Tillage Operation Equipment
-
Manufactured by Domries Enterprises Inc.based in USA
The reversible 3 point A frame hitch can be removed and installed on the rear of the machine, providing three different tillage operations, regular disking, reverse disking or flat furrowing and is done with no tools required. Simply remove and reinstall pins. ...
-
Manufactured by Simplicity Australiabased in AUSTRALIA
The 305 Series Allrounder is a simple, robust hydraulic tyne machine dually suited to secondary tillage operations and minimum till seeding. ...
-
Manufactured by Khedut Agro Engineering Pvt Ltd.based in INDIA
Khedut Mini Tiller is equipped with standard diesel engine with lower oil consumptio, more power output. Compact structure and light weight of machine makes easy for all farmingoperations apply in Mountain and Hilly areas. Mini Tiller is well suitable tillage operation with rotary blades un dry and paddy ...
-
Manufactured by Kello-Biltbased in CANADA
This model is perfect for plowing down of heavy residues and primary tillage operations and light industrial ...
-
Manufactured by Captain Tractors Pvt. Ltd.based in INDIA
Plough is used for primary tillage operations. It cuts trash and buries it completely. it is also used for turning green manure crop for decaying under the soil, which adds humus to the soil. Compost, Farmyard manure or lime when spread in the field, the mould board plough is used for turning and mixing these materials in the soil. ...
-
Manufactured by Rhino - a registered trademark of the Alamo Group Inc.based in USA
EarthMaster revolutionized the tillage industry by incorporating two tillage operations into one pass. This mixing increases microbial activity, quickens decomposition, and helps protect against erosion. The massive rear shanks go deep into the soil to lift and shatter the soil's hardpan and reduce ...
-
Manufactured by Rhino - a registered trademark of the Alamo Group Inc.based in USA
EarthMaster revolutionized the tillage industry by incorporating two tillage operations into one pass. This mixing increases microbial activity, quickens decomposition, and helps protect against erosion. The massive rear shanks go deep into the soil to lift and shatter the soil's hardpan and reduce ...
-
Manufactured by Shri Sai Agro Equipments Pvt. Ltd.based in INDIA
Two Bottom Reversible Plough has proved its excellent performance in its primary tillage operations by cutting clods much satisfactorily with very deep penetrations into the soil. With continous improvements since decades with a extra heavy 90 mm shaft and sturdy frame construction plough operates satisfactorily at heavy and varying ...
-
Manufactured by Cousins of Emneth Ltdbased in UNITED KINGDOM
The front mounted Disc Tiller has been developed for primary stubble cultivation. Used in conjunction with a rear mounted implement such as the Patriot combination cultivator it can optimise tillage operations especially single pass ‘min/max’ seedbed preparation. It has also proven effective in levelling ridges after potato ...
-
Manufactured by Shri Sai Agro Equipments Pvt. Ltd.based in INDIA
Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil. It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic Usage of heavy duty ...
-
Distributed by Schmidt Machine Companybased in USA
tillage operation. And with sizes to match even the largest high horsepower tractors, you can cover a large number of acres before the snow ...
-
Manufactured by Forward Farmingbased in AUSTRALIA
This outstanding piece of machinery allows for precision placement of seed at varying depths to suit soil moisture levels. The Precision Seed Placement Unit fits almost any tillage equipment, and operation of seeding becomes safer due to the positioning of the unit behind the cultivator ...
-
Manufactured by WILCOX Agri-Productsbased in USA
The Wilcox Heavy Duty Performer and Performer II - a maximum versatility, multifunctional ground driven mulcher (no PTO required) with both minimum tillage and conservation tillage functionality. Combines conventional, multi-pass tillage and bed operations (listing, lay-by, pre-working beds, side dressing, etc.) into one or two ...
-
Manufactured by Carl Geringhoff Vertriebsgesellschaft mbH & Co. KGbased in GERMANY
Two counter-rotating snapping rolls, each fitted with four knife bars, aggressively pull the corn stalks downward in a controlled motion. This enables the deck plates to strip the corn cob off the plant. The unchopped corn straw remains in the field, protecting the soil from ...
-
Manufactured by Orthman Manufacturing Incbased in USA
Pull-type 1tRIPr XD keeps Orthman out in front with precision tillage solutions for big operations. As the leader in precision strip-till systems and equipment around the world, Orthman is continually innovating more efficient ways to farm. With configurations up to 18 rows and a full range of high-capacity dry and liquid fertilizer ...
-
Manufactured by Ag Leader Technologybased in USA
Sub-inch accuracy, industry-leading steering performance and simple ...
-
Manufactured by Carl Geringhoff Vertriebsgesellschaft mbH & Co. KGbased in GERMANY
The Mais Star* MS-SC concept relies on the proven Mais Star* design: Two counter-rotating snapping rolls, each fitted with four knife bars, aggressively pull the corn stalks downward in a controlled motion. The integrated horizontal chopper requires a low amount of drive power to shred the gathered corn straw for faster rotting, virtually eliminating the need for mulching or follow-up chopping. ...
-
Manufactured by WILCOX Agri-Productsbased in USA
Wilcox Rolling Cutter - A new approach to PTO driven machines. The Wilcox Rolling Cutter offers growers a new high-speed, low maintenance approach to chopping using PTO driven machines operated at low speeds with costly drive lines, gear boxes and ...
-
Manufactured by Optigép Machine Manufacturing and Trading Ltdbased in HUNGARY
OptiSun Z sunflower headers are appropriate for harvesting fully mature sunflower. OptiSun Z headers are manufactured in 6 and 8 row versions with spacings of 76,2 ...
-
Manufactured by Carl Geringhoff Vertriebsgesellschaft mbH & Co. KGbased in GERMANY
The Mais Star* Horizon concept relies on the proven design of the Mais Star* models: Two counter-rotating snapping rolls, each fitted with four knife bars, aggressively pull the corn stalks downward in a controlled motion. The integrated horizontal chopper requires a low amount of drive power to shred the gathered corn straw for faster rotting, virtually eliminating the need for mulching or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you