Only show results in Virginia? Ok

weed cutter Equipment

  • Model AVG 120 - AVG 150 - AVG 200 - Weed cutter

    Height adjustment using extensors with possibility of placing hydraulic cylinder of remote control. Single piece casing of steel sheet. Frame extra-reinforced, integrated to the casing. Compensation parallelogram of the spear hitch. Coupling cardan with clutch. Cardan movements protection and clutch to prevent accidents. Cut minimum of 30 mm. up ...

    By Grosspal - Vialcam S.A. based in Las Varillas, ARGENTINA.

  • CombCut - Weed Cutter

    CombCut available in working widths 6 and 8 m, model 6004 respectively 8002. High work rate – can be used at speeds of around 10 km/h. Low draught requirement. Light, wheeled and non-invasive. Low investment cost. Not dependent on weather. Uncomlicated mechanical technology. High reliability and inexpensive spare parts.

    By Just Common Sense AB based in Karlskrona, SWEDEN.

  • Weed Cutters

    For exceptional aquatic plant management challenges we offer specialized weed cutting machines. Often used in conjunction with conventional Harvesters, these heavy duty cutters are designed to remediate the most severe aquatic plant infestations.

    By Aquarius Systems based in North Prairie, WISCONSIN (USA).

  • Articulated weed cutter

    CHASSIS: Built in SAE 1010 steel of 5 y 6 mm. thick, with transverse and longitudinal nerves welded electrically in controlled atmosphere with MAG-MIG system. Lateral and articulated wings allow to copy the land blemishes up to 20 degrees up or below. TRANSMISSION: Cardan with safeguard, bevel gear case chrome-nickel steel forged, carved, ...

    By Grosspal - Vialcam S.A. based in Las Varillas, ARGENTINA.

  • Model M10 - Brush Cutter

    HP requirements 150 to 200. Rubber Tires. M Series of Cutters are designed for clearing brush that will be converted into improved pasture, or strip chopping for wildlife improvement. Works great in palmetto as well as mesquite.

    By Marden Industries based in Punta Gorda, FLORIDA (USA). from Brush Cutters and Weed Cutters Product line

  • Cutter

    BASE MACHINE: additional hydraulic lateral movement (2 quick fluid intake couplings), hoe-holder head hydraulically inclinable in high! (2 quick Huid intake couplings), 1100 mm splined P.t.o. shaft, manual emergency recall steel wire lever - double support mechanical power lift.USE: uprooting weeds around tree trunks, also suitable for orchards ...

    By Calderoni based in Forli, ITALY. from Cutters Product line

  • Doro - Model Klippo - Cutter

    This is the mid sized machine. Klippo is completely operable from the driver’s seat, including cutting depth and the action of the knives. The knife can also be placed diagonally for cutting in carpet vegetation and close to land. Klippo is equipped with a stone release system and has an adjustable frame for different boat widths. The ...

    By Dorotea Mekaniska AB based in Dorotea, SWEDEN. from Doro Cutters Product line

  • Model SE6, SE7, and SE8 - Medium Duty Rotary Cutter

    The economical SE6, SE7, and SE8 have the features to handle mowing chores including pasture clipping, weed and grass mowing, and cutting material up to 1' in diameter.  All three models are designed for use on 540 RPM tractors and feature a rugged three-point lift type hitch.  The SE8 is also available with a pull or semi-mount hitch.

    By Tricorp Inc based in Palm Beach, FLORIDA (USA). from Rotary Cutters Product line

  • Model FX-318 - Rotary Cutter

    Schulte's first 18’ Flex Wing mower. An ultra narrow transport width makes moving this unit extremely safe and simple. Run with the same HP tractor as most 15’ flex wings, but gain the extra 3’ cutting width. Excellent choice for mowing crop residue, pastures, weeds, orchards and roadsides. Single 7 gauge domed deck sheds water ...

    By Schulte Industries Ltd. based in Englefeld, SASKATCHEWAN (CANADA). from Rotary Cutters Product line

  • Model SE42 - Regular Duty Rotary Mower

    The economical SE42 rotary mower from Servis-Rhino mows a 42' swath of grass, weeds, or material up to 1 ' in diameter.The SE42's sturdy, compact design delivers a low cost method of mowing in confined areas.  Designed for use on 540 RPM, CAT I tractors with a minimum of 15 horsepower, the SE42 features a reinforced 11 gauge deck and Cat 3 ...

