Agricultural industry Equipment in Tennessee

  • Premium

    Myron L - Model Ag-Stik™ 599A - Agriculture Sensor Systems

    Features: Extremely simple set-up. Reliable Operation. Minimal Maintenance. Standard 115 VAC (230 VAC Optional). Sensor/STIK included with 10 ft. cord. EC Range 500-5000 μS/μM. NEMA 4X/IP65 Fiberglass Weatherproof, wall-mount enclosure with 316 stainless steel hardware standard.

  • Premium

    Myron L - Hydroponic Instruments - Handheld Meters, Monitors and Kit

    Handheld meters measure TDS and/or pH. Monitor measures TDS. all instruments are easy to operate and calibrate. High degree of accuracy. Immediate results. Kit comes with solutions required to calibrate. temperature Compensated readings.

    By Myron L Company Distributor in TENNESSEE (USA). from Portable Water Testing Instruments Product line

  • HIJACKER - Rear Bale Spear

    Made From Heavy Wall High Strength Tubing. Increases Tractor Lift More Than 3 Feet. Needs Top Link Or Hydraulic Cylinder Installed For Proper Operation. Handles Up To 1500lb. Bales.

    By A & B Eagleline Equipment, Inc. based in Sweetwater, TENNESSEE (USA). from Bale Spears Product line

  • Athens - Model 156 - Chisel Plows

    Tine Size – See Optional Equipment. Tine Spacing - 12'. Chisel Points - 5/8'. Clearance, Frame to Point - 26' or 32'. 2 Bar Extension Widths - 2' or 4'. 3 Bar Extension Widths - 2', 4', or 6'. Hitch – Category I, II, or III.

    By Athens Plow Company,Inc. based in Athens, TENNESSEE (USA). from Chisel Plows Product line

  • Model PackPlanter - Transplanter

    The PackPlanter was developed for high speed transplanting into packs or pots in a small frame. Speed, simplicity and quality, has been leading key words during the entire design as there are currently more than 100 units on the market.

    By Tuinbouw Technisch Atelier (TTA) Office in McMinnville, TENNESSEE (USA). from Transplanting Equipment Product line

  • Model PackPlanter Wireless - Transplanter

    A high-end transplanter for many varieties of young plants. The PackPlanter was developed for high speed transplanting into packs or pots in a small frame. Speed, Flexibility and Quality has been leading key words during the entire design.

    By Tuinbouw Technisch Atelier (TTA) Office in McMinnville, TENNESSEE (USA). from Transplanting Equipment Product line

  • Model MIDI Curve - Transplanter

    The design of the MidiCurve incorporates the possibility to operate over both a circular potfiller as well as transplanting over a conveyorbelt for packs. Transplanting over a circular potfiller offers a lot of advantages such as a nice drilled hole (transplanting straight after drilling), flexibility in potsize, multiple plants per pot, etc. The ...

    By Tuinbouw Technisch Atelier (TTA) Office in McMinnville, TENNESSEE (USA). from Transplanting Equipment Product line

  • Athens - Model 37 - Lift-Type Disc Harrows

    The front and rear frame of the Athens 37 is constructed of angle and steel tubing, welded into a unitized assembly for strength and durability.  The rear frame can be pinned in the up position to increase the weight on the front gangs for the initial pass.

    By Athens Plow Company,Inc. based in Athens, TENNESSEE (USA). from Lift-Type Disk Harrows Product line

  • Athens - Model 153 - Heavy-duty Tandem Disc Harrow

    1 1/2' Cold Rolled Square Gang Axle.Double Tapered Roller Bearings. Rigid or Spring Bearing Hangers with Wear Guards.Disc Blades, 24' Diameter C/O or SM.Disc Spacing, 9 1/2'.Dual Wheels.Lifting Hydraulics.Heavy-Duty Tube Mounted Scrapers.Cover Discs with Scrapers.Self-Leveling Frame.Mechanical Transport.Reversible Tongue Clevis.Gang Wrench and ...

    By Athens Plow Company,Inc. based in Athens, TENNESSEE (USA). from Pull-Type Disc Harrows Product line

  • COMBO-RATE - Nozzle Bodies

    Let you spray with more than one tip at same location to optimize coverage, drift control... and results. COMBO-RATE II saddles have a universal mount that allows them to be mounted with the fluid take off at bottom of the boom pipe, just like conventional nozzle bodies.

