Only show results in Virginia? Ok

Tree Radius equipment

  • Model DR - Radius Dendrometer

    The sensor is anchored by two special screws in the heartwood. The changes outside of the heartwood correspond to the radial growth. The arrangement ensures high stability for long-term measurements.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Tigercat - Model 718E - Tree Feller Bunchers

    With excellent visibility to the rear wheels, a tight turning radius and short overall length, the quick and compact 718E feller buncher is the ultimate machine for plantation thinning applications. Plantation row thinning is an intensive and demanding application with fast cycles and a great deal of machine travel. The 718E is simple and ...

    By Tigercat Industries Inc. based in Brantford, ONTARIO (CANADA). from Tree Feller Bunchers Product line

  • Model 7 - Under Tree Irrigation Sprinklers

    1/2' male threaded inlet. Trajectory angle : 7° or 16°. Front nozzle from Ø2.5 to Ø3.2 mm. Discharge from 0.29 to 0.64 m³/h.  Radius from 6.8 to 9.7 meters. Working pressure :  2.5 to 3.5 bars. Full circle

    By Rolland Sprinklers based in Mognard, FRANCE. from Sprinklers Product line

  • Model 8 - Low Precipitation Under Tree Sprinkler

    Brass body and nozzles. 1/2' male threaded inlet. Trajectory angle : 8°(8CA8) or 11° (8CA11). Front nozzle from Ø2.5 to Ø3.5 mm. Discharge from 0.35 to 0.90 m³/h. Radius from 7.0 to 9.7 meters. Working pressure :  2.0 to 4.0 bars. Full circle

    By Rolland Sprinklers based in Mognard, FRANCE. from Sprinklers Product line

  • Model 6 - Under Tree Irrigation Low Discharge Sprinklers

    1/2' male threaded inlet. Trajectory angle : 7° or 16°. Front nozzle from 015 to 2.5 mm. Discharge from 0.12 to 0.39 m3/h. Radius from 5.8 to 9.0 meters. Working pressure :  2.5 to 3.5 bars. Full circle

    By Rolland Sprinklers based in Mognard, FRANCE. from Sprinklers Product line

  • Arbre a Vent - Rotor Magnet Assembly Technology

    Each leaf on the tree produces electricity from the slightest waft of air within a radius of 360°. It offers immediate consumption in proximity to end-use, while providing an esthetic, emotional contribution to urban landscapes.

    By Newwind based in Paris, FRANCE.

  • Vent - Rotor Magnet Assembly Technology

    Each leaf on the tree produces electricity from the slightest waft of air within a radius of 360°. It offers immediate consumption in proximity to end-use, while providing an esthetic, emotional contribution to urban landscapes.

    By Newwind based in Paris, FRANCE.

  • Drip Irrigation

    Ideal for shrub plantings, trees, containers and flower beds. Full and half circle patterns available. Adjust flow and radius by turning outer cap. Includes a stake and 1/4' fitting for easy connection. Available in full and half circle pattern.

    By OK Electrical Industry (OK Tube Well) based in Lahore, PAKISTAN.

  • Model 2050 - Self Propelled Harvesters

    Height of only 1190 mm for easy operation in small spaces without damaging the branches. Very tight turning radius permitting to turn around the tree in half the space needed by a machine with front steering and trailer.

    By Monchiero & C. Snc based in Pollenzo di Bra (CN), ITALY. from Fruit Harvesters- Self-Propelled Harvesters Product line

  • Hypro - Model 765 - Delimbing and Debarking Tractor Processor

    HYPRO 765 is a delimbing and debarking tractor processor with crane. It is mounted on the three-point-linkage of a tractor. The crane has a total reach of 7 meters and both the crane and the processor have a remarkable working radius of 280°, which allows felling on both sides. The lateral movement provide generous adjustment to suit the ...

    By Hypro AB based in Lönsboda, SWEDEN. from Eucalyptus Product line

  • Poulan Pro - Model P46ZX - Zero Turn Mowers

    Zero-turn mowers have a zero-turning radius which means they are designed for 360 degree pin-point turns for cutting closely to typical obstacles like trees, stumps, rocks and fences.  Plus with powerful engines, comfortable controls and large cutting decks - a long afternoon cutting the grass is a thing of the past. 

