Refine by
Vineyard Productivity Equipment & Supplies
39 equipment items found
Manufactured by:ERO GmbH based inNiederkumbd, GERMANY
When the Post Pounder is placed on a post, two concentric weights inside it are set in motion. The post is driven into the ground by a succession of small blows. The weights of the standard ERO Post Pounder are 60 kg, and the heavy-duty version has 90 kg ...
Manufactured by:ERO GmbH based inNiederkumbd, GERMANY
The two contra-rotating rollers of an ERO Leaf Stripper pluck leaves gently from the vines. The valuable grapes remain unharmed. These Leaf Strippers can be used at any time between flowering and harvesting. The parallelogram function, included in the standard equipment, holds the leaf-stripping head so that it is ideally positioned in relation to the foliage at all times. This applies both ...
Manufactured by:ERO GmbH based inNiederkumbd, GERMANY
In trials independent institutes have demonstrated that systematic defoliation of the grape zone is a decisive factor in improving wine quality. Because ERO Defoliators work on the 'suck and cut' principle, when fitted with a grille with 9 bars (70 mm bar spacing), they can be used for thinning inflorescences. When a top cutter is also fitted, the first trimming operation can be carried out at ...
Manufactured by:Valente Srl based inCampodarsego (PD), ITALY
At Valente we have always been focused on the evolution of the market and its needs; each one of our new products is the result of a careful analysis of what the farmer needs, improving what can be improved and creating what is not available ...
Manufactured by:Agrimaster - Demetra S.p.A. based inMolinella, ITALY
Light shredders, suitable for low-potency small tractors, ideal for parks , gardens, sport courses, public green areas and for vineyards ...
Manufactured by:GreenTech Australian based inWingfield, AUSTRALIA
This is the first 2 row tow behind that GreenTech developed. We've sold several hundreds of this great product for vineyard spraying in Australia, NZ and USA. It is available in both 2000L and 4000L tank ...
Manufactured by:Klima based inBlenheim, NEW ZEALAND
KLIMA Sureflex vineyard springs have been developed as a joint effort joint between KLIMA, Strainrite Fencing Systems and Lincoln University. Our goal was to develop a product specifically for our customers using the KLIMA pruning system. We wanted a way to allow the driver the safely pick up the fruiting wires much closer to the end assembly than is currently ...
Manufactured by:Klima based inBlenheim, NEW ZEALAND
KLIMA recommends Strainrite Crimps and Crimping tools for joining your wires when using the KLIMA pruning ...
Manufactured by:Boisselet SAS based inMontagny-Les-Beaune, FRANCE
Compact column option with a 300 mm diameter screw enables working under the trellis wires. The 3-point attachment with its hitching balls mounted on bolts on a 50 mm bracket, which in turn slides into the sleeve attachment of a TAP. It enables the TAP-F PRO to be mounted on the front linkage of a vineyard or orchard ...
Manufactured by:Industrias Belafer S.L. based inFraga, SPAIN
Brush for fruit trees and ...
Manufactured by:Serena Group based inEysines, FRANCE
Fast and easy system of a fixation! Rubber bands with anchors are ideal for the production of cable harnesses or the fixing of labels. Black rubber bands with an anchor are specially designed for use in agriculture and vineyards. ...
Manufactured by:Ben Wye Engineering Pty Ltd based inUraidla, AUSTRALIA
Twin Rotor Drop Centre Slashers are designed V type inter rows , the wings free float and can accurately follow the V contour. They are suited to 40-120hp tractor range and come in 7 different sizes which have the following features. Three piece folded and fully reinforced HU300 grade 4mm or 350 grade 5mm main deck with a easy clean top design. Full length stainless steel hinge pins for ultimate ...
Manufactured by:Spagnolo Engineering based inMildura, AUSTRALIA
Introducing to Australia this coming season in 2018, The Vine Sucker Remover has proven success in the United States of America. It is environmentally friendly and cuts down on the use of chemicals in your ...
Manufactured by:FA.MA. Pruning System Srl based inSailetto di Suzzara (Mantova), ITALY
Vine shoot tipping machine with two functions. Vine shoot tipping machine with exchangeable roll with nylon wire available in two versions: from 6 to 8 mm, perfect for weeding among the vineyards rows. The rolls are composed by our special rubber bands made of an anti-usury material which guarantee a perfect cleaning of vineyard ...
Manufactured by:Car-Gar, S.L. based inValtierra (Navarra), SPAIN
Vineyard pre-pruner at the back. Minimum hydraulic flow of 30 L/min. Attachable to tractors through front end frame. Cutting discs that ensure a clean pruning near the rope; they are located on the lower part of the axis. Telescopic chassis that allows machine configuration for desired height and ...
Manufactured by:Valente Srl based inCampodarsego (PD), ITALY
Espalier is a farming system with a vertical trunk, where a 8-10 buds long branch is trained along row direction. A branch of 1-2 buds is left for following year ...
Manufactured by:Pellenc SA based inPertuis, FRANCE
Available in different versions to suit your needs, the innovative carrier and harvesting head create a new approach to vine growing. They combine productivity, harvest quality, and ease of use. You harvest quickly and well, in total comfort: you are more efficient for longer. And thanks to the PELLENC Multifunction concept, you get the most out of your carrier by using it all ...
Manufactured by:Klima based inBlenheim, NEW ZEALAND
Since 2009, NZ Tube Mills product development engineers have worked closely with winegrowers and viticulturists to develop ECO TRELLIS® steel posts and wire clips. Their research involved intensive testing of steel posts used in New Zealand vineyards to analyse success and failure rates in extreme weather conditions and thus determine a safety range for the ...
Manufactured by:Boisselet SAS based inMontagny-Les-Beaune, FRANCE
The TAP 400 – G12 auger is initially designed to be fitted to the side tool carriers of single-row tractors. It can also be fitted to the front of single-row and 3-row tractors. Its limited size and weight, combined with a hydraulic motor driving a 400 mm auger, give our auger excellent maneuverability in narrow ...
Manufactured by:ERO GmbH based inNiederkumbd, GERMANY
The two-sided EB 490 Leaf Remover with hydraulic width adjustment as standard can operate in rows from 1.20 m to 2.40 m wide. The optional hydraulic height adjustment provides separate control of the height of each stripping head. This enables its use in terraced ...