Agricultural Industry Equipment In Chile
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
Manufactured by TimberPro Incbased in USA
40° Lateral Tilt Adapter (Optional 360°). Constructed from Grade 100 Material. 4250 lbs (with 40-deg tilt adapter) . 32“ + (82 cm) Cutting Capacity. 2.0 sqft Accumulation Area. High Speed / Auto-Tension Saw with 3/4” ...
-
Manufactured by Da Ros s.r.l.based in ITALY
Mixing tank that mixes peat and soil with fertilizers, polystyrene, agri-perlite, pumice, expanded clay, etc. in order to obtain soft and homogeneous compounds suitable for ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your commercial irrigation controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
The Woodliner is a radio controlled automotive carriage, which allows an all-terrain operations, without mainline, strawline and haul-back cable. The carriage Woodliner is very suitable for the downhill work with a combination machine MOUNTY, but also as carriage in combination with other yarding systems. It is suitable for uphill transport, but in particular for horizontal and downhill ...
-
Manufactured by AquaScan ASbased in NORWAY
Equally suitable for moving both fry and smolts quickly but gently. Requires a pump and system able to deliver a continuous waterflow and always keeping the pipes completely filled with water. Recommended fish sizes are 10g to ...
-
Manufactured by AquaScan ASbased in NORWAY
The CSE 1600 is definitely our best selling unit worldwide. By handling sizes from 1g to 600g it covers almost any need when counting fry or smolts. The unit is very compact and lightweight, hence can easily be moved from one location to another. Each unit can count approx. 27 000 fish of 100 grams per hour. The pipe has an inner diameter of 150 mm ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
When processing wheat, spelt or other types of grain, various product components are produced, e.g. in a typical flour mill mainly wheat flour, which is used for the production of bakery products. However, bran, i.e. the husk of the wheat grain, which has a higher or lower starch content, is also produced as a ...
-
Manufactured by Hypro ABbased in SWEDEN
This thinning processor without crane is economically beneficial due to its high effectiveness, low purchase price and very low maintenance costs. Its three driven feeder wheels mean a big increase in feeding force. The machine is ideal for all types of thinning on diameters between 3 cm and 30 ...
-
Manufactured by CID Bio-Science, Inc.based in USA
Fast & intuitive leaf area measurements for in situ plant research. Single-handedly revolutionizing your data-collection workflowQuickly & non-destructively gather key leaf area measurements on even the longest leaves with the Handheld Laser Leaf Area Meter. Forestry & environmental applications: Taking measurements non-destructively, the CI-203 allows forestry and climate researchers ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
The BASELIER Hydraulic Folding Full Width Rotary Hook Tine Cultivator is designed for effective cultivation of beds before planting or sowing and also of grass land and other stubbles. Models are available up to 9.1 metres in width. All Baselier FKV Series Rotary Hook Tine Cultivators are now available with a rubber top plate as a factory fitted option. The rubber top plates replace traditional ...
-
Manufactured by Da Ros s.r.l.based in ITALY
High performance electronic destacker specifically designed for destacking rigid plastic or polystyrene trays. To make the most of its potential, it is recommended to combine it with the NP loading belt: not only to have greater autonomy, but because it was specifically designed with this intention. It is equipped as standard with Mitsubishi Electric® electronics which guarantees its ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
With our extruder OEE 25 NG (New Generation) we provide the extruder market with fresh impetus. The highest level of engineering and professional further development of our existing extruder make operation even easier than ...
-
Manufactured by Ecomatikbased in GERMANY
Leaf-to-Air-Temperature sensors (LAT) are used for direct, continuous and high-precision temperature measurements. The measured temperature parameters include absolute temperatures of the leaf surface, leaf-surrounding ambient air (Tair), and the temperature difference between leaf surface and ambient air (ΔTleaf-to-air). These devices are suitable for long-term application in outdoor ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
The Tigercat 604C cable skidder is a powerful, yet compact machine suited to high value selective cut hardwood logging and steep slope applications. With high quality components and construction, the 604C is designed for long service life and high uptime.Turnaround™, the new two-position rotating seat, is standard equipment for the 630D. With all controls available, the operator can ...
-
Manufactured by Ecomatikbased in GERMANY
Sap flow sensors are used to continuously measure water uptake in woody plants. It indicates if it is necessary to adapt the irrigation control. The SF-G model corresponds to the classic, two-needle model developed in 1985 by André Granier. ...
-
Manufactured by Hakki Pilkebased in FINLAND
In its category, the Falcon has by far the fastest splitting on the market, and the one-hand control lever makes the machine easy to use. Subject to wear parts have been minimized by installing hydraulic controls. This machine has no v-belts. In terms of its features, it is largely similar to its predecessor, the wildly popular Hakki Pilke 37 firewood processor. ...
-
Manufactured by Konrad Forsttechnik GmbHbased in AUSTRIA
Pulling force / max. cable speed : 50kN / 5 (8) m/s. Crane : KFT MT24. Lifting torque : 220kNm. Swing torque : 42kNm. Reach : 9,1m. Tower height : 14,2m. Transport dimensions : Length : 13,18. Width : 2,55. Height : 3,99. Carrier truck : MBArocsAK4142 ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
The Standen Powavator Bed Tiller is a powerful rotavator, which has been engineered for high performance and durability. The Powavator series has a proven track record when it comes to productivity and performance, having been one of our best selling ranges for almost 20 ...
-
Manufactured by Ecomatikbased in GERMANY
You know what to measure, we know how: Each project is different. This is especially true in the scientific field. A simple and cost-effective standard solution may be ideally suited to one case, whereas another case may require a more complex and individually designed measurement infrastructure. In this context, our customers benefit from our years of experience, individually designing and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you