Model ID3 - Air Injector Nozzles



Spray angle: 120°. Material: POM, ceramic. Application of plant protectants and growth regulators. Particularly well-suited for application of liquid fertilizer (UAN);pressure range for pure UAN: ID 2.0 to 3.5 bar; IDN 2.0 to 3.5 bar.


  • Air-aspirating flat-spray nozzle
  • Nozzle sizes 01 through 08 Pressure range 2.0 to 8.0 bar
  • Extremely low drift potential for whole pressure range
  • Significantly improved deposition structure thanks to aerated droplets  
  • Fits all bayonet cap systems with 10 mm AF and threaded caps (Ø 12.6 mm)
  • Transfer of JKI-approvals of ID/IDN to ID3 is requested

  • More solid design of nozzle body by filed construction
    - 0.9 cm shorter in comparison to ID range
    - Improved protection of nozzle tip by reinforced side walls
    - Easier cleaning of nozzle body by smooth transition
  • Plane injector orifice
    - Easy wipe away of residues and dirt
    - Toolless removal and assembly of injector e.g. for cleaning purpose
    - Correct alignment of injector into the nozzle body by inside catch
    - Safe sealing between injector and nozzle body by o-ring
  • Extended pressure range from 2.0 to 8.0 bar
  • Long injector design responsible for high drift stability
    - Reduced fine droplet fraction also at higher pressure
    - Increased work rate at higher speeds
    - Even better adaption of sprayer speed and l/ha-rate without changing of nozzles
    - Application in due time even under worse weather conditions
    - For use at wind speeds up to 5 m/s according to good agricultural practice
    - Potential of 90% drift reduction at 2.0 bar
  • Proved materials such as POM or ceramic available depending on application conditions
  • Non sensitive towards clogging due to big cross sections
  • Very good deposition structure and crop-canopy penetration ensures high biological performances

Customer reviews

No reviews were found for Model ID3 - Air Injector Nozzles. Be the first to review!