Tractor Cab Equipment In Canada
-
Manufactured by Yanmar America Corporation, A Part of YANMARbased in USA
Through its low compaction, outstanding mobility, easy operation, simple maintenance and lots of field-oriented features, Yanmar’s T80 Comfort Cab Edition (CCE) rubber-track crawler brings new and innovative benefits to vineyard and orchard management that far outshine conventional ...
-
Manufactured by Univerco, Inc.based in CANADA
% of onion tops in most conditions. Harvest capacity of up to 35 to 40 tons/hour. Ideal for harvesting in dry or wet conditions. The quality of work by the topper table is not affected by weeds at all. The time that onions will remain on the topper table is adjustable. Loading conveyor speed and folding is controlled from the tractor cab. Loading ...
-
Manufactured by Sunflower Manufacturing - part of AGCO Corporationbased in USA
ground or on a slope, the Sunflower 9800 works well in all conditions. Hydraulic down pressure on the openers, which is adjustable on the go from the tractor cab, eliminates the need to adjust springs or individual row openers. Thanks to the 9800 Single Disc Drill’s patented design, we’ve also eliminated the need for a gauge wheel ...
-
Manufactured by Unverferth Manufacturing Co, Inc.based in USA
Take your harvest to the Extreme with the all-new 19-Series XTREME grain cart from Unverferth. Featuring an exclusive front-folding, single corner-auger with a forward reaching design, the 19-Series lineup of grain carts positions the downspout up to 6' ahead of the hitch for an enhanced line of sight from the tractor cab. The upper auger ...
-
Manufactured by Manac, Inc.based in CANADA
Capacity of 23.5 yds3 with 10” bang boards Benefit :Greater load capacity. Twin 8” bore air cylinders outside mounted. Adjustable slide locksBenefi t : Allows for 6 preset openings from 8” to 30”. Gate control - electric over airBenefit :Can be operated from the cab of tractor or manual from the ground. Heavy duty ...
-
Manufactured by Bush Hog - a member of the Alamo Groupbased in USA
no limit to what you can accomplish. They’re easy to operate and built to provide years of dependable service. NOTE: (RMB models to be used on tractors equipped with cabs only, and for rotary mower heads, protective screen material must be ...
-
Distributed by J.G. VanOostrum Farm Equipment Ltd.based in CANADA
cab, mfd, powershift, T-rail duals, no 3 point hitch. murphy shutdown. Rear inner tires are brand new! Cab, ...
-
Manufactured by John Deerebased in USA
If power gets the job done, then the 6155M is ready, willing and able. Cycle big loads and heavy implements with 30 gpm (113 lpm) of pressure-flow compensated hydraulic performance. Match your transmission to the application … choose from several options, including a 25 mph (40K) or a creeper option with speeds as low as .09 mph (1.4 km/h). All PowrQuad™ transmissions feature a ...
-
Manufactured by John Deerebased in USA
If you've got acres to plant, some big chores to take care of and need a comfortable, capable tractor that has the right mix of automation and mechanical efficiency, the 6175M could be what you need. With a durable John Deere PowerTech engine that responds almost instantly to changing demands, the need for shifting gears, fuel ...
-
Manufactured by John Deerebased in USA
With the 6145M, you get the right mix of automation and mechanical efficiency in a compact but powerful package. Choose from several transmission options, including a 25 mph (40K) or a creeper option with speeds as low as .09 mph (1.4 km/h). All PowrQuad™ transmissions feature a left-hand reverser for no-clutch, no-skid loader work. The 6145M is a powerful, versatile, heavy lifter that ...
-
Manufactured by LEON Mfg. Company Inc.based in CANADA
The LEON BH855 Bale Handler is a heavy duty built 'HYDRAULIC PUSH OFF' designed to handle from 8 to 15 round bales in 48" to 72" width capacities. Featuring 'two row' or 'three row' capabilites, heavy duty frame, and smooth hydraulic push off unloading technology, the LEON BH855 can transport bales up to 3750 lbs, both wet and dry. The service friendly, trouble free maintenance design allows for ...
-
Manufactured by Master Industries Inc.based in CANADA
Built heavier to move more material and last longer. The Master DO All features electric over hydraulic control that allows you to tilt and angle the blade, superior welded cylinders and heavy duty plate steel construction, removeable side plates and rear weight ...
-
by Lelybased in NETHERLANDS
The biggest difference between a trailed mower and a front or rear mower is that by making use of a transport frame, weight plays much less of a role. Trailed mowers consequently have a very high specification and have the best possible contour-following system. Ideal for use with a light tractor to give perfect results under most ...
-
Manufactured by SAME DEUTZ-FAHR - SDF Groupbased in USA
DESIGNED TO SIMPLIFY YOUR LIFE. ENGINEERED TO MAGNIFY YOUR RESULTS. With the 9 Series DEUTZ-FAHR engineers have developed an ultra-modern, highly intelligent, high-horsepower tractor, which performs and increases the operating efficiency largely thanks to unique operating comfort, automated routine functions and the most innovative ...
-
Manufactured by Antonio Carraro Spabased in ITALY
A formidable articulated tracked tractor with four rubber tracks and a 98 hp Kubota engine. The flagship of the R Series for its outstanding performance and imposing appearance. Designed for use in extreme conditions where other tractors cannot operate: steep gradients (including side slopes) and tough terrain. On mud, snow, loose earth, and ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The Saphir 8 is identical to the Saphir 7 mechanical seed drill except that the seeding shaft is electrically driven giving in-cab control of seed ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
Powerfarm 110 Cab and Plat is a tractor featuring a clean and modern design. The Perkins 1104 series , 4-cylinder turbo engines offer high fuel efficiency low noise and reduced emissions and ensure a high torque backup. The modular transmission is available in versions mechanical (Speed Four 12FWD+12REV), on request with creeper or ...
-
Manufactured by Landoll Corporationbased in USA
;, these units will work with a wide range of tractor sizes and provide ultimate productivity for nearly any operation. The concept combines straight cut 22” coulters, spaced at 7 1/2”, with high clearance chisel shanks, spaced at 15”, for fracturing the soil while sizing and blending the residue. Shanks are arranged to follow a ...
-
Manufactured by Metal Pless Inc.based in CANADA
Universal subframe exclusive to Metal Pless. Double action hydraulics ‘‘Pression Maxx‘‘ exclusive to Metal Pless. 180° multiple hydraulic side wing positions. Side wings made of "Heavy duty" steel CHT400. HD CHT400 steel multi-section mechanical trip edge ½’’ x 6’’ (Std). SOFT drive mechanical steel trip edge, "Heavy duty" multi-section ...
-
Manufactured by MAMMUT Maschinenbau Ges.m.b.H.based in SWITZERLAND
The Silage Comb Professional is the perfect silage extraction device for farm sizes from 25 animals to 120 animals and more. A hydraulically driven ‘comb’ loosens and removes the silage and fills the container with up to 4.6 m³ of load volume. The fundamental benefit over other systems is that removal, transportation, intermixture of additives and feeding all take place with a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you