Refine by
Variable Rate Seed Equipment & Supplies
23 equipment items found
Manufactured by:Stanhay Webb Ltd based inBourne, UNITED KINGDOM
With no chains, sprockets or gearboxes and a host of further functionality not possible with conventional landwheel driven drills, the Nine is a high precision and low maintenance drill where each unit is driven by its own electric motor. This allows infinitely adjustable seed spacing directly from the tractor seat as well as the benefits of section control, guidance and ...
Manufactured by:Veris Technologies, Inc. based inSalina, KANSAS (USA)
Growers, consultants, and suppliers are Veris soil EC mapping to devise management zones, set soil sampling locations, create variable rate seeding prescriptions, better manage nitrogen applications, and improve irrigation prescriptions - just to name a few uses of Veris EC ...
Manufactured by:John Deere based inMoline, ILLINOIS (USA)
The 1770NT Planters are among the most productive and adaptable planters on the market. These planters get you there, get the job done, and then get you to the next field. On the road, the 1770NT planters transport at a narrow 12 feet. Plus, the hydraulic system provides true 'fold and go' operation from the ...
Manufactured by:John Deere based inMoline, ILLINOIS (USA)
The John Deere 1700 Rigid Integral Planter has proven performance and pick-up-and-go mobility so you can get more planting done with ease. This planter continues to have a strong following in conventional and reduced till fields. It has a tough and rugged 7 x 7 inch steel mainframe and numerous features that give you dependability in the field year after ...
Manufactured by:RDS Technology Ltd. based inSTROUD, UNITED KINGDOM
A low cost solution to variable rate control on pneumatic seed ...
Manufactured by:Forward Farming based inWelshpool, AUSTRALIA
The Forward Farming 800 NEW Series Seed Drill brings new and improved seeding technology designed specifically for the small to medium sized farmer. The variable rate 800 Series Seed Drills provide more management options in the ever changing world of agriculture. It will allow you to change the ...
Manufactured by:Simplicity Australia based inDalby, AUSTRALIA
In years gone by when turning was tight your only option was a single axle seeder. This has always meant a portion of weight being transferred forward onto the back on the planting implement. When you need greater capacity but don’t want to weigh down your planter as a result, the Simplicity Castoring Quad Seeder is the ...
Manufactured by:Dale Drills based inMarket Rasen,, UNITED KINGDOM
Spares Kit. Some new tines and coulters fitted recently. This drill is in good condition and has been well looked after. Ideal for high output drilling in all conditions. ...
Manufactured by:John Deere based inMoline, ILLINOIS (USA)
To get the best crop, seed must be planted at the right time, at the right depth, with the right spacing and with the right fertilizer program. That’s why we made the 1770 Planters more flexible – to match the way you ...
Manufactured by:Jordan Engineering based inSudbury, UNITED KINGDOM
As standard it comes fitted with fittings for Cat 1 or 2 linkage mounting, but can be built as a trailed unit for working with ATVs and similar prime movers. There are a choice of coulter types and also a number of metering options. Variable seed rate is controlled from our new Mini-Vari variable speed drive ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 4m Hybrid M4 has a hopper capacity of 1,750l and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. The M4 has a power requirement of 200 ...
Manufactured by:Dale Drills based inMarket Rasen,, UNITED KINGDOM
The MTD has Accord metering units and uses an RDS Artemis control system which can be linked to GPS and is capable of variable seed rate on the ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 5m seed only Evolution drill has a hopper capacity of 1,910 litres and comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped out for the LD lower disturbance set-up. GPS speed sensing, electronically driven metering systems and a 4-channel drill computer are fitted as standard. The M4 has a recommended minimum power requirement of 250 ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
The 3m Hybrid M3F steps up from the M3 with a larger capacity hopper at 2,100 which can be divided 50:50 to apply fertiliser at the same time as drilling, either above the seed or below it. The M3F comes with a full range of rear toolbar and seeding set-up options. The leading tine can also be swapped for the LD lower disturbance set-up, and a drawbar and front toolbar fitted to transform into a ...
by:Echelon Ag based inLoveland, COLORADO (USA)
Precision agriculture is the best way to use information about your farm to improve your use of inputs and get a better return on your investment. The process hinges on two things: farm data and the management of that ...
Manufactured by:Countrywide Industries Pty Ltd based inDubbo, AUSTRALIA
The Countrywide Industries range of Bandseeders and seed boxes have proven to give excellent results with reliability over many years. A bandseeder's ability to sow pasture at the correct depth (1.5 - 2cm) thus increasing the germination is a fact well tested by farmers and the Department of Agriculture for many ...
Manufactured by:Elworthy based inKropyvnytstyi, UKRAINE
The sowing machines of the VEGA 8 PROFI universal seed drill are rotated by electric drives with electronic control and sowing control, which combines ease of maintenance, reliability and accuracy of sowing corn, sunflower and other row crops. The seeding rate is adjusted from the tractor cab by the operator using a ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
Fitted with a 3,500l capacity hopper, the T4 can be split 60:40 for seed and fertiliser. The leading tine set up is fitted as standard with a range of front and rear toolbar and tine and disc options available for every sowing scenario. 200 hp is the recommended power ...
Manufactured by:Claydon Drills/ Claydon Yield-o-Meter Ltd based inWickhambrook, Newmarket, UNITED KINGDOM
Fitted with a 3,500l capacity hopper, the T4.8 can be split 60:40 between seed and fertiliser. The leading tine set-up is fitted as standard with a range of front and rear toolbar and tine and disc options available for every sowing ...
Manufactured by:Trimble based inWestminster, COLORADO (USA)
With Yield Monitoring, you can map and compare the performance of different seed varieties throughout your field. Improve seed selection based on yield data over multiple ...