Tree Felling Equipment In Canada
-
Manufactured by Norwood Sawmills Inc.based in USA
Like a high-lift jack, the TimberTool cranks up to 1.8 tons/inch2 pressure against the tree. This power helps: Push the tree in the fall-line you’ve chosen. Force the felling cut open so the tree can’t settle and bind your chainsaw bar. Reduce the need for time-consuming wedging and cabling. Ruggedly built of ...
-
Manufactured by GMT Equipmentbased in NETHERLANDS
The GMT050 grapple saw is the ideal tree felling equipment for cranes with approximately 10 tons/meter. With a maximum cutting diameter of 20 inches, you can fell almost any tree. Easy installation of the grapple saw within 2 hours and no additional hydraulic lines or electric control cables are required because of the patented ...
-
Manufactured by Loewen Equipment Manufacturingbased in CANADA
You will do more than you ever thought possible with the Loewen High Rotation Wrist, giving you more versatility and productivity. It will allow you to cut standing trees, and wind fell trees, and place them in bigger bunches at any angle with a lot less movement of the carrier, increasing skidder ...
-
Manufactured by Hypro ABbased in SWEDEN
The HYPRO FG45 felling grapple is ideal for use in the handling of both standing and felled trees. The felling grapple can be mounted on just about any crane with a rotator. The felling grapple can be used to fell normal-height standing trees with a max. diameter of 30–35 ...
-
Manufactured by Ponsse Plcbased in FINLAND
The efficiency, economy and compact size of the PONSSE H6 harvester head makes it the best general harvester head on the market. The PONSSE H6 harvester head is highly versatile, and its use ranges from thinning sites with small trees to regeneration ...
-
Manufactured by AFM-Forest Ltdbased in FINLAND
AFM 75 FH is a compact and cost-effective attachment for various forest operations. AFM 75 FH can be used in tree felling, cross cutting and even for loading. The AFM 75 FH Felling head is commonly used also in forest clearing after storm or for road, pipe line and power lines construction. The excavator equipped with AFM 75 FH can be an ...
-
Manufactured by Logset Oybased in FINLAND
The Logset TH65 is a versatile head built for thinning and final felling on all types of sites. It is compact for early thinning operations, yet powerful enough to fell trees up to 65 cm. Optimal productivity is achieved with diameters up to 45 cm. The head is well matched with the Logset 8H GT harvester. The Logset TH65 has all the ...
-
Manufactured by Rottne Industri ABbased in SWEDEN
Rottne simulator – as close to reality you can come. For training and support, Rottne simulator gives a real-life operating experience that contributes towards know-how and interest. The machine’s engine, powertrain and hydraulic system are simulated in a real-life manner. The operator receives a credible sensory impression through amazing graphics and an advanced motion ...
-
Manufactured by Waratahbased in CANADA
Innovatively designed for superior performance in late-thinning and final-harvest applications, the Waratah H270 Series II high-capacity harvester head comes with a package of improvements designed to work as hard as ...
-
Manufactured by Hypro ABbased in SWEDEN
The HYPRO 755 VB is the latest processor from HYPRO – a trailer-mounted HYPRO 755 without crane, winch, pump or tank. The processor is simply mounted directly on your forest trailer and uses the hydraulic system of the trailer to operate. Easy to connect and ...
-
Manufactured by Hypro ABbased in SWEDEN
The wheel carried 755 only adds 200 kg to the tractor hitch. This makes it very suitable for use with lighter tractors. Nimble and easily manoeuvred with articulated steering, this processor is very suitable for use on sensitive terrain since the weight is spread over several wheels. It is driven by the power take-off via a wide angle shaft, and the pump and tank are both mounted on the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you