PhiBer - Model ACXX08 - Accumulator
From Accumulator
The standard accumulator is configured for standard dry hay, straw and corn stock conditions.
-
Most popular related searches
Products Details
- Fully automatic
- Designed for simplicity
- Works on a variety of bale lengths and conditions
Advantages
Picking up pre-packaged bales that match loader capabilities can cut loading time up to 50% over picking up bales one at a time. This will substantially reduce the amount of time a hay operation spends picking bales. Saved time translates into saved money from less labor and depreciated hours on equipment.
Like the generations of accumulators before it, the Bale Accumulator is fully automatic. The operator can concentrate on the baling process and not worry about the accumulator. If the operator wants to override the automatic unloading, they can eject whatever is on the deck at anytime. The Bale Accumulator is designed with many fail-safe’s, such as safety lockouts are built into the machine for operator peace of mind.
Key Features
Operators can chose from four different automatic unload programs to package the bales in a form that matches their handling abilities. Bales that are packaged the same way they are to be handled can greatly reduce the time it takes to collect them after baling. Operators can also manually eject the bales carried on the deck at any time. The automatically ejected bales are tight and ready for handling.
The PhiBer Bale Accumulator is designed for many different applications. The 06 Series Accumulators have models for both dry hay and balage applications. The Accumulator is designed to work with bales varying in length from 4.25′ (130cm) to 9′ (275cm). The key for the PhiBer Bale Accumulator to perform in such a wide variety of conditions is its ability to push the bales off the deck rather than tip them off. PhiBer has a patented system to push bales off even if a bale is half out of the chamber allowing operators to unload bales whenever desired.
All PhiBer Accumulators are powered using the tractor hydraulics. Unique to PhiBer is the ability to set them up in all three different hydraulic systems, closed center, open center and closed center load sensing.
The Accumulator can run automatically so the operator never has to look back and can focus on the baling operation. The Accumulator is also designed so no daily maintenance is required and have built in safety features to keep both the operator and machine safe while operating and servicing equipment.
How it Works
A unique feature to the PhiBer Bale Accumulator is its ability to automatically group bales together in the desired dump pattern. The operator can choose a dump pattern that best matches how they are to be picked up later. An in cab monitor allows the operator to see how many bales are on the deck and manually eject the bales at any time.
The PhiBer Accumulator detects the incoming bale from the front unlike others. This allows operators to work with a variety of bale lengths with little to no adjustments. As the bale button in the front is depressed, a side shift bar moves the bale to the left or right. When the deck is full to its programmed capacity a push off roller pushes all the bales off the stationary deck.
The PhiBer Accumulator features a unique design because it pushes the bales off the deck using a push roller. This allows bales in varying conditions to be ejected evenly from the accumulator.
Customer reviews
No reviews were found for PhiBer - Model ACXX08 - Accumulator. Be the first to review!