Vine Equipment In Africa
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
The Ledgard Vine shaper is a specially designed hand held, hydraulic shear unit, Ideal for growers wanting to retain old and valued vines. The vine shaper has the capacity to cut through up to 125 mm of wood using the hydraulic oil from the tractor. The simple yet effective design of the vine shaper means minimal maintenance is ...
-
Manufactured by Infaco s.a.sbased in FRANCE
INFACO's new vine and fruit tree tying machine will be available for sale through the usual distribution network from autumn 2023. The tool is versatile, fast and efficient: it saves a great deal of time compared with conventional manual tying. Full details of the AT1000 will be available shortly. In the meantime, here are its main ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
In the vineyard, the KOBOLD vine puller helps you by pulling out the cut vines and placing them in the row or immediately chopping them. Prepare your vineyard for using the KOBOLD! Right from the first foliage cut, ensure that you have the correct cut and the correct height so that the KOBOLD can be used optimally at the end of the ...
-
Manufactured by Infaco s.a.sbased in FRANCE
The A3M V2.0 is an electrical tying device that makes vine tying easy. This machine is highly versatile for single or double Guyot or bowed vine training. A soft steel wire is used for greater flexibility. Strong enough to hold until harvesting, it is easy to destroy after a year, at pruning time. It is available in several diameters 0.40 - ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
With the TERACTIV DUO, you have the option of cultivating either the entire row or just the area around the vine in a green row. To make this possible, the frame with its flexible tines lifts through at an angle of 75° and the roller folds under. This stabilises the frame when working in the area between vines, as it rests on the grass ...
-
Manufactured by Wagner Pflanzen-Technik GmbHbased in GERMANY
Our waxing devices are featuring the ideal size for the operation by our vine sorting device „REBENMAX“ and for the manual dipping. The device is provided for 4 operators, in case of longer plants for only 2 operators. An electronic thermostat delivers in connection with heat transfer oil and double wall an exact ...
-
Manufactured by Wagner Pflanzen-Technik GmbHbased in GERMANY
2005 the satellite controlled Wagner planting machine „IPS-Drive“ has been introduced into the market. This machine represents until today a revolution with concern to vine technology opening complete new possibilities for plantings and additional works including a measuring accuracy of less than 20 mm. „IPS Drive“: ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
to 2,100 mm are available). The right- or left-side mounted CLEMENS RADIUS SL works carefully and reliably around the plants. The entire row is cultivated quickly and perfectly with just one pass. Your vines will thank ...
-
Manufactured by Wagner Pflanzen-Technik GmbHbased in GERMANY
Our type-series of breaker ploughs starts with the „model M“. Even our smallest device shows superior efficiency and performance with its 100 cm wide share and the hydraulically driven centrifugal valve. The working width is 90 cm and the working depth of about 50 cm. It is used for the clearing of the vines, hedges, shrubs, and ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
A Rugged purpose built cutter bar for summer tipping of both vine and table grapes. The Light duty cutter bar still features Ledgard tried and tested double acting scalloped blade which allows the machine to give the cleanest cut possible. Demanding only 25 litres of oil this machine is ideal for any size tractor. The light duty cutter bar ...
-
Manufactured by Ledgard Pruning Systemsbased in AUSTRALIA
The Ledgard medium duty bar has been especially designed for the vineyard market. Its versatility is proven by its ability to handle pre pruning of vines in winter and trimming during summer. This one stop machine for the vineyard owner has been available in the market place for 20 years and has proven time and time again to work in all ...
-
Manufactured by Wagner Pflanzen-Technik GmbHbased in GERMANY
The “Automatic VI” is a well-proven grafting machine for vines and other softwoods. The current use in the nursery Wagner leads to further improvements of the devices built since 1975 and developed constantly. The “Automatic IV” is distinguished by its clear and slim design, featuring however enough mass for a quite ...
-
Manufactured by Agrofrost NVbased in BELGIUM
of the air is also blown to the side, in order to kill all the weeds close to the trees or ...
-
Manufactured by Gregoirebased in FRANCE
manoeuvring capabilities and great handling. Whatever the work to be performed - harvesting, spraying or vine maintenance - the G8.270 is sure to meet your ...
-
Manufactured by Gregoirebased in FRANCE
Even when used with a low power tractor, the G.Prima is your reliable vine harvesting partner. And in the most difficult working conditions, the G.Prima can be equipped with 630 cc wheel motors. This allows you to manage the hydraulic pressure setting directly from the driver ...
-
Manufactured by Clemens GmbH & Co. KGbased in GERMANY
Solid hexagonal profiled frame, hydraulically or mechanically adjusted. Optimum height guidance by crumbling roller with spindle adjustment. Extension frame for high passage. Compact design for attachment of a rotary harrow or tiller. Machine mount for the hydraulic all-around weeder Radius, for cultivating the soil between ...
-
Manufactured by Gregoirebased in FRANCE
What sets the G3.220 apart is its efficiency under the most difficult conditions thanks to the high power wheel motors combined with the OVERboost transmission booster, which temporarily increases the drive torque. The hydraulic assistance circuit is supplied by a Load Sensing pump (automatic flow management) and guarantees the wheel motors receive constant ...
-
Manufactured by Wagner Pflanzen-Technik GmbHbased in GERMANY
The „Champion“ among the versatile planting machines. The range consists of high quality planting machines, which are able to grow efficiently and accurately (almost) all from 10 cm length. The model family includes Champion Balance, Champion A, Champion B und Champion Kompakt. All are equipped with a hydraulic planting depth adjustment, hydraulic side shift and a circular planting ...
-
Manufactured by Netafim USAbased in USA
Netafim Polyethylene Tubing is made from the highest low density polyethylene resin available. Available in black or white color, multiple diameters and various coil lengths. ...
-
Manufactured by Gregoirebased in FRANCE
The G10.330 is an olive harvesting machine, equipped with a DEUTZ Phase IIIB / T4I 4-cylinder engine developing 156 hp and the AUTOdrive, AUTOspeed and ECOdrive smart management devices to give you an exceptional reduction in consumption whilst complying with the latest environmental standards. Regardless of the working conditions, fully automated power and transmission ensure excellent ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you