Model KKF 800/1000/1200-2K-U - Drag Chain Conveyors
Drag chain conveyors have an endless chain with carriers (cross ribs) which runs in a closed trough. This makes them suitable for transporting bulk materials. Depending on the design of the carriers and trough, material can be conveyed horizontally, on an incline or vertically. Bends can be installed allowing different conveyor sections to be combined.
This makes them particularly suitable for use as discharge or distribution conveyors. Material can be conveyed in the lower run as well as the upper run.
The KKF 800/1000/1200-2K-U drag chain conveyor transports the material in the lower belt. The engineering design is exactly the same as the 400/500/600-1K-U, but with two chains. Furthermore, this is an affordable conveyor that features two internal conveyor chains. Main area of application: Chip conveyors in sawmills. Trough widths of 800 mm, 1,000 mm and 1,200 mm are available.
Chain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material.
This version of Vecoplan-chain conveyors transports the material in the lower run by means of two inside conveying chains with 11.2 t, 16 t or 22.4 t breaking load. The chains run in the return on low-wear chain guide rails and are additionally covered in the feeding area so that no material can get into the chain.
By use of upper and lower elbows the course of chain conveyors is almost on choice. Motorical or pneumatical slides allow additional user-defined discharge positions.