Vineyard Pruning Equipment Available In Asia & Middle East
-
Manufactured by Car-Gar, S.L.based in SPAIN
Double arm reinforced motor sweeper. Multiple movements depending on models. Hydraulic or manual drive systems, depending on models. Electro-valve kit replaced by controller and joystick, depending on ...
-
Manufactured by Campagnola S.r.l.based in ITALY
PONY PRO is the lightest electric vineyard pruning shear by Campagnola. Its main features are balance, speed (favored by four cutting modes and a short-stroked trigger). Moreover, it is a very handy tool thanks to its slim ergonomic shape and its highly flexible cable. In addition to its forged steel blade group, this electric shear is ...
-
Manufactured by Orizzonti s.r.l.based in ITALY
Pre pruner machine with single blade mowing bar pruning system L. 70 cm. complete with probe and motorised extracting device with mechanical return fitted in front of the cutting bar. Equipped as standard with a 4 motion (3 + on/off motors) hydraulic distributor for the following movements: vertical lift; side extension; pruning kit ...
-
Manufactured by Crendon Machinerybased in AUSTRALIA
Vineyard SADIE (rubber flaps) is available in double and single sided models. It is a vine cane sweeper which clears prunings and debris from under vines, improving hygiene. It also assists in giving clean ground for pre-emergence herbicide ...
-
Manufactured by Crendon Machinerybased in AUSTRALIA
Vineyard SADIE is a pruning and leaf sweeper which clears prunings and debris from under fruit trees and vines, improving vinyard hygiene. It also removes weed clumps to give clean ground for pre-emergence herbicide ...
-
Manufactured by JAGODA JPS Agromachinesbased in POLAND
JAGODA JPS provides a pneumatic shear with a reduced diameter, double-piston, but with an excellent cutting capacity. It is fitted with a techno-polymer body and a highly resistant, forged steel blade group. It is manufactured in different versions, for orchard or for vineyard pruning, and is a vibration- and kickback-effect-free ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
Hydraulic Pruning Shears model TS 65, special for big pruning of ...
-
Manufactured by Campagnola S.r.l.based in ITALY
Practical and handy, COBRA PRO electric shear was developed by Campagnola for pruning vineyards, orchards and ornamental plants. The remarkable cutting capacity and the reduced need for maintenance are among the features that make Cobra Pro the best solution for a targeted and professional ...
-
Manufactured by LIPA SRLbased in ITALY
The universal TLBM shredder is a machine used for crushing small dimensions grass and pruning of vineyards and orchards. The machine is provided with a connecting plug with three points, reason why it can be used with any kind of tractor, both caterpillars and farm ...
-
Manufactured by Saeco Strips Pvt. Ltd.based in INDIA
The use of Yodha Rotary Mulcher India is increasing day by day. The making purpose behind this agriculture mulcher is to save time and money which is the most important for all the farmers. Yodha Mulcher is robust and reliable agriculture implement for mulching of pruned materials, vineyards, grass, bushes, crop residues like wheat, paddy ...
-
Manufactured by Reese Group Ltdbased in NEW ZEALAND
Similar to the 680, but with bigger buckets and bigger chassis for bigger vines with bigger crop loads. Ideal for minimal pruned vines and wider cross ...
-
Manufactured by Spagnolo Engineeringbased in AUSTRALIA
The Mast Mounted Twin Row Green Trimmer topping machine allows for the summer trimming/pruning of ...
-
Manufactured by Nobili S.p.A.based in ITALY
Mulchers suitable for low-power tractors from 35 up to 65 HP. The new series BE 14 – 16 – 18 - 20 combines compact design with a professional concept, underlined by innovative construction solutions and the use of special materials to reduce the weight. For instance the multi-purpose chassis with the possibility to fit a 2-point-fixed headstock or a headstock with hydraulic offset and ...
-
Manufactured by FA.MA. Pruning System Srlbased in ITALY
The Vine running windrowers offers the possibility of picking up runners and pruning waste in only one passage conveying them into the center of the row. Available in two models, Rx150 with one windrower head or RX300 with two windrower heads, with hydraulic or electric control it allows to manage at best the sarments and pruning waste ...
-
Manufactured by KMS Rinklin GmbHbased in GERMANY
Suitable for training canes and cordons. Grapevine pruning is one of the most important, but also time-consuming, tasks. Because, in addition to removing the annual wood, the canes for the new year must also be selected and truncated. Pre-trimmers from KMS Rinklin are constructed with a modular system and can therefore be adapted to the ...
-
Manufactured by Binger Seilzug GmbH & Co. KGbased in GERMANY
. This ensures optimum adaptation of the machine to existing vineyard configurations and training forms. The VSL 07 P is therefore just as suitable for cordon-trained as for cane-pruned vines. Its low weight makes the VSL 07 P suitable for use on steep slopes and in difficult terrain. The VSL 07 P is available with cutting lengths from 21 cm (2 x 4 cm) to 77 ...
-
Manufactured by Spagnolo Engineeringbased in AUSTRALIA
The very 1st Vine pruning machine designed and patented by Spagnolo Engineeering. This machine is designed to pre-prune, prune and green trim grape vines. Its versatility allows pruning of vines trained under different trellising ...
-
Manufactured by KMS Rinklin GmbHbased in GERMANY
Suitable for training single and double canes. Grapevine pruning is one of the most important, but also time-consuming, tasks. Because, in addition to removing the annual wood, the canes for the new year must also be selected and truncated. Pre-trimmers from KMS Rinklin are constructed with a modular system and can therefore be ...
-
Manufactured by Nobili S.p.A.based in ITALY
Multi-purpose mulchers with interchangeable knives particularly suitable for crushing vine-shoots, kiwi-cuttings, grass and pruning residues. The mulchers VK 95 - 115 - 135 and 155 are provided with adjustable coupling and gearbox with overrunning clutch. Thanks to their low power requirement and compact size, these machines can be used also ...
-
Manufactured by Gramegna s.r.l.based in ITALY
Maximum performance for crushing pruning wood, vine-shoots and grass. The T3D is designed to satisfy the most demanding customers (large farms and contractors). It is equipped with a thick shell and an electronically balanced 210 mm rotor able to crush grass and pruning wood up to 4-5 cm, with a good working speed even in difficult ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you