Agricultural Industry Equipment In Argentina
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The ML3 ThetaKit provides researchers with a portable tool for highly accurate, near instantaneous measurement of moisture levels in soils and substrates. The ThetaKit is easy to use. Simply switch the connected HH2 Moisture Meter on, insert the probe pins fully into the soil, and press the HH2’s “read” button to display the moisture measurement. Readings can then be stored with ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
MeMo sample pot, inclusive closing ring, contents ca. 0.8 l, colour green, makes up together with MeMo-cap and closing ring a fraud-proof packaging, re-usable, box of 132 pieces, with unique bar- and numerical ...
-
PremiumManufactured by AMS, Inc.based in USA
Two different styles to choose from. Soil ejectors help you remove samples from your probe with ease and keep your fingers clean! The old style ejectors snap inside the slot of the probe and slide up as the sample enters the probe. They are fixed ejectors and are meant to stay inside of the slot of the probe for subsequent use. (*Only available for 7/8” soil probes). The new style ejectors ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2-3/4" X 3' One-Piece Combination Edelman Auger is capable of augering down to 3'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Automatic, fraud-proof sampling chamber for liquid ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the Rhizon soil moisture sampler we supply a range of miniature soil moisture samplers. The Rhizon samplers are used for repeated and reliable sampling of all dissolved components in the soil solution. The porous plastic material (PES) wets spontaneously and has standard 0.15 micron pores. The samplers are supplied with coextruded tubing (PE inside / PVC outside) 1 mm internal diameter, luer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Eijkelkamp Smart AGR Stackable manure | Hydraulic suspension 250 bar, for truck with semitrailer, complete set consisting of the Smart AGR basic, including app and service subscription, car holder, car charger 12/24 V, case, Smart AGR cabin unit, Smart AGR trailer unit and Smart AGR hydraulic sensor 250 bar (exclusive mounting ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by AMS, Inc.based in USA
Being able to replace the tip of your soil probe is a convenient and economic way to increase the lifespan of your equipment. AMS replaceable tip soil probes are a popular choice among agronomists, soil scientists, environmental consultants, and farmers. AMS offers several different replacement tip options that allow you to sample in a variety of soil conditions more efficiently. You can increase ...
-
PremiumManufactured by AMS, Inc.based in USA
Hay Probe Liner ...
-
PremiumManufactured by AMS, Inc.based in USA
Open End Soil Probes collect shallow samples that are 15” in length. They are primarily used for agricultural applications. The Soil Probe body is made from nickel-plated chromoly. The 15" slot in the Soil Probe is cut to the end of the probe body to facilitate emptying of the sample. It includes a 10" Cross ...
-
PremiumManufactured by AMS, Inc.based in USA
Plastic, stainless steel, brass, or aluminum! Order liners by diameter, length, and material type. The sizes shown are the retaining cylinder size (i.e. liners are sized by the OD of the liner). The 3/4" and 1" liners are 1 3/4" longer than the described length to accommodate the reach-and-grab soil probe system. Call for special size ...
-
PremiumManufactured by AMS, Inc.based in USA
10" Cross Handle w/ Grips, 5/8" ...
-
PremiumManufactured by AMS, Inc.based in USA
1" X 25-3/4" Plastic Liner. A specially threaded top cap allows the liner to protrude 1-3/4" from the top of the probe body for easy removal without handling or disturbing the sample. The Reach-&-Grab removal system helps improve the integrity of your ...
-
Manufactured by Sistema AZUD, S.A.based in SPAIN
1.- Straight labyrinth pick. 2.- 70º labyrinth pick. 3.- Microtube pick (hydroponics). 4.- Microtube offtake connector. 5.- Extendable multi-outlet ...
-
Manufactured by WAMGROUP S.p.A.based in ITALY
BINSWEEP is a device through which powders or granular materials are discharged from small size bins or hoppers provided there is a low headload. Flanged on the outlet of the bin or hopper, BINSWEEP® has a bottom disc equipped with two rotating arms fixed at its centre. Rubber scrapers are fitted on the lower end of the arms that move the material towards an outlet spout in the bottom plate. ...
-
Manufactured by Boschi Servizi srlbased in ITALY
The grain bagger is a machine that ensures the correct filling of horizontal polyethylene silos. With this machine, the grains that are loaded from above are directed to the silobag. The inner augers in the tunnel permit a better filling of the bag. The machine movement is ensured by the grains pushing against its internal wall. The self-propelled version (IK9 AP) of this grain bagger is equipped ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you