    By Poulan Pro based in Charlotte, NORTH CAROLINA (USA). from Zero Turn Mowers Product line

  • Citation - Zero Turn Mowers

    You’ve got a big yard, big trees and a big job ahead of you.  It’s time you had a mower that’s up to the task.  The Citation was built for you with the power of a Briggs & Stratton Vanguard engine, a patented suspension system for a comfortable ride and a huge 48- or 52-inch mower deck.  Add a zero-turn radius ...

    By Linndale Equipment based in Wilmington, OHIO (USA). from Simplicity Mowers Product line

  • Model LR50160 - Hydraulic Boom Mower

    3-pt. Hitch Category 2 & 3 standard with quick hitch spacing. Folds behind tractor for compact transport. Cutting capacity up to 4” diameter trees. Flip-up cutting gate. Slopes – up and down grades. Maintains tree lines and hedge rows. 100 degree horizontal working radius. Impressive 20 foot vertical reach with 60”deck. ...

    By Hardee By EVH Manufacturing Company, LLC based in Loris, SOUTH CAROLINA (USA). from Mower Product line

  • Hypro - Model 755 - Tractor Processor

    The HYPRO 755 is a generously equipped tractorprocessor with its own crane, a reach of seven metres and a head, both with a working radius of 280 degrees, allowing felling on both sides. The HYPRO 755 has its own hydraulic system with pump and tank for mounting on the front of the tractor.

    By Hypro AB based in Lönsboda, SWEDEN. from Tractor Processor Product line

  • Nelson Hardie - Model SUPER 40 - 40` Diameter Reinforced Composite Axial Fan Orchard Sprayer

    NELSON HARDIE® Super 40 engine-drive air-blast sprayer provides exceptional coverage in medium-height trees such as pistachios and almonds, taller trees like hedge-row walnuts and crops with heavy foliage, like citrus.

    By Nelson Mfg. Co., Inc. based in Yuba, CALIFORNIA (USA). from Air Blast Orchard Sprayers Product line

  • Haglöf DME 201 Cruiser

    The Forestor DME 201 uses ultrasonic pulses to determine distance, allowing you to walk 360° around the transponder and receive accurate measurements at the push of a button. Ideal for taking plot radius measurements, the DME is accurate even through thick underbrush and won’t miss borderline trees. The DME 201 can measure distance in English or ...

    By Forestry Suppliers, Inc. based in Jackson, MISSISSIPPI (USA). from Rangefinders/Distance Measurers (Laser) Product line

  • Silt Fence - Rotary Offset Plow

    Cat. I and II 3 point hookup pins are standard equipment on the dedicated 3 point hitch attachment. 90 Degree Rear Pivot Swing – The rear pivot can swing 90 degrees either side of center. The rear pivot design provides the tightest turning radius available. Massive 2″ x 8″ pivot pins ensure years of dependable service. 90 Degree ...

    By Silt Fence Plow, Inc. based in Pleasantville, IOWA (USA).

  • Campagnola - Model Golia - Pneumatic Olive Harvester

    The new harvester is called Golia and is the result of the latest researches made by Campagnola. Thanks to its peculiar movement, the rakes move sidewards, each on opposite side and crossing each other, widening the harvesting radius. The 'traditional' rakes are fitted with two kinds of teeth: the long ones are robust, very thin and alternately ...

    By Campagnola S.r.l. based in Zola Predosa BO, ITALY. from Campagnola Pneumatic Harvesting System Product line

  • Model AWS3400 - Nut Sweeper

    GK Machine’s AWS3400 Nut Sweeper is the latest addition to the GK Nut Harvesting Line. It’s designed to handle the wet harvest conditions of the Pacific Northwest, and its high volume blower fan and spout provide plenty of directed power to clear nuts from underneath trees.

    By GK Machine, Inc. based in Donald, OREGON (USA). from Agricultural Equipment Product line

  • Slashbuster - Model XL 330 - Brush Cutter

    Purpose-built for its application, the XL 330 mini excavator brush cutter attachment excels in maintenance brushing. Small in size, it still shares the extra-durable triple-welded construction of our larger brush cutter models. D&M Machine developed the XL 330 brush cutter to meet the special needs of small excavators. Although mulching large ...

    By D&M Machine Division, Inc. based in Montesano, WASHINGTON (USA). from Brush Cutters for Compact & Mini Excavators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you