Only show results available in Virginia? Ok

two-axle slurry tanker Equipment

  • Two-Axle Slurry Tanker

    The two-axle range, offering capacities of between 7,150 and 22,700l, is designed for groups of farmers, large farms and service providers. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • GARANT - Model PT 18.500 Poly - Two-axle Slurry Tankers

    Drawbar suspension, lower hitch with ball button system Scharmüller with a nose weight of 3 t.Rotary piston pump Vogelsang with rotacut 10000 (optional).Parabolic suspension or air suspension in conjunction with original BPW axles up to 60 km/h.Heart-shaped tank up of polyester, support with big wheel salient.Dead load with rotary piston pump ...

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • GARANT - Model 18.500 - Two-axle Slurry Tankers

    Lower hitch with ball button system Scharmüller with a nose weight of 3 or 4 t (optional). Power steering in conjunction with BPW power steering axle GSL, including preparation of the axle for a tyre pressure control unit. Parabolic suspension or air suspension in conjunction with original BPW axles up to 60 km/h. KTL coating instead of ...

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • GARANT - Model VT 14.000 - Two-axle Slurry Tankers

    Compressor Jurop with an air capacity of 11,000 litres. Filling accelerator NW 200 under the tank with the possibility to suck right and left via tee (optional). Original BPW Boogie steering axle unit with square axle 150x150 and brake drum 410x180, up to 60 km/h. Wide angle cardan shaft original Walterscheid with sleeve base lubrication and shear ...

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • GARANT - Model VT 16.700 - Two-axle Slurry Tankers

    4-point preparation at the rear of the tank (optional). Hydraulic great capacity piston gate valve rear. Compact design by diameter of 1,900 mm. Mudguards and underride protection for 40 km/h.

    By Kotte Landtechnik GmbH & Co. KG based in Rieste, GERMANY. from Slurry Technology Product line

  • Conor - Tandem Axle Tankers

    Conor tandem axle tanks are designed and built with strength and safety in mind. The unique chassis design and tandem parabolic suspension keeps the overall height low and gives excellent stability. The high speed parabolic suspension and strong chassis are ideal for travelling at high speed. A large range of wheel options are available to choose ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Tri Axles Slurry Tanker

    The capacity of the tri-axle solutions ranges from 18,500 to 30,000l. These tankers are intended specially for groups of farmers, large farms and contractors. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • Single Axle Slurry Tanker

    This range is designed for users who do not require a large tank capacity. This type of equipment is selected according to two main criteria: short distances (0 to 6km) between the filling and spreading points and a moderate volume of effluents to be used.

    By PICHON S.A. based in Guipavas, FRANCE. from Slurry Tankers Product line

  • PROFI - Model I - Slurry Tanker

    The PROFI I TANKERS have a self-supporting tank chassis with a bottom mounted drawbar. The tandem tankers have a buggy-suspended tandem axle undercarriage. Standard the PROFI I TANKERS are equipped with a 13.500 l/min vacuum pump and can be built with a 12.000 (single axle), 16.000 or 18.000 l (2-axled) tank volume. A dribble bar spreader with a ...

    By Kamps de Wild B.V. based in Zevenaar, NETHERLANDS. from Slurry Tankers Product line

  • MULTIUM - Slurry Tanker

    KAWECO offers agricultural entrepreneurs a solution for silage and slurry transport, all in one trailer. With an exchange system thesuperstructure can be easily changed. The special support legs ensure an easy storage and fast exchange of the superstructure. This makes the machine useful from the early spring until the late fall. The trailers can ...

    By Kamps de Wild B.V. based in Zevenaar, NETHERLANDS. from Slurry Tankers Product line

  • Agronic - Slurry Tanker

    Agronic slurry tankers are made for professional users. Thanks to the unique chassis and tank design the centre of gravity is very low.This make the machine very stable when spreading on hilly ground. Ground clearance is still 40 cm (15.75”)..Placing the tank in front of the axles ensures that there is always sufficient weight on the ...

    By Agronic Oy based in Haapavesi, FINLAND. from Slurry Tankers Product line

  • Conor - Standard Tankers

    The standard range of slurry tanks come in 1100 gallon to 2100 gallon. They come mounted on a rigid drawbar and heavy duty ADR axle with a range of wheel options. Wheel options include 385/65 R22.5, 425/65 R22.5, 1300 x 530 x 508 BN3 and 21.3 R24. The high quality 8000 litre Battioni vacuum pump comes as standard with a secondary trap (with drain ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • MEPROZET - Model PN - 20 / 2 - Slurry Tankers

    CHASSIS: Slurry tanker PN-20/2 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanized tank has internal strengthening rings. Closed rear head with a Ø 420 mm hatch. Sight-glasses are mounted on the front head. COMPRESSOR: As a standard JUROP PN 45M compressor is mounted on the drawbar.

    By MEPROZET Kościan S.A. based in Kościan, POLAND. from Slurry Tankers Product line

  • Conor - Fully Recessed Tankers

    The Conor range of fully recessed LGP tankers are strong and robust and built with the contractor and large producer in mind. Sizes range from 1600 Gallon up to 3000 Gallon and comes with many features as standard such as large 30” rear door, 11000 litre vacuum pump, 20 foot suction hose, full commercial axles with 420 x 180 brakes, LED road ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Conor - Slootsmid Trailing Shoe

    The Conor Slootsmid Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. The tank, the trailing shoe and the axle are integrated as closely as possible which gives excellent balance and maneuverability. The trailing shoe has a fully galvanized body and a powerful hydraulic macerator which ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Tramspread Tanker Booms

    The hydraulic folding TRAMSPREAD Tanker Booms are built to a high quality and are fully galvanised. Attaching booms to most makes of tanker is a simple operation. Mounted by a 4-point fixing to the slurry tanker and a 6' tank outlet, the TRAMSPREAD 6m Dribble/12m Twin spread nozzle Combination Bar is one machine capable of performing two duties. ...

    By Tramspread based in Mendlesham, UNITED KINGDOM. from Slurry Tankers Product line

  • Challenger - Slurry Tanker

    The MAJOR Challenger Tanker is a fresh approach to tandem axle tankers. Using a heavy duty industrial strength bogey axle assembly, the front axle can be lifted by hydraulic control.  This allows the operator to turn tighter corners on the headlands or in the yard and eliminates damage to soil structure, ground conditions and tyres. The ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Alpine - Model 2150ALP-LGP - Slurry Tankers

    The Alpine tanker design is based on the contractor LGP specification, but with a dropped axle to give a low centre of gravity.  This results in less ground pressure than standard axle tankers and minimal ground damage even in wet conditions.  There are three sizes available: 2150, 2300 and 2670 Gallons.  As with all MAJOR tankers, ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Contractor - Model LGP - Slurry Tanker

    The MAJOR LGP Tanker is a robust vehicle designed and manufactured with the larger producer or contractor in mind. The MAJOR LGP Tanker is unique in design, in that the barrel is supported by a separate chassis. The position of the axle relative to the machine length means that a perfect balance is achieved with 80% of the weight running on the ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Model T Series - Slurry Tankers

    All KIRCHNER slurry tankers can be delivered with vacuum-pump, worm type pump, rotary-piston pump or vacuum-centrifugal pump. All tanks are produced in the own work Anzenhof, outside and inside hot galvanized and protected with a colorless coating outside. Construction tankers for all usual means of transporter types or for the assembly on trucks ...

    By KIRCHNER & SÖHNE GMBH based in Statzendorf, AUSTRIA. from Slurry Technology Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you