    By Tricorp Inc based in Palm Beach, FLORIDA (USA). from Rotary Cutters Product line

  • Razorback - Model BH4,BH5, BH6 - Rotary Cutters

    The Razorback-Series has Bush Hog’s® legendary durability and reliability built into each of the three models. Ideal for weeds, grass, and up to 1-inch diameter brush, these models are economically priced for use around estates and small farms. The price and value of the Razorback Series units once again prove that nothing beats a Bush ...

    By Bush Hog based in Selma, ALABAMA (USA). from Rotary Cutters & Crop Shredders Product line

  • Bush Hog - Model BH10 - Single-Spindle Rotary Cutters

    Grass, weeds, and small brush are no match for these authentic Bush Hog built cutters. Available in 5-feet, 6-feet, and 7-feet cutting widths, the BH10 Series Rotary Cutters are designed to deliver superior performance in tough conditions, day after day, year after year. Nothing Beats a Bush Hog! Bush Hog brand rotary cutters are famous for their ...

    By Bush Hog based in Selma, ALABAMA (USA). from Rotary Cutters & Crop Shredders Product line

  • Marunaka - Brush Cutter

    We are manufacturer,supplier of Brushcutters in delhi.we are exporting brush cutter to our clients.Brush cutter is a portable yet very versitile machine which is useful for removel of unwanted weeds, mowing of lawns and also for harvesting of crops.Various models are available to suit specific needs of the customer.There are various attachments ...

    By SQPL Group based in Noida, INDIA.

  • Rhino - Model 100 SERIES - Medium Duty Single Spindle Utility Rotary Mowers

    Rhino 100 Series cutters...simple operation, fresh styling, highest value!. Great value, simple to use, lasting durability and smart design describe the new 100 Series rotary cutters from Rhino®. Especially designed for utility mowing operations including small ranches, estates and farms with applications that include mowing grass, weeds or ...

    By Rhino - a registered trademark of the Alamo Group Inc. based in Gibson City, ILLINOIS (USA). from Rotary Cutters -Single Spindle Product line

  • CombCut - Weed Management System

    CombCut is developed for weeding coarse weeds in crops like cereals, corn, native prairie and seeded grassland. But You can also use CombCut weeding some vegetable crops like beans, onions and carrots. If you don’t want (or cant) to use herbicides CombCut would be your choice. Even if our machine is developed for organic production it will ...

    By Just Common Sense AB based in Karlskrona, SWEDEN.

  • Land Prid - Model RCR15 Series - Rotary Cutters

    Land Pride’s RCR15 Series Rotary Cutters are ideal for clearing grass, weeds and light brush. These cutters offer fast, clean, dependable mowing and have been extensively tested to ensure operating safety. High blade tip speeds assure a clean cut in a variety of field conditions. The standard stump jumper slides over stumps, rocks and debris ...

    By St. John Hardware & Implement based in Airway Heights, WASHINGTON (USA).

  • Brush Cutters

    T&H Power Products are the specialist supplier of many leading brush cutter brands including Stihl, Mitox, Ryobi, Hitachi and many more. We sell a large range of petrol and electic brush cutters for domestic or commercial use. Brushcutters are suitable for cutting back weeds and thick scrub. Brush cutters are usually fitted with a metal blade ...

    By T&H Power Products Ltd based in Ormskirk Lancashire, UNITED KINGDOM.

  • Model FF - Rotovator Acquatic Cutter

    Acquatic special rotovator cutter, for clearing the bottom of watercourse, with flow water, where it need to cut grass, weed, and mill the depth. Very important is the cleaning from the sediment and mud.

    By O.S.M.A snc based in Scannabue (CR), ITALY. from Attachments Product line

  • Little Wonde - Hydro Brush Cutter

    The Little Wonder Hydro Brush Cutter navigates through weeds, heavy brush and overgrown vegetation with ease. Tempered spring steel 26” blade cuts tall weeds, brush, and saplings up to 2” thick. Our welded steel frame design and engine positioning provide excellent balance regardless the terrain. And unlike the competition, our ...

    By Lexington Outdoor Power Equipment based in Lexington, KENTUCKY (USA).

  • Little Wonder - Hydro Brush Cutter

    The New Little Wonder Hydro Brush Cutter navigates through weeds, heavy brush and overgrown vegetation with ease. Our welded steel frame design and engine positioning provide excellent balance regardless the terrain. And unlike the competition, our hydrostatic transmission offers infinitely-variable, clutch-less speed selection – up to 4.2 ...

    By Major League Power Equipment based in East Setauket , NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you