Harvester Concepts Ltd.

- Model HT - Motorized Trimmer Cuts

0

The HT - Kuma’s motorized trimmer cuts the crop at either a floating or preset height, and a ground driven conveyor transports it upwards and into a bin. General trimming: pruning crops or shrubs to height. Herb harvesting: will straddle the row, cutting the crop to a uniform height and place the trimmings into a bin. Taking cuttings: cut and collect cuttings from beds ready for pricking out. Clean-up: cutting rank grass or collecting up surplus vegetation.

  • Standard cutting width is 800 mm

  • Adjustable fingers pick up the crop from the sides of the row and feed it over the cutter bar to ensure all the crop is cut.

  • Adjustable wheel track, from 1250 mm up to 1500 mm (typical tractor wheel track). The HT - Kuma will straddle the crop and the operator can also walk in a wheel track. Hence no plant damage occurs allowing a second crop to grow.

  • Adjustable wheel height allows for raised beds. Cutter bar height above wheel ground level 40 to 400 mm. If a higher cutting height is required momentarily or to stop cutting plants, simply press down on the handle bars to lift the cutter bar.

  • Operator controls / handlebars fully adjustable. The operator can walk directly behind the harvester or walk offset in a wheel track. The adjustment allows the controls to be set to best advantage for the operator. Throttle and engine stop are activated from the operators position.

  • Conveyor belt is a heavy duty horticultural type which can easily be cleaned. It is ground driven in the forward direction but freewheels when reversing. When shifting the harvester over long distances, pull it along so the conveyor freewheels.

  • Frame is fully zinc plated for low maintenance. Wheels have quick release pins allowing compact storage or easy transporting in a vehicle.

  • Cutting height (cutter bar above wheel ground level): 40-400 mm

  • Cutting width: 800 mm

  • Wheel track: 1000 / 1125 mm

  • Wheel drive: none

  • Belt speed: relative to ground speed

  • Weight, dry: 35 kg

  • Collecting bin / bag: recrate 47 or 75 bins

  • Dimensions:

    • Ready to use: width = 1390 mm / length = 2350 mm (over wheels & control handle)

    • For Freighting (on pallet): approx. 1.83 cu.m / approx. 120 kg

  • Engine:

    • Husqvarna Zenoah G23LH-EZ (used to be Komatsu Zenoah) 22.5cc air cooled 2-stroke gasoline engine

    • Fuel / oil mix 25:1

Customer reviews

No reviews were found for Kuma - Model HT - Motorized Trimmer Cuts. Be the first to review!