Only show results available in Virginia? Ok

weed control cost Equipment

  • Inter Row Cultivator

    The Edwards Inter Row Cultivator has been designed for use by growers both large and small for cost effective inter row weed control. It is easily adapted for use in many different crops and soil conditions. The cultivator can be made in any width to suit your requirements.

    By Edwards Farm Machinery Ltd based in Tenbury Wells, UNITED KINGDOM. from Weed Control Product line

  • Undavina - Sprayheads

    For applying herbicides to provide a weed free strip in row crops such as vines. Supplied in 250mm, 400mm, 600mm and 900mm sizes to suit the row spacing and treatment width required.  A 250mm size is also available to special order when very narrow row widths are used. The Undavina provides efficient control of weeds around the base of vines ...

    By PURIVOX Saat- und Ernteschutzgeräte GmbH based in Ottersheim, GERMANY. from Weed Control Product line

  • Orcharding

    The flame weeding technique may be applied using different methods and with different types of equipment depending on the problems to be tackled in orchards, vineyards or kiwi groves. Operation modes and speed, and therefore costs of the execution, depend on how much weed has grown and spread and the type of operation to be implemented.

    By Officine Mingozzi based in Bando di Argenta, ITALY. from Flame Weeding Product line

  • Model MS1 - Multi Spray Machine

    The Steketee Multispray is specially developed for weed control in all row crops. This method enables applying Round-Up on crops. The Multispray is best mounted on the tractor front in combination with the Steketee Front Linkage Device. The Multispray consists of a bearer with two furrow wheels and drawbar points for mounting on the front

    By Machinefabriek Steketee BV based in LA Stad a/h Haringvliet, NETHERLANDS. from Chemical Weeding Product line

  • CombCut - Weed Cutter

    CombCut available in working widths 6 and 8 m, model 6004 respectively 8002. High work rate – can be used at speeds of around 10 km/h. Low draught requirement. Light, wheeled and non-invasive. Low investment cost. Not dependent on weather. Uncomlicated mechanical technology. High reliability and inexpensive spare parts.

    By Just Common Sense AB based in Karlskrona, SWEDEN.

  • Logic - Model Contact 2000 CTF - Weed Wiper

    1.5m and 2.5m versions available. Offset drawbar. Chemical control system. Contra-rotating chemical brush. Only targeted weeds treated. Saves on chemical costs compared with chemical spraying. Ensures excellent coverage of weeds with chemical.

    By Logic based in Hexham, UNITED KINGDOM. from Agriculture Product line

  • John Deere - Model ExactApply - Nozzle Control System

    Spray droplet size is key to effective coverage and precision. It has to be consistent. It has to fit the crop. It has to applied at the right rate and pressure. Now you can choose the right droplet size for your application with ExactApply. The right drops for the right crops. With individual nozzle control, ExactApply delivers the precision at ...

    By John Deere based in Moline, ILLINOIS (USA).

  • DURATION - Model CR - Controlled Release Fertilizer

    DURATION CR controlled-release fertilizer relies on a patented and durable polymer-coated technology to gradually and efficiently release nutrients. The result is the consistent metering of nutrition that lasts for weeks, even months, with fewer applications. This consistency helps to take the worry out of maintaining healthy turfgrass and plants ...

    By Koch Agronomic Services, LLC based in Wichita, KANSAS (USA). from Landscape Management Product line

  • TrashMaster - Rod Weeder

    Rotary rod weeders were initially developed to control weeds in summerfallow. Their design is highly effective: square rods rotating in a reverse direction forcing weeds upward to the ground surface.

    By J.E. Love Company based in Garfield, WASHINGTON (USA). from Calkins Tillage Equipment Product line

  • Culta - Model CW - Rotary Rod Weeders

    Rotary rod weeders were initially developed to control weeds in summerfallow. Their design is highly effective: square rods rotating in a reverse direction forcing weeds upward to the ground surface.

    By J.E. Love Company based in Garfield, WASHINGTON (USA). from Calkins Tillage Equipment Product line

  • Bataleur Gold

    Description: BG is a pre-emergence weed killer you can use to get rid of weeds in your crop Your crop faces all sorts of threats when you establish it. One of the major threats to your crop...and your yield is an invasion by weeds.

    By ZFC Limited based in Workington, ZIMBABWE.

  • Herbicide Tolerance

    According the the ISAAA, In 2013 alone, herbicide tolerant crops occupied 99.4 million hectares, or 57% of the 175.2 million hectares of biotech crops planted globally. For the first 17 years of commercialization (1996 to 2012), benefits from herbicide tolerant crops were valued at $47.7 billion. Weed control can often be the most expensive cost ...

    By Arcadia Biosciences, Inc. based in Davis, CALIFORNIA (USA).

  • WeedSeeker

    With the Homburg WeedSeeker, you can save up to 90% on the cost of weed killers. Thanks to the fully automatic seek & spray system, the WeedSeeker sprays the weed only and leaves the soil undisturbed. The seek & spray system consists of an infrared weed sensor linked to the dosed controls of the spray nozzle. The benefits of this system ...

    By Homburg Holland based in BM Stiens, NETHERLANDS.

  • Kelly Engineering - Disc Mulch Chain

    An innovation unique to Kelly Engineering is our Disc Mulching range of Chains. Designed initially for managing stubble residue, the disc chains are now used for everything from primary tillage to planting poppies. The mulching chains are used with the primary aim of returning crop residue to the soil. They roll down stubble and chop and split it ...

    By Larwoods Ag Services based in Kadina, AUSTRALIA.

  • Topper

    Abbey toppers are ideal for paddock topping or weed control keeping pasture fresh and meeting all the requirements of cutting and maintenance. Abbey has the most comprehensive range of topping equipment in the marketplace.

    By Abbey Machinery Ltd. based in Nenagh, IRELAND. from Grassland Product line

  • Sugar-Beet Harvester

    Durable Quick Set, Adjustable Row Modules with Dual Gauge Wheel Depth Control. With the Sugar Beet Manager, each row can be independently set to thin, aerate, block & weed in the row.

    By Pickett Equipment based in Burley, IDAHO (USA).

  • TIREX - Model TX 300 - Cultivator

    TIREX , the best way to ensure the success of your next crop.Significantly higher yields.Controlled weed eradication.Systematic reduction of soil preparation.A simple and compact design, for an intelligent alternative to ploughing

    By Religieux-Frères based in Vigneux-Hocquet, FRANCE. from Rear Mounted Machinery Product line

  • Pattern Imprinted Concrete

    Impressed concrete: The facts our paving system is a Fully proven product: Permanent texture & co louring, Cost effective & rapid installation, Weed free, Oil & stain resistant, Minimal maintenance, Fully insured, No Sinkage.

    By easydriveway based in Wigan, UNITED KINGDOM.

  • Parmiter - Spring Harrow

    The Parmiter Spring Harrow has been developed as a simple dual purpose tool for pasture maintenance and cereal weeding. It is the most versatile cost effective machine that you will ever own!

    By Shelbourne Reynolds Engineering Ltd based in Bury St Edmunds, UNITED KINGDOM. from Groundcare Product line

  • Triple-Hoe

    The KRESS-Triplehoe is designed for accurate weeding even at large working widths. This is realized by the optoelectronic system called Autopilot from KRESS.The plant row is seen by a camera and the collected data are analyzed in a computer, which controls directly the hydraulic stearing. Because every bed is controled seperately, the common bed ...

    By Kress Umweltschonende Landtechnik GmbH (K.U.L.T.) based in Vaihingen / Enz, GERMANY. from Mechanical Hoes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you