New Holland - Model T9 Series - 4WD Tractor
New T9 4WD tractors give you the power you need and the comfort you want. If the engine and hydraulic power doesn’t turn your head, the sleek design and the largest cab in the industry certainly will. Six new models are ready to fit your farming needs. For those who want a row-crop ready articulated tractor, take a look at one of the four standard 36-inch-wide frame models up to 507 engine horsepower. The slim T9 engine hood provides improved forward visibility and the inboard planetary drive axles allow for narrow wheel width settings. For broad acre work, check out the two higher-horsepower, wide-frame models in the line-up. Their top-level performance is packaged in a new, beautifully balanced chassis that delivers more power to the wheels for improved productivity. Brain and brawn. New Holland knows it takes both to get the job done right.
CLEAN-RUNNING ENGINES THAT SAVE YOU MONEY
As the Clean Energy Leader, New Holland makes it a priority to incorporate intelligent engine solutions into our tractors. Thanks to New Holland ECOBlue™ technology with SCR the new Cursor 9 and Cursor 13 engines used in T9 4WDs deliver increased horsepower while using less fuel and meeting stringent Tier 4A emission standards. The result: you cover more acres in a day and save both time and money.
UNMATCHED POWER, READY WHEN YOU NEED IT
With models ranging up to 670 max engine horsepower, T9 Series tractors offer best-in-class power. But these engines deliver a new level of efficiency, too. The New Holland Engine Power Management (EPM) system continuously adjusts engine output to match your working conditions so you get the very best fuel efficiency and boost your overall productivity. When faced with demanding hydraulic, PTO and transport tasks, T9 engines deliver increased power and torque to maintain performance.
SCR ADVANTAGE: BREATHABILITY
T9 ECOBlue engines make use of Selective Catalytic Reduction (SCR) technology and DEF/AdBlue® after treatment to convert the nitrogen oxides in exhaust gas into harmless water and nitrogen. This treatment is separate from the air intake which means an SCR engine “breathes” only clean fresh air, ensuring optimal combustion conditions. New Holland has the advantage of working with an experienced engine development partner, Fiat Powertrain Technologies (FPT).Since FPT has already produced over 150,000 SCR engines during the past five years for trucking use, you can be assured of T9 engine reliability.
The Cursor 13 engines used in the two largest models, the T9.615 and T9.670, use a two-stage turbocharger. The first turbo feeds the second, delivering higher torque and higher sustained power to cope with the most demanding tasks and conditions.
The T9 cooling system features improvements compared to previous models to handle the heat generated by the new, more powerful engines. The new, improved flow of cooling air travels through venting in the new grill, over the new radiators and over the engine.
AVAILABLE ENGINE BRAKING
Engine braking is activated automatically when you release the throttle when transporting. It uses the compression of exhaust gas to slow the T9 tractor down, saving wear on the brake pads. Just step on the convenient floor pedal and the exhaust is restricted from leaving the valve and is compressed by the piston moving upwards. This compression of exhaust gas slows the tractor down.
AMPLE TORQUE AND SMOOTHER SHIFTING
With wider gears and extra clutch plates for more torque-carrying capacity, the transmissions on the new T9 Series turn power into productivity. Choose the New Holland 16F x 2R full powershift with Ground Speed Management to deliver plenty of working speeds and smooth shifting.
STANDARD 16 SPEEDS AND DUAL SETTINGS
The 16-speed full powershift transmission with Ground Speed Management (GSM) features both field and road operation settings. GSM Field™ automatically downshifts the tractor and adjusts engine rpm to maintain the best performance, then upshifts and changes engine rpm as load decreases. GSM Road™ selects the proper gears and engine rpm based on speed lever input and load conditions. Even without GSM, get clutch-free, push-button shifting and fingertip control of direction changes.
MORE SPEEDS WHERE YOU NEED THEM
Eight speeds in the tillage range (4 to 8.5 mph) are each spaced at half-mile-per-hour intervals. Finding the right speed for the job has never been easier.
CONVENIENCE OF FINGERTIP SHUTTLING
A shuttle lever to the left of the steering column and on the CommandGrip makes forward/reverse shuttling easy. Shift to first reverse when in first through eight gears just by moving the shuttle with your fingertips, without taking your hands off the wheel. Maneuver in tight quarters or connect to implements using the handy inch pedal.
INDUSTRY-LEADING HYDRAULIC POWER AND CONTROL
Whether you work with complicated air drills, heavy tillage equipment or large grain carts, New Holland T9 tractors can handle the most intense hydraulic applications.
STANDARD, HIGH-FLOW OR MEGAFLOW™
You get a choice of standard 42-gpm or high-flow 57-gpm hydraulic pump, with the option of adding the 56-gpm MegaFlow™ pump to either, to give you a total of up to 113 gpm! You select the right combination to match your specific needs. T9 tractors equipped with MegaFlow hydraulics can also be equipped with a PTO.
UP TO 8 ELECTRONIC REMOTE VALVES
All T9 models offer the convenience of electronic remote valves—up to eight of them. They’re simple to set up and easy to operate. All hydraulic controls and components are color-coded so it’s easy to keep track of hydraulic functions. The IntelliView™ III touch-screen display gives you precise control of individual valve flow, timing and detent settings.
EXTREME THREE-POINT LIFT CAPACITY
With a three-point lift capacity of 20,000 pounds, your T9 tractor can handle the largest mounted implements, including the heaviest planters, cultivators and specialized rippers.
RUGGED DESIGNS, FLEXIBLE APPLICATIONS
The redesigned T9 frame offers increased strength and rigidity to handle the toughest high-horsepower application and the necessary ballasting requirements.
TWO FRAME SIZES
New Holland T9 tractors come in two chassis sizes—the 36-inch standard frame and the 44-inch wide frame. The four models ranging from 354 to 507 engine horsepower feature the standard frame, making these models row-crop ready. The two largest models ranging from 542 to 608 engine horsepower use the wide frame for large-acreage, high-power applications.
BEST-IN-CLASS RIDE AND POWER TRANSFER
Both standard- and wide-frame models feature a longer wheelbase for outstanding stability. The result is a smooth ride and power transfer that’s the best in the industry.