tooth-blade mower Equipment in Europe

  • Premium

    Minos Agri - Rotary Drum Mower

    It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with blades rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely to each other and leaves them behind in the form of barrel. With the advantage of adjustable cutting height and the high quality of the cutting ...

    By Minos Agricultural Machinery based in Gaziemir, TURKEY. from Rotary Mowers Product line

  • Thoot-blade - Model BF - Sickle Bar Mowers

    Sickle bar mowers DCM are very silent and have an high cutting quality. Sickle bar mower BF is available in 5 different cutting sizes: 165 cm, 190 cm, 210 cm, 240 cm and 270 cm. Available versions with teeth and sections with nail. For models BF 190, BF 210 and BF 240 is available a version with teeth and sections with bolts. The version with ...

    By DCM Italia s.r.l. based in Borgo Val di Taro (Parma), ITALY. from Sickle Bar Mowers Product line

  • AGRIPUL - Model AP-7001 - Single Bar Sickle Mower

    Sickle Bar Mower is mounted to tractors by three point Linkage system and operated by PTO of tractor. By the help of tooth-blade motion system it makes possible a scissors cut which leads to a high speed operation on any crop. Also tooth-blade motion guarantees a sharp and clean cut on any type of grass, be it wet or flattened.

    By AGRIPUL Farm Machines Ltd. Co. based in Karatay, TURKEY. from Mowers Product line

  • Thoot-blade - Model BF MJ - Sickle Bar Mowers

    Sickle bar mowers DCM are very silent and have an high cutting quality. Sickle bar mower junior BF MJ is available in 4 different sizes: 105 cm, 120 cm, 135 cm e 150 cm and it is suitable for the small tractors. BF MJ is available with teeth and sections with nails. All models are available with hydraulical lift(HI version) or with mechanical lift ...

    By DCM Italia s.r.l. based in Borgo Val di Taro (Parma), ITALY. from Sickle Bar Mowers Product line

  • Topper Mower

    Single blade rotor with swinging blade tips; floating top link; PTO shear bolt protected; height of cut adjusted by side skid 25-100mm.

    By D W Tomlin based in Boston, UNITED KINGDOM. from Mowers Product line

  • Flail Mowers

    Optional extras: manual or hydraulic sliding headstock; hammer blades in lieu of standard blades.

    By D W Tomlin based in Boston, UNITED KINGDOM. from Mowers Product line

  • Model Omega - Mowers

    Structure of chassis in sheet of 5 mm. Lateral skates in 8 mm thickness adjustable in height by 3 positions. Girder on the center of the machine for strengthen the power unit in sheet of 8 mm. Back part rounded to make easy the drafts. Front and rear protections in wear chain to absorb all the projections. Lateral chains of high safety to adapt ...

    By Niubo Maquinaria Agricola based in Torregrossa (Lérida), SPAIN. from Mowers Product line

  • BIRBA - Fix Reversible Mulcher

    The BIRBA model is suitable for grass cutting and maintenance in parks and gardens. The machine can be used at the front or rear of the tractor. The rotor is available with hammers, suitable for mowing ornamental lawns, or with articulated blades, which is more suitable for grass cutting and small twigs. Fix reversible mulcher for grass and ...

    By MASCHIO GASPARDO SpA based in Campodarsego (Padova), ITALY. from Mowers Product line

  • AGRIPUL - Model AP-7000 - Ap 205 Rotary Dısc Mower Indexıble

    Animal feed which is clean and rich in terms of energy is the main principle of a profitable stock breeding. This mechanism AP 205 - AP 240 Compression-disc pasture and alfalfa mower which is divided into two as disc and compressed disc raises up, with the effect of air flow created by oval-type two-blade discs when they rotate, the plants which ...

    By AGRIPUL Farm Machines Ltd. Co. based in Karatay, TURKEY. from Mowers Product line

  • Finishing Mower

    Suitable for cutting semi lawn areas;  3 blade rotors, belt driven, depth control by 4 pneumatic wheels adjusted by spacers or optional rear roller. Height of cut 25-100mm.

    By D W Tomlin based in Boston, UNITED KINGDOM. from Mowers Product line

  • Model OVNI - Mowers

    Structure of chassis in sheet of 4 mm. Lateral skates in 8 mm thickness adjustable in height by 3 positions. Girder on the center of the machine for strengthen the power unit in sheet of 6 mm. Back part rounded to make easy the drafts. Front and rear protections in wear chain to absorb all the projections. Lateral chains of high safety to adapt ...

