Agricultural industry Equipment in Mississippi

  • Model LOF - Lift Offset Harrows

    AMCO’s LOF Lift Offset Harrows are perfect for building and maintaining food plots, logging roads, gardens, turn rows, and firebreaks, as well as seedbed preparation, pivot turn management, and much more. The LOF comes in three cutting widths―7’6″, 8’3″, and 9’0″―and weighs up to 2,392 pounds.

    By AMCO Manufacturing, Inc. based in Yazoo, MISSISSIPPI (USA). from 3-Point Discs/Lift Harrows Product line

  • Ag Spray Equipment - Pathfinder Trailer Unit

    Eliminate the need for saddle tanks. Telescoping tongue speeds hook-up with 1 1/8” draw bar pin. 120” wheel tread standard, other widths optional. Green frame with yellow tank and wheels or black frame with white tank and wheels. (Specify when ordering). Depending on tire selection up to 27” ground clearance. Axles pivot on ...

    By Ag Spray Equipment Office in Greenwood, MISSISSIPPI (USA).

  • Ag Spray Equipment - Burn Control Plumbing Kit

    Burn control skid units range in size and configuration. Any skid unit can be outfitted to meet your needs.

    By Ag Spray Equipment Office in Greenwood, MISSISSIPPI (USA).

  • Pierce Log Carriage

    The Pierce Log Carriage is a perfect fit for all size mills.  Offered in 2 knee through 5 knee.  36” opening up to a 54” opening.  With its new Patent Pending Way system knees slide smoother, with less friction assuring a quicker more accurate set with less power required.  The extra thick wall tubing frame provides ...

    By Pierce Construction & Maintenance Co., Inc. based in Petal, MISSISSIPPI (USA).

  • Challenger - Model 5 - Finishing Mower

    This heavy duty 5 ft commercial finishing mower has a powder coat painted 7 gauge deck. It comes standard with a 45 horsepower gear box, #4 drive shaft, floating hitch, 1 1/4' spindle shafts with ball bearings, rear discharge with chains, and solid tires. Rear wheels are offset to minimize turf compaction, scalping and improve turning.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from Finishing Mowers Product line

  • Golf Course Fairway Mowers

    A major golf course equipment company came to Lund seeking a domestic supplier of reel mower bed knives. The customer had experienced problems with the previous offshore vendor, including poor responsiveness, lack of timely delivery, etc. The parts involve a complex geometry and require adherence to extremely tight tolerances. Moreover, the OEM ...

    By Lund Industrial Group based in Holly Springs, MISSISSIPPI (USA).

  • Model 2000 LB - Clamp on Bucket Forks

    2000 lbs. Lift Capacity, 36' Length & 2' x 3' Forks, Screw Clamps For Easy Mounting, Mounts On Most Loader Buckets.

    By Watts Brothers Distributing, Inc. based in Hattieburg, MISSISSIPPI (USA). from Clamp on Bucket Forks Product line

  • Model FS761 - Spreader

    Spun one-piece hopper with welded heavy-duty door slides.Stainless steel doors for gauging spread.Fully adjustable spread left, right, or center.Powder coat paint for better looking, longer lasting finish.Recommended for tractors with 25-45 hp.

    By Watts Brothers Distributing, Inc. based in Hattieburg, MISSISSIPPI (USA). from Spreaders Product line

  • Model PH50B - Hoss Plow

    Plows like a mule without the kick!! Maxim’s Plow Hoss is a one wheel garden cultivator with a selection of plows - does everything a mule and plow used to do only faster. With all steel construction and simplicity of maintenance and operation, count on years of weed control.  Additional accessories are available. This one wheel garden ...

    By Maxim Manufacturing Corporation based in Rogers, MISSISSIPPI (USA). from Plows Product line

  • KBH - Model HB1350 - Hopper Bottom Trailers

    12 Gauge Sheet Metal throughout. Vertical Tubing Support Columns. Trailer Length: 40'. Trailer Width: 96'. Wall Height: 73'. Capacity: 1,350 Cubic Foot. 25' Ground Clearance (Empty). More Structural Steel than any other Trailer in the Industry. Longer Lasting Return on you Investment. Outstanding 25” Clearance (Empty). Smooth Operating Rack ...

