- Knife Roller

From

0

New thinking in the treatment of various kinds of stubble and residual plant matters, means this operation needs to happen quickly. MaxiCut can be used on maize, rape, cereals, vegetables, sunflower, tobacco and cotton etc.. The residual plant is cut, crushed and left on the surface. The contact with the soil will start the work of the micro organism. MaxiCut is an effective means against the European corn borer, which is a new challenge in growing maize. The grubs overwinter in the stubble, and the only control without chemical use is to cut and crush the maize stubble. The MaxiCut is an efficient implement for this

The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.

The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.

MaxiCut Standard & Options
The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.

The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.

  • Whell trac eradicator
  • Front cage roller
  • Rear cageroller
  • Air brakers

Customer reviews

No reviews were found for MaxiCut - Knife Roller. Be the first to review!