Multicut - Lawnmower
The MULTICUT has been awarded the European Community certificate of approval and complies fully with EC Machine Directives. Maintenance problems are trimmed to a minimum as the MULTICUT requires no more than the standard cleaning and checking operations for a traditional lawnmower. Since the MULTICUT can be folded each part of the device is easy to access, making maintenance even simpler. Before carrying out maintenance operations, always stop the tractor and release the universal joint; maintenance instructions are set out in the “Operating, Maintenance and Safety Manual” which accompanies each Caroni device.
MULTICUT: INCREASED PRODUCTIVITY
The MULTICUT is manufactured using state-of-the-art design criteria and highly modern construction techniques.
The device consists of three rear lawnmowers with vertical axes, of the TC series - width 1200, 1500, 1800 and 2400 mm - mounted on a single chassis which can be connected up to any tractor: from 30 up to 75 HP.
A perfect combination of mechanical, hydraulic and production features which, at speeds of 10/15 km/h, reduces the number of cutting operations, work times and labour costs while making each lawnmower three times as efficient.
Reduced operating times also result in lower fuel consumption and less pollution from the tractor.
All these features are combined in a device which weighs from 950 up to 1300 kg.
With an operating range from 3.60 up to 5.65 m, MULTICUT increases productivity and cuts the time and costs of maintaining sports fields, parks, fairways and large grassed areas in general, sectors for which it was specially designed.
EXECELLENT PERFORMANCE ON ANY SURFACE
Drive is transmitted by means of a universal joint to a fourwaybox and then by means of three more universal jointsto the three cutting devices which operate independently.
Each lawnmower in anchored to the supporting structure individually by means of oscillating arms and is equipped with “extra wide” wheels.
Since the lawnmowers operate independently they are able to follow the contours and irregular features of the land, cutting the grass evenly and accurately to heights of between 25 and 100 mm.
EASY TO TRANSPORT
The MULTICUT has a three cylinder hydraulic system designed to fold the three lawnmowers vertically when work is complete, reducing the width of the device to just 2.00 m - 2.20 m - 2.40 m, depending on the model. This makes it extremely easy to transport the MULTICUT by road.
Two extra wide tyres and a hydraulic stop on each device increase safety and stability.
THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY.
THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP.
The Mulching and Recycle System comes in a wide variety of different versions to match Caroni’s entire range of rear, side and multiple rotary mowers.
The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers.
The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case.
The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate.
One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings.
Another plus is that the shredded grass and leaves make wonderful natural compost – not too wet, not too dry - which is recycled into the biological chain without doing any damage.
In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.