    By Niubo Maquinaria Agricola based in Torregrossa (Lérida), SPAIN. from Mowers Product line

  • Model ts125 - Plough Blade

    Safety is of prime importance The ts125 plough blade has a patented safety mechanism. If the plough blade encounters an obstacle, e.g. an obviously protruding manhole cover, an overload safety mechanism is activated. The blade tilts away from the danger area, practically without expenditure of energy. The peak load is reduced to a minimum, in ...

    By Julius Tielbürger GmbH & Co. KG based in Stemwede-Oppenwehe, GERMANY. from RIde on Mowers Product line

  • Model BF-BFS - Double Blade Sickle Bar Mower

    The Enorossi Sickle Bar Mowers come from an accurate study for a wide variety of uses especially in pastures. BF/BFT series with riveted guards and BFS series with bolted guards. All mowers are standard equipped with: safety device, breakaway system, internal shoe compensating spring, cardan shaft, extra blade and blade protection.

    By Enorossi based in Calzolaro di Umbertide, ITALY. from Disc Mowers Product line

  • Model Series: FM - BF - BF-H - Single Blade Mowers

    Three types of single blade mowers are available: BF Series with mechanical lifting mechanism, BF-H Series with hydraulic lifting mechanism, FM Series for Mini-tractors with a 3 point hitch. These are been developed for rapid attacment to all tractors between 15 to 80 HP and are built with a lightweight but strong tubular frame set on ...

    By Giaccaglia Giuliano & C. S.N.C. based in CERBARA, ITALY. from Mowers and Rotary Tedders Product line

  • JAGODA - Model 1,6 m / 1,8 m - Orchard Mower

    Orchard mower JAGODA is produced in version 1,6 (1,6 meters of working width). Version 1,8 (1,8 meters of working width) is produced on request. These are the most popular models, perfect for both orchards and berry fields. The body is made of stainless metal. The cutting element is in fact a set of four rotating blades and one blade installed on ...

    By JAGODA JPS based in Skierniewice, POLAND. from Mowers, Slashing Mowers Product line

  • Model GLM - Blade Mower

    Thanks to its low weight and the minimum power requirement particularly suitable for smaller tractors even on steep slopes. The blade mower is equipped with two swing arms, swinging out vertically thus adjusting to any ground unevenness. The mechanical sensing of the stem with spring-load controller and rubber armouring on the swing disks or two ...

    By Fischer Mulchgeräte GmbH based in Tramin (BZ), ITALY. from Agricultural Product line

  • Verticut - Model TT - Mowers

    This dedicated machine brings professional verticutting to every facility. With a 510mm (20”) operating width and tungsten tipped blades, it is ideal for golf greens, bowls,cricket and ornamental lawns. Regular use of this machine will help reduce thatch, improve the sward and encourage finer grasses to flourish and increased ball speed on ...

    By Dennis Mowers based in Kirk Langley, UNITED KINGDOM.

  • SuperSix - Mower

    Built on the FT principle, the Super Six is almost the same with simpler height of cut adjustment. Available as 17” (43cm), 20” (51cm) and 24” (61cm) widths. Interchange cassette system giving option to fit 10 different heads including scarifiers, verticutters, brushes, spikers and slitters as well as 5 or 9 blade cutter ...

    By Dennis Mowers based in Kirk Langley, UNITED KINGDOM.

  • Model 4520ZSR - Mower

    The 4520 is one of two ZSR Series Articulators offered to meet a wide range of cutting needs. The model 4520 is the most productive ZSR Series Articulator and features a 120” (3 M) wide deck that uses five 25” (635 mm) rotary blades.

    By Lastec Inc. Office in Maidstone, UNITED KINGDOM. from ZSR Mowers Product line

  • Razor Ultra - Model 560 - Mower

    The Razor Ultra 560 has been developed to specifically meet the demands of golf greens & tees, cricket pitches and bowling greens. The machine has a 560mm (22”) cutting width and incorporates many key features, 11 bladed cutting cylinder, ultra short wheelbase for undulating greens, tungsten tipped groomer, click height adjusters and ...

    By Dennis Mowers based in Kirk Langley, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you