Tiller equipment available in Andorra

  • Iseki - Model SA250 - Tiller

    SA250 can be used for both plough operation and rotor operation. Operator can choose 4 forward speed and 2 reverse speed for ploughing by various implement. The angle of handle is also changeable vertically and horizontally for comfortable operation. This machine complies with European safety regulation 'European safety regulation, ...

    By Iseki & Co., Ltd. based in Matsuyama-shi, JAPAN. from Tillers Product line

  • Iseki - Model KCR700 - Rotary Implement Built in Tiller

    KCR700 is rotary implement built-in tiller, and we designe the perfect weight balance for comfortable operation based on ergonomics This machine complies with European safety regulation ''EN709:1997+A4:2004''.  In order to operate on the hard ground, Duet Rotary system which rotation direction between outside blade and inside blade are ...

    By Iseki & Co., Ltd. based in Matsuyama-shi, JAPAN. from Tillers Product line

  • Iseki - Model SA600 - Tiller

    SA600 is adopted ergonomical design for pursuing comfortable operation to change lever of machine without any stress. This machine complies with new European safety regulation EN709:1997+A4:2004 and equipped new safety composition 'Parking Brake and Double Lock Clutch Lever''.  Thanks to this composition, operator can work safely. PTO and ...

    By Iseki & Co., Ltd. based in Matsuyama-shi, JAPAN. from Tillers Product line

  • KAMT - Model FL Series - Soil-Cultivating Tillers - Light Type

    The family of soil-cultivating tillers – light type is designed for fused pre-sowing soil-cultivation and between the rows of perennial plants ploughed and not ploughed areas with slope to 8° and clean of stones. They are aggregated with under dimensions and lighter types of tractors.

    By KAMT Joint-Stock Company based in Karnobat, BULGARIA. from Tillers Product line

  • Model TFM Series - Tiller

    High resistance st 52.3 galvanised tubular frame . High resistance, flexible spring piston . Independent legs in hardened steel . Gudgeon pins in turned steel with lubrificator . Gudgeon pin housing bushes in a self-lubricating material . 190 mm spike ploughshares made of wear proof steel . Category 1 and 2 linkage attachments supplied as standard ...

    By Bargam S.p.A. based in Imola, ITALY. from Earthwork Product line

  • Model BL 105 - Tillers

    Engine: 4 Stroke 5,5 HP. Transmission: Gears in oil bath. Speeds: 2 Fwd + 1 Rev. Handle br: Fully adjustable. Tiller: Cm. 65-90-100. Weight: Kg. 76-100

    By Benassi S.p.A. based in S. Matteo della Decima, ITALY. from Professional- Tillers Product line

  • Tillers

    The second product in Bestbier’s Agri division is a custom-built tiller. As every farmer has specific requirements very much different from the next, this product is completely customisable, i.e. number of tines, operational width, beam thickness, roller, etc. The standard tiller, if no special design is required, has 31 s-shank kongskilde ...

    By Bestbier South Africa based in Bloemfontein, SOUTH AFRICA.

  • Model BL 120 - Tillers

    Engine: 4 Stroke 8 HP. Transmission: Gears in oil bath. Speeds: 3 Fwd +1 Rev. Handle bar: Fully adjustable. Tiller: Cm. 65-90-120. Weight: Kg. 82-110

    By Benassi S.p.A. based in S. Matteo della Decima, ITALY. from Professional- Tillers Product line

  • Model BL 6000 - Tillers

    Engine: 4 Stroke (4,5 - 4,9 HP). Transmission: Gears in oil bath. Speeds: 2 Fwd + 1 Rev. Handle bar: Fully adjustable. Tiller: Cm. 60-80. Weight: Kg. 61,5

    By Benassi S.p.A. based in S. Matteo della Decima, ITALY. from Professional- Tillers Product line

  • Model RPH - Tiller

    The RPH tiller has been designed to meet the demands of medium to large farming companies.  The anchors feature a shear bolt safety system, while the double rear roller can be adjusted by the hydraulic cylinder. 5 to 9 anchors are possible depending on the working width.

    By Valentini Antonio Srl based in Camposampiero (PD), ITALY. from Cultivators Product line

  • Loncin - Model LC360 - Front Tine Tillers

    This is a fantastic value tiller, with low fuel consumption and very easy to use. Ideal for small, awkward flower beds, vegetable gardens and allotments. With a 35cm cutting width and powered by a high specification Loncin engine.

