Trailed Harvester Equipment In Australasia
-
Manufactured by FACMA s.r.l.based in ITALY
The Trailed Harvesters are suitable for the picking from the ground of: hazelnuts, chestnuts, almonds, walnuts, coffee, macadamia, pecan walnuts and olives. The Trailed Harvesters born by this times in the far ’70s years, are the first machines created by FACMA and still now they are considered an important part in the ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
Simple and robust, this is the formula for the development of the trailed beet harvester ROOTSTER with 4-ton overloading bunker, which are available as 6-row variant. All machine functions can be conveniently controlled via an operator terminal. All other drives are mechanical and of low-maintenance design. This does not only make it ...
-
Manufactured by Kimseed Australia Pty Ltdbased in AUSTRALIA
The Kimseed Trailed Brush Harvester provides a simple and effective means of harvesting grass seeds. It is towed by a road vehicle or tractor. As the harvester moves through the pasture, ripened seed is combed upwards off the plants and thrown rearwards into a catchment hopper, giving a relatively clean sample which requires ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
Grimme is the most successful manufacturer of specialist potato machinery in the world. Based in Damme, Germany, Grimme provides a full range of potato harvesters, from single row diggers to the most sophisticated computer-controlled self-propelled machines. Grimme also manufactures a full range of planters and in-store handling ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The 6-row inline front mulcher FM has been developed for the 1-phase process in combination with the ROOTSTER 604. A counter rotating multi shaft and cleaning shaft rotating in driving direction very gentle defoliate the beet. The result are beet heads without any leaves and this achieves clearly higher volume yields then with the conventional scalping method. Machine setting to 45 or 50 cm row ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The 6-row inline-front topper FT 300 with its patented leaf discharge reliably avoids irritating blocking in the scalper area. The machine has been developed for the 1-phase system in combination with the ROOTSTER 604. In addition, this system ensures an optimum distribution of the chopped leaf mass, thus providing the best conditions for a reduced soil cultivation. Flexible row width adjustment ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The 6-row defoliator BM 300 / BM 330 developed for the 2-phase process. It chops and removes the beet leaves across the entire machine width. Equipped with a durable steel flail shaft , as well as two non-wear cleaning rubber flail shafts. Optionally, a disc scalper are available which ensures a precise contour guidance. Working widths between 45 cm and 56 cm available for the BM 300 / BM ...
-
Manufactured by FACMA s.r.l.based in ITALY
The Trailed Harvesters are suitable for the picking from the ground of: hazelnuts, chestnuts, almonds, walnuts, coffee, macadamia and olives. These machines constitute the fruit of development, knowledge and technologies, and they represent the FACMA reply to the mechanized harvesting of the ...
-
Manufactured by Kimseed Australia Pty Ltdbased in AUSTRALIA
This version of the Brush Harvester can be attached to the front end loader of a small tractor or Bobcat. Just like the Trailed Brush Harvester, this machine is also available in 1.5 and 2-metre widths. ...
-
Manufactured by FACMA s.r.l.based in ITALY
The hydraulic rotating brusher permits to form windrows or rows of produce on the ground, making easier the following harvest by trailed or self-propelled machines. It is formed of rubber scraper elements and it is connected to the tractor. The brusher is powered by the tractor’s hydraulic clutches, it is endowed with a lift ...
-
Manufactured by FACMA s.r.l.based in ITALY
Facma fans VA2 and VA2 PLUS blow the produce into windrows, piles or rows of product on the ground, making the harvest easier for both the trailed and self-propelled harvesters. Both fans models can be connected to the tractor’s power plug. In the VA2, the air generated by the fan moves the produce that has fallen to the ground ...
-
Manufactured by Reese Group Ltdbased in NEW ZEALAND
The benchmark harvester of all Tow-Behind grape harvesters. With the Nairn picking head, a robust chassis designed to last the years and many options on configuration, this is the most popular harvester ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you