Agricultural Industry Equipment Near Iowa
-
Manufactured by Fischer Mulchgeräte GmbHbased in ITALY
Unico is the new Fisher swing arm, conceived for public use, like the mowing of grass underneath the protection fence of cycle paths, or underneath guard rails on public roads! The attachment for this arm can be either front or rear. Thanks to the steering wheels and the lateral hydraulic movements, Unico is very agile and also manages to access very diffi cult to reach spaces. For the faster ...
-
Manufactured by Fischer Mulchgeräte GmbHbased in ITALY
The SL mower is rugged, compact and of low construction. Ideal for young plantations with low-hanging fruit. The new precision control allows accurate and gentle sensing of the tree trunk which cannot be damaged thanks to the rubber armouring of the swing disk. The swing arm is hydraulically or electrically positioned from the tractor using a controller or electric ...
-
Manufactured by Fischer Mulchgeräte GmbHbased in ITALY
The “Fischer Mower” is the fi rst in the world designed, developed and manufactured in-house especially for “V”-shaped plantations - those on two different, essentially opposite inclinations! The GL4/K model can be used on any terrain requiring general adaptability and versatility. The counter-rotating sickle blades not only cut the grass perfectly but can also work ...
-
Manufactured by Psenner K.G.based in ITALY
2-wheel drive, 3-cylinder Kohler KDW1003/B1 diesel engine, water-cooled, steerable front axle with hydraulic power steering, working height 2.35 m, exterior width 1.40 m or wider, if required, 2-speed gears, change smoothly in forward and reverse, differential lock, hydraulic brake on the rear wheels, safety curtain in conformity with the standards in force, hydraulic trap opening, standard tyres ...
-
Manufactured by Psenner K.G.based in ITALY
Hydraulic or mechanical tipping scoops for tractor ...
-
Manufactured by Psenner K.G.based in ITALY
Simple and stable design, good visibility to the working area, crate retainer, forged steel forks, control unit with 4 levers, inclination cylinder, side adjustment, safety valves on lifting- and inclination cylinders, safety chain, command can be mounted on rear wing due to the long hydraulic tubes and affords a comfortable working, three-part forklift, total height from 1300 mm, principally for ...
-
Manufactured by Psenner K.G.based in ITALY
Assembling: The R 110 model is mounted by driving the forklift forks into the device and securing with two locking screws and a bolt. Tecnical data: The model is designed for large cases with a height of 550 mm and 750 mm and an angle of rotation of ...
-
Manufactured by Psenner K.G.based in ITALY
Flat and compact design for vineyards and orchards. 3-point linkage hydraulically adjustable. driven by 2 V-Belts. Optional: Plate holder, herbicide spraying ...
-
Manufactured by Psenner K.G.based in ITALY
Ideal for transporting bulk material such as sand, shards, waste, cereals, fruit and ...
-
Manufactured by Psenner K.G.based in ITALY
4-wheel drive, 3-cylinder Kohler KDW1003/B1 diesel engine, water-cooled, steerable front axle with hydraulic power steering, working height 2.35 m, exterior width 1.40 m or wider, if required, 2-speed gears, each change smoothly in forward and reverse, hydraulic brake on rear wheels, safety curtain in conformity with the standards in force, hydraulic trap opening, standard tyres all 4 wheels ...
-
Manufactured by Psenner K.G.based in ITALY
3 point linkage. driven by angular gearbox in opposite running direction. cardan shaft. width-adjustable wheels. cutting height adjustment 3-fold. Optional: herbicide spraying ...
-
Manufactured by Psenner K.G.based in ITALY
A range of products for orchards and vineyards, which leaves nothing to be desired. Driven by 2 angular gearboxes in opposite running directions, cardan shaft, width-adjustable wheels, infi nitely variable width adjustment, 4 blades, Optional: Plate holder, front-attachment, 3-point linkage hydraulically adjustable, herbicide spraying ...
