Miniliner - Radio Communicator
The MINILINER has been designed to serve as a wireless bridge between any commanding unit and remote actuators and sensors. The unit can handle 4 outputs arriving from the commanding unit and return 4 inputs arriving from the field. The input/output terminals of the MINILINER are connected back to back with the input/ output terminals of the commanding unit. For reaching the remote actuators and sensors the system uses radio communicated Remote Terminal Units (RTU). Connected to the MINILINER there is an RF Master that carries out the communication to the RTUs via the RF Slave connected to each RTU. More information about the RF system can be found in the 'RF RTU system guide 2007'
- The 4 outputs and 4 inputs can be allocated to the RTU units in any combination. We can have all outputs and inputs allocated to the same RTU (using only 1 RTU), or we can have each of them in a separate RTU (using 8 RTUs) or any combination in between.
- The system accepts commands in form of 24v AC or 24v DC continuous or 12v DC latching with 2 or 3 wired connection.
- The position of the inputs arriving from the field is presented to the commanding unit by dry contacts..
- The whole system is a DC system which can be used where main electricity supply does not exist.