    By KBH Corporation based in Clarksdale, MISSISSIPPI (USA). from Hopper Bottom Trailers Product line

  • KBH - Model 4 - Compartment Dry Fertilizer Tender

    4 x 300 Cubic Foot Compartment Hoppers. 1,200 Cubic Foot Capacity. 37 Tons Capacity Potash. 304 SS Hoppers, Augers, and Auger Tubes. Side Folding Hydraulic Discharge Auger .

    By KBH Corporation based in Clarksdale, MISSISSIPPI (USA). from Dry Fertilizer Tenders Product line

  • Pierce - Lumber Handling

    The Pierce designed easy timber let-down system ensures less damage to the timbers as well as the deck themselves.  Pierce is an innovator is the design, manufacture, and installation of lumber handling systems.

    By Pierce Construction & Maintenance Co., Inc. based in Petal, MISSISSIPPI (USA).

  • Model XH-180 - 36" Load Center Heavy Duty Pneumatic Tire Forklifts

    If you're in the market for a Mid-size Pneumatic Tire Forklift capable of handling long duty cycles and a lift capacity ranging from 18,000 - 65,000lbs, you're in the right place! Taylor 36-in Load Center Pneumatic Tire forklifts are engineered to meet the needs of the following industries: Steel, Aluminum,  Wood, Lumber, Concrete, Precast, ...

    By Taylor Machine Works, Inc. based in Louisville, MISSISSIPPI (USA). from Pneumatic Tire Product line

  • Model X-160 - 24" Load Center Heavy Duty Pneumatic Tire Forklifts

    If you're in the market for a Pneumatic Tire Forklift capable of handling long duty cycles and with a lift capacity ranging from 16,000 - 36,000lbs, you're in the right place! Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum,  Wood, Lumber, Concrete, Precast, ...

    By Taylor Machine Works, Inc. based in Louisville, MISSISSIPPI (USA). from Pneumatic Tire Product line

  • ATLAS - 2-Rope Clamshell Bucket

    An Atlas 2-rope Clamshell Bucket is for use with cranes with one hold line and one close line.

    By Atlas Manufacturing Company, Inc. based in Monticello, MISSISSIPPI (USA). from Buckets & Grapples Product line

  • Model F15 and C15 - Folding Disc Harrows

    AMCO F15 and C15 Double Offset Tandem Disc Harrows with folding flexwings are heavy-duty tools for primary tillage applications. Both models feature folding wings that flex and follow the contour of the field. The double offset tandem design effortlessly smooths the soil to create the perfect, berm-free seedbed.

    By AMCO Manufacturing, Inc. based in Yazoo, MISSISSIPPI (USA). from Disc Harrows Product line

  • Forage Harvester Cutting Systems

    The job of a forage harvester is simply to chop a crop such as corn into animal feed. As such, the cutting system is the heart of the machine and the measure of its effectiveness. The self-propelled versions of these machines cost hundreds of thousands of dollars. The longer the cutting system remains sharp and efficient, the longer the machine ...

    By Lund Industrial Group based in Holly Springs, MISSISSIPPI (USA).

  • Big Foot Filter Stand

    The Big Foot filter stand is designed for use with the Big Foot 40G Irrigation Filter or a 2' Slotted PVC screen for use as an intake for irrigation systems. The stand is intended to keep the 40G Filter or 2' PVC screen suspended above the bottom of the water source. It can be held in place by a 4 x 8 concrete block or other ballast. Manufactured ...

    By Big Foot Manufacturing Co. based in Cadillac, MISSISSIPPI (USA).

  • Model 2100 – PBAT - Compostable Grades Algae Solaplast

    Base resin: Compostable – Poly Butylene Adipate Terephthalate (PBAT). Product Conversion: Cast and Blown Films, injection molding. Character: High Flexiblity, Tough, low-MFI, capable of thinner films. Can blend with PLA to improve properties increase stiffness.

    By Algix, LLC. based in Meridian, MISSISSIPPI (USA). from Solaplast - Compostables Product line

  • Model 1700 HIPS - Durable Grades Algae Solaplast

    Base resin: Durable – High Impact PolyStyrene (HIPS). Algae Loading: up to 45%. Product Conversion: Sheet extrusion and Thermoforming, injection molding. Character: Strong, rigid, tough, moderate flexibility, general purpose

    By Algix, LLC. based in Meridian, MISSISSIPPI (USA). from Solaplast - Durables Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you