-
Manufactured by Deleks S.r.l.based in ITALY
Single Furrow Plough for 25-35HP Tractors, Japanese tractors, Compact tractors like New Holland and John Deere | DELEKS DP-20. DP-20 designed for cultivating clay or sandy soils, it fits most common compact tractor brands (no larger than 1300.0 mm): Japanese tractors: Kubota, Kioti, Iseki, Yanmar, Mahindra, and compact tractors: John Deere, McCormick, New Holland Boomer 25-30 etc. Universal 3 ...
-
Manufactured by Deleks S.r.l.based in ITALY
Reversible Plough For 14-35HP Tractors, for Japanese tractors and John Deere | DELEKS DRP-25. This time saving, reliable plough has been designed for the most common compact tractor brands (no larger than 1200.0 mm): Japanese tractors like Kubota, Iseki, Kioti, Yanmar, Solis, and compact tractors John Deere, New Holland, McCormick, etc. Designed for cultivating clay or sandy soils. Manual (lever ...
-
Manufactured by Deleks S.r.l.based in ITALY
Single Furrow Plough For 12-30HP for Tractors Kubota Kioti Carraro |DELEKS DP-16. DP-16 designed for cultivating clay or sandy soils, it fits most common compact tractor brands (no larger than 1250.0 mm): Japanese tractors Kubota, Kioti, Iseki, Pasquali, Yanmar, Solis, Mahindra, and narrow tractors like New Holland Boomer 25, John Deere, Pasquali, Ferrari etc. Universal 3 point linkage Cat.1. ...
-
Manufactured by Deleks S.r.l.based in ITALY
Single Furrow Plough for 12-30 HP for Japanese Tractors or compact John Deere | DELEKS DP-18. DP-18 designed for cultivating clay or sandy soils, it fits most common compact tractor brands (no larger than 1250.0 mm): Japanese tractors Kubota, Kioti, Iseki, Pasquali, Yanmar, Solis, Mahindra, and narrow tractors like New Holland Boomer 25, John Deere, Pasquali, Ferrari etc. Universal 3 point ...
-
Manufactured by Deleks S.r.l.based in ITALY
100cm working width, Electronically balanced rotor, with hammers or blades | DELEKS APE-100 for small tractors 12-30Hp, Pto shaft included. The APE-100 flail mower has been designed for low-powered tractors e.g Kubota BX-B, Iseki, Yanmar, John Deere 1-2 Series, Pasquali, etc. 12-30Hp, for garden and farm use. Heat forged hammers for grass, thicker vegetation and small twigs. Cutting height can be ...
-
Manufactured by Deleks S.r.l.based in ITALY
Light rotary tiller for tractors 12-35hp e.g Kubota B-BX, Iseki, Yanmar, Mahindra, Mitsubishi, Ferrari, New Holland Boomer 25, John Deere 2 Serie, etc. The tiller is attached to the tractor using universal three point linkage. Designed for soil preparation/cultivation in nursery, orchards, and for gardens. Our rotavators can be used to pulverize and stir soil before planting (to prepare seed ...
-
Manufactured by Deleks S.r.l.based in ITALY
Rotary Tiller DELEKS for 35-60 Hp Tractors, Rotovator 150cm / 352 kg - Side Gears Drive - Pto shaft CE included. The DFH Rotary Tiller has been designed for soil preparation, in fields, nursery, orchards, allotments, and for gardening. Rotating blades break up the soil, on rough uncultivated ground. Can be also be used for weeding or working surface material into the soil. Designed to fit most ...
-
Manufactured by Deleks S.r.l.based in ITALY
The DFH Rotary Tiller has been designed for soil preparation, in fields, nursery, orchards, allotments, and for gardening. Rotating blades break up the soil, on rough uncultivated ground. Can be also be used for weeding or working surface material into the soil. Designed to fit most compact 30-60HP tractors e.g Kubota L, Lamborghini, Fiat, McCormick, Landini Mistral, New Holland Boomer 35-40, T3, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you