Open Seam Tubes
The expert engineers at Roller Die are able to produce open seam tubes. Another roll formed shape, an open seam tube is typically formed from a sheet of metal roughly the thickness of a typical wall. The term ‘open’ refers to the gap of width (no greater than 25% of the outside diameter), which runs along the length of the tube. Open seam metal tubing can be produced from a wide variety of materials. Free tooling is likely available for this roll formed shape.
-
Most popular related searches
Product Details
- Hot Rolled Steel
- Cold Rolled Steel
- Structural Grade Steel Steel
- High Strength Low Alloy Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized
- 30-40 Ksi
- 30-40 Ksi
- 40-80 Ksi
- 40-80 Ksi
- 90+ Ksi
- Annealed through Full-Hard
- All standard coatings available for galvanized steel roll formed products
Roller Die is able to keep the price of Steel Angles low, due to our strategic buying when steel prices are low. We can ensure the lowest available material costs for all Steel Angle projects.
Tolerance Capabilities of Steel
Cross-Sectional Standard Tolerances: +/-.031″
Angularity: +/- 1 degree
Straightness: Maximum Deviation of .015″/ft
Twist: Maximum Deviation of 1/4 degree per ft
Length Tolerances of Steel Angles
Lengths up to 36″ : +/-.030″
Lengths 36″ to 120″ : +/-.060″
Lengths 120″ to 240″ : +/-.125″
Lengths greater than 240″ : +/-.250″
Roll Formed Steel Angles – In-Line Processes:
- Pre- and Post-Process Hole Piercings
- Inline Flying Cutoff Providing Parts Cut to Finished Length
- Stampings
- Welding
- Secondary Punching & Forming Operations
- Assembly
- Special Packaging
Customer reviews
No reviews were found for Open Seam Tubes. Be the first to review!