Water To Root Equipment In Asia & Middle East
-
Manufactured by 20 Microns Mineral FertIizerbased in INDIA
Humicrons is a concentrated water-soluble liquid organic root stimulator and soil activator. Rich in organic matter, it greatly improves the physiochemical properties of the soil and the microbial activities in the soil. Application of Humicrons results in higher yields, better product quality, massive root system, positive ecological ...
-
Manufactured by Horticultural Alliance, Inc.based in USA
Horta-Sorb water management gel polymers are substances that absorb hundreds of times their weight in water. The water absorbed is nearly all available to the plants. Gel use results in managing watering in the root zone of the plant, significantly reducing watering maintenance and providing for ...
-
Manufactured by Suzhou Seapeak Co., Ltd. | Irrigation Hosesbased in CHINA
Drip tape with flat dripper : flat drip tape uses plastic hose to send water to the roots of crops for local irrigation through drippers on a capillary with a diameter of about 16mm. It is through the dripper or drip irrigation tape that the outflow orifice is very small, and the water is dropped uniformly and slowly into the soil near the ...
-
Manufactured by Horticultural Alliance, Inc.based in USA
DIEHARD BioRush is used as a maintenance product for green up. It is a dry, water-soluble root growth stimulant with nitrogen fixing, phosphorus solubilizing and growth promoting beneficial bacteria packaged in pre-measured, labeled bags for easy use with tank sprayers. Product Features: Soluble product used as a foliar spray to ...
-
Manufactured by Hunter Industriesbased in USA
. The ET System will calculate irrigation schedules to replenish only the water that is actually needed for plant and soil conditions. The Hunter WiltGard™ technology can intervene to trigger protective watering when extreme conditions threaten vegetation. The result is a dramatic savings in water, healthier root zones, and ...
-
Manufactured by Tavlit Plastic Ltd.based in ISRAEL
An innovative series of emitters specifically designed for irrigation of young plants of oil palm trees and other trees planted in large spacing. The emitters throw a jet of water directly into the root zone , thus eliminating the waste of water. The product is available in three configurations ...
-
Manufactured by Terraflex Industries LTDbased in ISRAEL
Garden Hose (Soaker Hose); No runoff. No water wasted. Waters directly to the roots. Before the invention of the soaker hose, overhead sprinklers were the main type of irrigation device, but they created puddles and erosion problems. The soaker hose changed this by slowly dripping beads of water through pores along the length of ...
-
Manufactured by Beijing Eco-mind Technology Co., Ltdbased in CHINA
LK-350 plant root box is a feasible means to separate inter-root soil from non-root soil and to study soil pore water, root interaction,etc. Plants are planted in a transparent root box on one side and the root box is placed at an inclined angle on a fixed-angle stand. Plant ...
-
Manufactured by Driptech India Pvt Ltd - Jain Irrigation Systems Ltdbased in INDIA
Drip irrigation uses tubing to deliver a small volume of water directly to the roots of the plants being cultivated. This uses the bare minimum amount of water necessary to grow a full, healthy crop. Drip irrigation is widely regarded as the most efficient method of watering certain crops. It can take as little as one third of ...
-
Manufactured by Polydime International (Pvt) Ltd.based in SRI LANKA
Drip Irrigations systems are the latest technology available to irrigate both simple and complexed plantations efficiently. The basic philosophy of Drip Systems are to deliver the required amount of water direct to the root of a plant with zero losses. The use of Drip Irrigation systems assure the higher water management efficiency and the ...
-
Manufactured by Neptune Plastic Industriesbased in INDIA
Cylindrical Drip tubing is used in the delivery of water directly to the roots of plants. Specifically, drip tubing is made from polyethylene and has emitters that are placed at intervals along the tube that correspond with the placement of each plant. This ensures that water is delivered directly to each plant's root zone. ...
-
Manufactured by Shree Nainar Oil Mills Pvt. Ltdbased in INDIA
Nitrogen, phosphorus, and potassium are three vital nutrients for growth and nourishment in plants. Nitrogen is a key element in chlorophyll, phosphorous is found in every cell, and potassium is necessary for the conduit of essential nutrients and water from the root to the leaves. Therefore, a potent organic fertilizer ought to revitalize ...
-
based in TAIWAN
is water. Therefore, by removing soil from the equation and delivering water directly to the roots, growth can be more efficient. The problem with hydroponics is that bacteria grow in the water, and while some bacteria can be good for plant health, other bacteria can be bad. At YesHealth Group, we studied the affects of ...
-
Manufactured by Southern Agro Engine Private Limitedbased in INDIA
is irrigated just enough to saturate the soil with moisture. Subsequent irrigation is suggested after soil forming fine cracks. The irrigation interval depends on the soil type and weather condition. This kind of water management avoids root degeneration in rice plant, increases microbial activity in the soil making the nutrients easily available to ...
-
Manufactured by Southern Agro Engine Private Limitedbased in INDIA
is irrigated just enough to saturate the soil with moisture. Subsequent irrigation is suggested after soil forming fine cracks. The irrigation interval depends on the soil type and weather condition. This kind of water management avoids root degeneration in rice plant, increases microbial activity in the soil making the nutrients easily available to ...
-
Manufactured by Yibiyuan Water-saving Irrigation Technology Co., Ltdbased in CHINA
Micro Irrigation can deliver water to plant roots through constant flow of flow stabilizer to achieve irrigation effect. In agriculture, because the plants are evenly arranged, the varieties are the same, and the water demand is the same, there is no need to consider the difference in water demand. Therefore, after knowing the ...
-
Manufactured by Southern Agro Engine Private Limitedbased in INDIA
is irrigated just enough to saturate the soil with moisture. Subsequent irrigation is suggested after soil forming fine cracks. The irrigation interval depends on the soil type and weather condition. This kind of water management avoids root degeneration in rice plant, increases microbial activity in the soil making the nutrients easily available to ...
-
Manufactured by Foshan GrowSpec BioTech Co.,Ltd.based in CHINA
An aeroponic grow system is a method of growing plants in which the roots are suspended in air and are misted with a nutrient-rich water solution. The plants are usually placed in a bucket or trays with a timer or pump that sprays water and nutrients to the roots. The system allows for a highly efficient use of ...
-
Manufactured by Captain Polyplast Ltd.based in INDIA
What is drip irrigation? Drip irrigation is a system designed to deliver water and and nutrients to crops in the most efficient manner. The system essentially applies water and nutrients directly to the root zone of the plants to improve effectiveness. Thus, drip irrigation is the most advanced technology available to farmer for achieving ...
-
Manufactured by Kanok Products Co., Ltd.based in THAILAND
Low water consumption and water savingwhen compared to other systems. Water drop straight at the root of the plant, help to reduce quantity of weed. No need to use high pressure water pump connect with the water tank which set up on higher level. It has still enough water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you