MECCANICA CREMONINI s.n.c.

Motor Pump Sets

0

The motor pump sets of Meccanica Cremonini are suitable for fixed or wheeled irrigation systems, they can work both at low and  high pressure ensuring the maximum level of reliability, high performance and low consumption.

The motor pump sets are fitted as standard:

  • Diesel air or water cooled engine
  • Centrifugal or horizontal pump for water feeding, bare shaft centrifugal pump for water diversion, self-priming pump for drainage and pumping of dirty water
  • Pump for extracting the oil installed on the engine
  • Electric starting through battery
  • Battery casing with protecting sump
  • Control panel, model CEM 250
  • Motor and pump coupling through elastic joint
  • Silent Block among motor, pump and frame
  • Adjustable feet
  • Chassis in painted steel profiles with feet or on trolley with King Tire 10.75 R 15 wheels on axle and drawing bar, equipped with eye for towing.
     

The units can be completed with accessories available in the following versions: OPEN, SILENT and SUPER SILENT.

CASING/PROTECTION
  • CANOPY (OPEN): Bent plate canopy with removable protecting grids.
  • ENGINE CASING (SILENT): Partial sound-proof casing in bent plate with sound-absorbing foam internal coating to reduce the noise of the motor pump set.
  • MOTOR and PUMP CASING (SUPER SILENT): total sound-proof casing.
PUMP FILLING
  • PAM PUMP: Diaphgram PAM pump for filling the suction hose equipped with spiral hose and joints.
  • PLUTO PRIMING LEVER WITH SPIRAL HOSE: for fast filling the suction pump through Ventury system, using the pressure of the engine exaust gas.
  • ELCTRO PUMP WITH SPIRAL HOSE AND JOINTS: self-priming electro pump, mod. ECC12/20 with lateral channel for pouring off the liquids during the suction.
LIFTING SYSTEMS
  • Metal frame with lifting arm for pipes: the articulated arm is suitable for transporting and lifting suction pipes and it is equipped with manual winch.
  • Electric winch: winch with electric engine at 12 Volt -0,7 Kw, traction max. 450 Kg, with push-button panel and steel cable.
DELIVERY PIPELINE
  • Swivel gooseneck: it replaces the delivery flange, it has a wafer gate valve, delivery pipe for the irrigator with three hooks female ball joint without delivery for the irrigator.
  • Swivel gooseneck with coupling for irrigator: it replaces the delivery flange, it has a wafer gate valve, delivery pipe for the irrigator with three hooks female ball joint with delivery for the irrigator. 
SUCTION PIPELINE
  • Suction flange: DN flange with Ferrari male galvanized ball joint
  • Suction unit: it is composed with 2 m long rubber hose, ball joints and clamps and 2 m long steel pipe with footvalve.

ACCESSORIES

  • Light system: rear lights and indicators for transporting by night
  • Control panel, model  Cem 256: equipped with sound alarm and gsm mobile control system.
  • Control panels, mod. CIM 131 and CIM 137: equipped with water pressure switch and gauge, sound alarm, with or without gsm mobile control system
  • Linear actuator: VAR 140 accelerator with speed regulation
  • Work lights: swivel lamp
  • Clutch coupling: one-ring centrifugal clutch (for engines up to 128 CV) or double-ring (for engines from 130 CV to 238 CV) for automatic engagement and disengagement of the pump during the acceleration and deceleration

Customer reviews

No reviews were found for Motor Pump Sets. Be the first to review!