Tine Length Equipment
-
Manufactured by Hesse Metalltechnik GmbHbased in GERMANY
Type BAS HL (for courtloader/skid-skeer-loader) thick material main tube with welded cones, high value full material, tine length 1000mm, height ...
-
Manufactured by Hesse Metalltechnik GmbHbased in GERMANY
Type DG EA (for frontloader with EURO-Quick-coupler) tine length 800mm thick material main tube with welded cones Height ...
-
Manufactured by Wifo Farm Equipment Limitedbased in CANADA
Fixed tine pallet fork for 3-Point Hitch category I or II. Available with 42' or 48' tine ...
-
Manufactured by Hesse Metalltechnik GmbHbased in GERMANY
Type DG HL (for courtloader/skid-skeer-loader) tine length 800mm, high value full material thick material main tube with welded cones height ...
-
Manufactured by Hesse Metalltechnik GmbHbased in GERMANY
TYPE DG KL (for frontloader with auto-latch) tine length 800mm thick material main tube with welded cones height 700mm with standard ...
-
Manufactured by Hesse Metalltechnik GmbHbased in GERMANY
Type DG RL/TL (for wheel- or telescopic loader) tine length 1000mm thick material main tube with welded cones wear resistant sub- construction, Höhe ...
-
Manufactured by Evans & Reid Ltd.based in UNITED KINGDOM
Ideal for landscaping and land reclamation. Bespoke design, allowing customers to choose tine length, tine spacing, rake width and cross bar position. Evans and Reid manufacture at our factory in Neath, South Wales a full range of land rakes for all makes and models of excavator up to approximately 20 tonnes in weight. We can manufacture ...
-
Manufactured by Marv Haugen Enterprisesbased in USA
Heavy duty frame. Three 1 3/4" diameter cold rolled tines. Useable Tine length 29". All tines are replaceable. Built-in Step ...
-
Distributed by Concentric Internationalbased in USA
Heat treated tines for long lasting performance. Consistent rubber quality assured by injection molding. Hook style head for maximum rubber adhesion. Dimensions. Yoke height: 1-3/8'. Bolt hole diameter: 5/16' , Tine length from bottom of yoke: 7-1/4'. Tine diameter: ...
-
Manufactured by Argnani & Monti S.r.l.based in ITALY
Length x height mm.: 1170 x 1200. Length with tines open mm.: 1450. Length with tines closed mm.: 220. Max. loading capacity kg.: 900. Weight kg.: ...
-
Manufactured by Rata Equipmentbased in NEW ZEALAND
Tines are forged spring steel, held in with a conus 2 welded taper bush. These high strength bale forks can be made to fit almost any Tractors front end loader or Telehandler. Featuring a removable center safety tine. RHS heavy wall box section frame for huge strength, tines are supported with full-length conus bushes. ...
-
Manufactured by Rylind Manufacturing Inc.based in USA
Rylind Paddle Top Clamp Forks can be used for clearing Logs, Brush, Lumber, Pipes, Beams, Railroad Ties and many other things. Top Clamps are paddle connected and operate together, and have a Carriage width from 72” to 120” and Tine Lengths from 48” to 120”. Tines are manually or hydraulically adjustable. Third ...
-
Distributed by Tracks Plusbased in USA
Our custom configuration, made with US steel, lets you decide how to get your job done right. 3 forged, tappered spears. The threaded ends make it simple to repostion the spears, to accomodate round or square bales. 36"Tine length, with a rating of 1900 lbs./each. Our Walk through bulk head, also features a key way hole on each end so you ...
-
Manufactured by Forigo Roteritaliabased in ITALY
Universal 3 point linkage Cat. 2 Single speed gearbox 540 rpm PTO Compact low encumber machine Front section composed by power harrow with 200 mm centre-to-centre rotors Special Tine system bi-directional "ZEUS" ideal for a low power absorption Tine length 280 mm Rear section composed by crumbling rotor Ø360 mm with high ...
-
Manufactured by D&E Manufacturing Inc.based in USA
The hydraulic loader rake will add power and grip to your loader for heavy-duty raking, stacking or loading.We can build to any length or tines thickness ...
-
Manufactured by Martatch Attachmentsbased in CANADA
36' Conus I cranked tines at 8' centers. 31' usable length. from 42' to 108' widths. Available in skidsteer and loader profiles. Original Kverneland Tines - Simply the best available on the market!. OPTIONAL: 32' Conus I cranked tines with 26' usable ...
-
Manufactured by Grays Equipmentbased in UNITED KINGDOM
The bale-carrying heavy duty main tine is of resilient forged spring steel, tapered along its length, and counter tapered for rigidity into a seating collar in the backframe.All Grays Bale Spikes are fitted with a 4ft (1.2m) long main tine with a usable length of 43" (1.1m). The stabilising tine protrudes 11" ...
-
Manufactured by Martatch Attachmentsbased in CANADA
Available from 60' to 108'. Useful for large bales, manure, debris, logs, stones, etc. Can be fitted on any front end loader or skid steer. 36' Conus I cranked tines – 31' useable length at 8' centers. Original Kverneland Tines - Simply the best tines on the ...
-
Manufactured by Grays Equipmentbased in UNITED KINGDOM
Grays Stoneforks are supplied as standard with 3 point linkage fitting for either the rear linkage or a front linkage if available. All the tines are high quality heat treated tines mounted in full length tapered collars. The 2m-wide model has 19 in the bottom section at 4. 1/8' spacing giving 2. ½' gap between the tines ...
-
Manufactured by MDE Machinery Ltdbased in NORTHERN IRELAND
Our first and smallest member of the Falcon range. The MDE Falcon Push Off can handle high quantities of grass and carry it up the pit with ease. Traditionally made to attach to the tractors 3 point linkage, we have an adapter linkage so that the Falcon can be used on Telehandlers or Wheeled Loaders. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you