Model TS 840 - Transfer Switches
From Transfer Switches
UL 1008/ CSA 178 Certified, 100-800 AMP Single & 3 Phase 240V Max. Rugged, economical solution for the harsh environments of the agricultural industry. Available from 100 amp - 800 amp single and 3 phase 240 volt. Options include Service Entrance rated and Load Distribution. Easy to use TSC 80 ATS controller requires no software programming. UL 1008 listed.
-
Most popular related searches
Features
- Amperage Range 100A - 800A
- Voltage Range: 120/240V or 120/208V
- Poles: 2 or 3
- Frequency: 50/60Hz
- Power Distribution: Single Phase, 3 wire or 3 Phase, 4 wire
- Controller: TSC 80
- Standard Enclosure: Nema 3R SD (100 - 600A), NEMA 3R DD (800A)
- Safety Standard: UL 1008 , CSA C22.2 No. 178
- Quality Assurance: ISO 9001 Registered
- Warranty: 1 Year
STANDARD FEATURES:
- Load on Utility & Load on Generator Lights
- Utility & Generator Source Available Lights
- Three Phase Voltage Sensing on Utility & Generator Sources
- Under Frequency Sensor on Generator Source
- Engine Start Delay Timer 0-60 sec.
- Engine Cooldown Delay Timer 0-30 min.
- Engine Warm-up Timer 0-60 sec.
- Neutral Position Delay 0-60 sec.
- Utility Return Timer 0-30 min.
- Engine Start Contact (10A, 120/240VAC res. Form B)
- Exercise Timer (On or Off Load, Fixed 30 min.)
- Auxiliary Contact - Utility side (10A, 120/240VAC res. Qty 1, Form C)
- Auxiliary Contact - Generator side (10A, 120/240VAC res. Qty 1, Form C)
- Local Utility Power Fail Simulation Test Pushbutton
- Provision for Remote Load Test/Peak Shave Switch Input
- NEMA 3R Enclosure
- Solid Neutral
- Storage Temperature: -20oC to 70oC (-4oF to 158oF)
- Operating Temperature: -40oC to 50oC (-40oF to 122oF)
- Humidity: 95% non-condensing, maximum
Options
OPTIONAL FEATURES: (Specify separately from ATS MODEL CODE when ordering)
CODE DESCRIPTIONS
Dist2 2 Load Distribution Breakers (Qty 2, 200A, 2 Pole Only)
Dist4 4 Load Distribution Breakers (Qty 4, 200A, 2 Pole Only)
Dist6 6 Load Distribution Breakers (Qty 6, 200A, 2 Pole Only)
SDM LCD Service Display Module
- Displays TSC 80 Controller Settings and Timer Adjustments
- Plug in Connector and Cable
TS-H1 Enclosure Strip Heater c/w Thermostat (120VAC External Power Source Required)
TS-H2 Enclosure Strip Heater c/w Thermostat (Internally Powered from ATS Load)
Customer reviews
No reviews were found for Model TS 840 - Transfer Switches. Be the first to review!