    By E P Barrus Ltd based in Bicester, UNITED KINGDOM. from Tillers - Front Tine Tillers Product line

  • Model T450 - Rear Tine Tillers

    The T/450 is our heaviest duty 46cm/18' tiller, that features a 6.5 hp Briggs & Stratton engine. This unit is a rear tine tiller that has reverse on both the tines and the drive wheels. The reverse on the wheels is essential for manoeuvrability while the reverse on the tines gives the option of either digging or lifting the soil, this enables ...

    By E P Barrus Ltd based in Bicester, UNITED KINGDOM. from Tillers - Rear Tine Tillers Product line

  • Model ASR - Rotary Tillers

    PTO drive shaft at 540 r.p.m o 1000 r.p.m. Gearbox of 4 speeds. Side transmission by means of chain. 6 knives per flange Ø 530 mm. Depth control by means of skids, ruedas o rodillo. Linkage category II. PTO driven shaft with security clutch.

    By Agrator S.L. based in Vitoria-Gasteiz (Alava), SPAIN. from Rotary Tillers Product line

  • Tortella - Model T0 - Rotary Cultivator with Chain Drive

    STANDARD EQUIPMENT: 3 point linkage // 4 curved external facing blades per disk // Depth regulating skids // PTO w/bolt restrictor // 540 rpm PTO // Attachments for offset up to 20 cm (3p only). ALTERNATIVES: 90 blades // Left PTO rotation. OPTIONS: 6 blades per disk // 750 rpm PTO.

    By TORTELLA S.P.A. based in Ortona (CH), ITALY. from Rotary Tillers Product line

  • Model 1GQ-250 - Rotary Tiller

    Adjustable rear flap for safety as well as providing a smooth finish ~ 6 extra strong blades per flange for a more thorough tilling of top soil ~ height adjustable skids for depth control ~ extra strong design for long life & reliability.

    By Hanmey Implements based in Jiangsu, CHINA. from Rotary Tiller Product line

  • TAYFUN - Disc Tiller

    For your requirements of “tilling on the top surface in short depth” we offer ADY series Azim Disc Tillers. The suggested work depth of the machine is 10-15cm from the top level of soil. The machine has notched discs which increases the “breaking effect” and “seed bed preparation efficiency” of the machine ...

    By Azim Ziraat Aletleri San. ve Tic. A.S. based in Germencik, TURKEY. from Disk Tiller Product line

  • Ercules - Model 3000 - Rotary Tiller

    The rotary tiller of the series Ercules is the ideal machine for big farmers and contractors. Suitable for works on unbroken soils, is designed for tractors up to 220 HP .The working depth, up to 28 cm, is adjusted manually from the tractor’s seat, but it’s also available with the hydraulic adjustment option. The rotor is equipped with ...

    By Valentini Antonio Srl based in Camposampiero (PD), ITALY. from Rotary Tillers Product line

  • Maxisqualo - Model 3000 - Rotary Tiller

    The rotary tiller of the series Maxisqualo is the ideal machine for big farmers and contractors. Suitable for works on unbroken soils, is designed for tractors up to 150 HP The working depth, up to 28 cm, is adjusted manually from the tractor's seat, but it's also available with the hydraulic adjustment option. The rotor is equipped with the ...

    By Valentini Antonio Srl based in Camposampiero (PD), ITALY. from Rotary Tillers Product line

  • Maschio - Model L Series - Offset Rotary Tillers

    Offset rotary tiller of small dimensions, recommended for hobby farmers and small farms, suitable for vineyards, orchards, vegetable crops and gardening. Particularly designed to have a sturdy build and a low power requirement to match light tractors.

    By Maschio Gaspardo S.P.A. based in Campodarsego (PD), ITALY. from Rotary Tillers Product line

  • 62` Heavy Duty Rotary Tiller

    This 62' heavy duty, all gear drive tiller is powder coat painted. It comes standard with a #4 series driveshaft with torque limiter, removable tine shaft and tines, and adjustable skid shoes. Gearbox and tine bar can be reversed for reverse rotation and is quick hitch compatible.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from Rotary Tillers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you