LAR - Model FlowSampler - Maintenance-Free Sampling System
From Further Products
The FlowSampler is a patented sampling device from LAR which does not require filtration because the sample is siphoned-off from the sample stream towards the main flow direction of the water. Therefore, no large particles can get into the sample stream. The smaller particles are collected because the unaltered sample then enters the system. The FlowSampler can handle even difficult challenges like the sampling at the inlet of a sewage treatment plant or before the course screening.
Technical Description
The sampling device FlowSampler requires a flow of 2-5 m³/h (max. 10 m³/h) and at a max. counter pressure of <0.2 bar at the sampling tube of the FlowSampler (Di = 3). The temperature of the sample should be less than 50 °C. For sample temperatures up to 90°C, a special PP version of the FlowSampler is available.
The connection of the FlowSampler can be realised as a PVC tube screwing of 32 mm (external) or as tube connection for a pressure hose with 30 mm internal diameter. For the sample drain the same dimensions are valid.
The sample dosing can be done by an immersion pump which may require a cutting device, depending on sample composition. The pump should guarantee the necessary flow of 2-5 m³/h (max. 10 m³/h) over the bridged distance.
The FlowSampler from LAR is installed next to the analytical device (i.e. at the wall).