORTH DAKOTA (USA).

  • Fertilizer Coulters

    Symmetric components: you no longer have to keep separate parts for left and right coulters! Only thefertilizer boot and the mounting plate are LH or RH. Easy disc replacement: simply remove the depth pin a drop the gauge wheel for full access to the disc! Can be installed on most brands of planters and applicators. Adapted to all tillage systems: ...

    By Industrie Aulari Inc. based in Saint-Barnabé-Sud, QUEBEC (CANADA). from Fertilizer Coulters Product line

  • Landoll - Model 2100 Series - Coulter Chisel

    The coulter chisel concept has been used for decades as an alternative primary tillage practice. The Landoll 2100 Series Coulter Chisel incorporates this concept into high capacity - that translates to handling heavy residue at higher speeds with maximum efficiency.  Available in working widths from 8’ 9” to 31’ 3”, ...

    By Landoll Corporation based in Marysville, KANSAS (USA). from Coulter Chisel Product line

  • Tillage Items

    Fertilizer Knives. Disc Bearing Hangers. Chisel Shanks. Coulter Bars. Cultivator Shanks. Ripper Shanks. Digger Teeth. Fork Tines. Offset Shanks. Parabolic Shanks. Rake Tines. Reversible Points. S Tines. Scarifier Shanks. Vibra Tine Shanks. Disc Scraper Brackets & Disc End Washers

    By Haven Steel Products, Inc. based in Haven, KANSAS (USA).

  • SoilWarrior - Model N - Precise Seedbed Preparation Vertical Coulter Tillage Machine

    The soilwarrior n is ideal for fields requiring precise seedbed preparation, vertical coulter tillage (up to 6″) or shank tillage (up to 9″) with placement of liquid or dry fertilizer and/or nh3 sub-surface fertilizer.

    By Environmental Tillage Systems, Inc. based in Faribault, MINNESOTA (USA).

  • Sunflower - Model 4213 Series - Primary Tillage Tools

    The 4213 from Sunflower is the answer for removing soil compaction while opening up the surface for improved water intake and reduced erosion. This coulter chisel can completely fracture hardpans and eliminate soil compaction to a depth of 12' - 14' that a wider spaced shank arrangement would miss. With coulters spaced every 7 1/2' and shanks on ...

    By Sunflower Manufacturing - part of AGCO Corporation based in Beloit, KANSAS (USA).

  • Sunflower - Model 4213 / 4233 - Primary Tillage Tool

    Eliminate Soil Compaction While Managing Crop Residue. Soil compaction is a thief; robbing you of yields by denying your crop of nutrients and moisture. The 4200 Series from Sunflower is the answer. This coulter chisel can completely fracture hardpans and eliminate soil compaction to a depth of 12“. Equip the heavy chisel standards with ...

    By Sunflower Manufacturing - part of AGCO Corporation based in Beloit, KANSAS (USA). from Primary Tillage Tool Product line

  • Model 4000 series - Primary Tillage System

    The 4000 Series range is carefully designed, to help refine the soil by eliminating compaction, improving moisture control and reducing erosion. The perfect answer for removal of compacted soils down to 300 to 355 mm and opening up the soil for improved moisture control and reduced erosion. Hydraulically adjusted coulter gangs effectively ...

    By Challenger - part of AGCO Netherlands B.V. based in Grubbenvorst, NETHERLANDS. from Primary Tillage System Product line

  • Model KLG - Soil Tillage Implements Germinators

    Laumetris Ltd. produces trailed soil tillage implements - germinators of 3,6; 4; 5; 6; 7; 9; 12 m. width. Germinator is used for accurate soil cultivation in order to seed sugar beets, linen, rape and cereal in precise regulated depth. Depth of tillage – up to 80 mm. Every germinator consists of three or more sections (depends on ...

    By Laumetris Ltd based in Kėdainių District, LITHUANIA. from Soil Tillage Implements Germinators Product line

  • Model KLS - Hard Soil Tillage Cultivator

    Laumetris Ltd. produces trailed hard and moderate soil tillage Cultivators of 4 – 8 m. width, it is used for soil preparation to seed various types of crop. Cultivator stands on front and back rollers, there are 4 rows of spring tines with arrow type coulters between rollers. Distance between coulters is 110 mm. and such positioning allows ...

    By Laumetris Ltd based in Kėdainių District, LITHUANIA. from Hard Soil Tillage Cultivator Product line

  • V-Till - Super Duty Tillage Harrow

    The V-Till offers an affordable alternative for those low-residue tillage applications that require total loosening and do not need coulters. Bigham combines the proven advantages of tillage with award-winning Paratill Legs and a popular frame style. Super Duty V-Till® excels in high horsepower applications. ...

    By Bigham Brothers, Inc. based in Lubbock, TEXAS (USA). from Super Duty Tillage Harrow Product line

  • Blade Plow - Blade Plow Conservation Tillage Machine

    Orthman’s Blade Plow conservation tillage machine features large overlapping hard-faced sweeps, high-strength steel standards and durable cutting coulters to reduce residue hairpinning. With working widths from a maneuverable 33’ to a commanding 55’, the Blade Plow is a cost-effective option for killing weeds in fallow ground or ...

    By Orthman Manufacturing Inc based in Lexington, NEBRASKA (USA). from Blade Plow Conservation Tillage Machine Product line

  • BLU-JET - Model 4 - Sub Tiller Strip Tillage System

    The BLU-JET SubTiller 4 lifts and fractures hardpan and wheel compaction caused by heavy equipment. The deep penetrating shanks, 14' to 18', fracture up to 20' on either side of the shank with minimal surface disturbance. Large 20' spring cushion coulters easily cut through heavy trash. When crop residue is only slightly disturbed, erosion is ...

    By Thurston Manufacturing Company based in Thurston, NEVADA (USA). from Sub Tiller Strip Tillage System Product line

  • Model KLL - Pre-Sowing Tillage Aggregate Cultivator

    Laumetris Ltd. produces pre-sowing tillage machinery cultivators of 2 – 10 m. width. Cultivators are manufactured so that after one drive soil is leveled, hoed, compacted and ready for seeding. In the first row, there are segmented spring leveler boards, which are easily regulated from tractor with hydro gear. Further, there are 4 – 5 ...

    By Laumetris Ltd based in Kėdainių District, LITHUANIA. from Pre-Sowing Tillage Aggregate Cultivator Product line

  • Salford Coil-Tech - Model I-1200 - 1, 5` Blade Spacing Surface Tillage

    Designed for the finest surface tillage available, the I-1200 uses the Coil-Tech Coulter I, 1 1/4” independent blade mounting system to carry blades on the 5” spacing.  The I-1200 models average 40% more blades and 39% more weight per machine than the standard I-1100 that uses 7” blade spacing and a lighter frame.

    By Salford Group, Inc. based in Osceola, IOWA (USA). from 1, 5` Blade Spacing Surface Tillage Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you