    By Wilger Inc. based in Lexington, TENNESSEE (USA). from Nozzle Bodies Product line

  • Conventional / Square-Lug Swivel Nozzle Bodies

    CONVENTIONAL / SQUARE-LUG SWIVEL NOZZLE BODIES are interchangeable with conventional / square-lug nozzle bodies and accommodate conventional / square-lug tip caps. Available in single, double and triple outlet wet boom, dry boom and KWIKSTOP models.

    By Wilger Inc. based in Lexington, TENNESSEE (USA). from Nozzle Bodies Product line

  • Grain-O-Vator - Model 6GOV65 65 Bushel - 6 Grainovator

    6’ single compartment boxes are available in 65 or 95 bushel capacities. Single gate system comes standard. Single axle with 15” X 8” rims and 11L15 farm implement tires come standard (Road tires available on request).

    By Four Star Manufacturing, Inc based in Lewisburg, TENNESSEE (USA). from Grain-O-Vator Product line

  • Hay Equipment

    Specs: All-welded steel frame construction. 3,200 lb. rated Italian forged penetrator spear comes standard. Standard spear is 1 5/8' diameter for greater penetration. Support spears stabilize bale for positive load handling. 2' heavy duty stress-proof spear with double taper is optional. Industrial grade paint available in many popular colors. OEM ...

    By Four Star Manufacturing, Inc based in Lewisburg, TENNESSEE (USA).

  • Wagon Flats

    Construction: All wood is Tennessee-harvested White Oak. All flats are 8' wide. 4' X 6' runners standard on 16' flat (4' X 8' runners optional). 4' X 8 ' runners standard on 18' and 20' models. 3' X 4 ' cross-members. 1' X 8 ' planed deck boards run full length. Welded frame contains 2' X 4' stake pockets. Ready to fit any running gear. Custom ...

    By Four Star Manufacturing, Inc based in Lewisburg, TENNESSEE (USA).

  • Colt - Model FT - Forward-Rotating Front-Tine Rototiller

    The Colt™ FT garden rototiller features a powerful 208cc Troy-Bilt® OHV 4-cycle engine and patented Bolo® tines that cut through soil with ease, resulting in finely tilled, well-aerated soil.  The Bolo curve design allows the tines to cut and dig at an offset angle for groundbreaking while the swept-back angle turns under the ...

    By Hooper Power Equipment based in Murfreesboro, TENNESSEE (USA).

  • Athens - Model 55 - Mounted Disk Harrow

    Standard Equipment; Category II Hitch. 1 1/8 ' Square Steel Axle. Relube Ball Bearings. Adjustable Angle of Cut - 13° to 21°. Disc Gang Wrench. Disc Spacing – 7-½', 9', or 9' Front / 7-½' Rear. Extra Equipment; Heavy Duty Scraper Blades. Cover Disc. Balk Buster.

    By Athens Plow Company,Inc. based in Athens, TENNESSEE (USA). from Lift-Type Disk Harrows Product line

  • Model H1000-M - Incu-Shaker Mini w/Non-Slip Rubber Mat

    Benchmark's Incu-Shaker Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5' work space accepts several platforms for use with a variety of flasks, tubes and other common vessels. The standard platform (included) features a non-slip, rubber coated surface ideal for tissue ...

    By Wilmad-LabGlass Office in Kingsport, TENNESSEE (USA). from Lab Equipment-Cell Culture-Incubator Product line

  • Model COMPASS Series - Rotary Rakes

    Pivoting third point hitch COMPASS 350 and 385 - tine distance from the ground can be simply adjusted by a handle - windrow curtain with telescopic adjustment, no tool required - oil lubricated rotor mechanism - spring-supported arms can be quickly positioned in transport position.

    By Tonutti Wolagr S.p.A Office in Memphis, TENNESSEE (USA). from Rakes Product line

  • Flail-Master - Riding/Walk Behind Mower Blades & Parts

    We offer a wide variety of replacement blades to fit most riding and walk-behind commercial mowing equipment used by landscapers and lawn care professionals. Many blades are available in a GATOR MULCHER  style in addition to the OEM style.

    By Flail-Master based in Murfreesboro, TENNESSEE (USA).

  • Flail-Master - Mower Blades and Parts

    Flail-Master offers replacement flail mower blades and a large variety of other flail mower parts for mowers being used by roadside maintenance crews, vegetation management, public works departments, orchards, and personal use. Manufactured right here in middle Tennessee, our “Made in America” quality is unmatched! We offer the best ...

    By Flail-Master based in Murfreesboro, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you